▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Obróbka metali i obrabiarki / Piły

Innovac maszyny-uzywane

Piły [1 - 20 of 56]

Piła tarczowa chłodnicza

Kaltenbach SKL 400NA

Niemcy

nieznany

używany

na żądanie

INNO32415

Length of infeed table: 6000mm, length of outfeed table: 4300mm, length: 2400mm, width: 1300mm, height: 1800mm, with saw blades and length stop as accessories and documentation, was not regularly maintained, without maintenance reports, no known defects.

W pełni zautomatyzowana piła taśmowa

Raim 22 AT

Niemcy

1990

używany

na żądanie

INNO32299

Cutting angle: 90°-45°, operating hours: approx. 4420h. Equipped with automatic material feed as well as roller conveyors on the left and right with ball-bearing rollers and storage compartments beneath the roller conveyors for short material sections. Including spare saw blades. The coolant was changed approx. 5 operating hours ago. An on-site inspection is possible.

Półautomatyczna piła taśmowa do cięć pod kątem

Berg & Schmid DGS 350/450 HA-I

Niemcy

2022

używany

na żądanie

INNO32282

Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible.

Przecinarka tarczowa do metalu na zimno

Hans Kaltenbach KKS 370

Niemcy

nieznany

używany

na żądanie

INNO32211

Cutting speeds: 30/60/130/260m/min, mains connection: 380V/50Hz three-phase, rated supply current: approx. 7.5A, upstream fuse: 20A slow-blow. An on-site inspection is possible.

Pozioma piła taśmowa

Hema HTR 600

Niemcy

2004

używany

na żądanie

INNO32176

Wheel diameter: 600mm, working height: 955mm, max. cutting height: 140mm, clearance height: approx. 5mm-300mm, clearance width: max. approx. 650mm, max. saw blade length: 5600mm, saw blade width: 8mm-25mm, max. saw blade thickness: 0.65mm, max. band speed: 1640m/min, conveyor belt speed: 0,5m/min - 5m/min, conveyor belt width: 650mm. Overall length with conveyor belt: 2820mm, overall width: 2550mm, overall height: 1800mm, machine weight: approx. 700kg. Documentation available. Inspection possible by arrangement.

Piła taśmowa

Tmj PP 502 G

Niemcy

nieznany

używany

na żądanie

INNO32118

A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement.

Piła taśmowa

Kasto SSB 260 VA

Niemcy

nieznany

używany

na żądanie

INNO32117

Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible.

Automatyczna piła taśmowa

Daiß + Partner HBA 500S G-LR

Niemcy

nieznany

używany

na żądanie

INNO32001

A Daiß + Partner CNC automatic band saw with a double-miter twin-column design is offered. Cutting capacity X/Y: 500mm/320mm, saw blade dimensions: 4700mm/34mm/1.1mm, feed length: 2000mm, rapid traverse: approx. 12m/min, blade speed: 15-105m/min, CNC control: PS 210. Equipment: powered chip brush, Power-Box hydraulic cutting pressure adjustment, Micro-Cooler coolant spray system, hydraulic saw blade tensioning and saw blade breakage monitoring. An on-site inspection is possible.

Piła taśmowa

Meba 420 G

Niemcy

1992

używany

na żądanie

INNO31994

A MEBA horizontal miter band saw is offered. Cutting diameter: 420mm, cutting capacity X/Y: 420mm/500mm, cutting speed: 15-150m/min, saw blade dimensions X/Y/Z: 5000mm/34mm/1.1mm, material support height: 750mm. Machine dimensions X/Y/Z: approx. 2300mm/1800mm/2000mm, weight: approx. 1200kg. Valve for the saw blade tension renewed in 2025. An on-site inspection is possible.

Podwójna piła ukosowa

Schüco B2A

Niemcy

nieznany

używany

na żądanie

INNO31958

A Schüco double miter saw for cutting aluminum and light metal profiles is available. Working length: 6000mm, saw units: 2, max. profile cross section X/Y: 150mm/100mm, min. cutting length: 400mm, speed: 2800rpm, cutting angle range: 45°-90°, saw blade diameter: 400mm. Documentation available. An on site inspection is possible.

Automatyczna piła taśmowa

Forte BA321/SJP

Niemcy

1997

używany

na żądanie

INNO31856

A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.

Piła tarczowa do metalu

Mep Tiger 352

Niemcy

2015

używany

na żądanie

INNO31711

A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible.

Piła tarczowa do metalu

Thomas 315 L SUP

Niemcy

1987

używany

na żądanie

INNO31696

Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment.

Piła tarczowa ukośna

Elumatec MGS 245/00

Niemcy

2002

używany

na żądanie

INNO31524

Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement.

Automatyczna piła taśmowa

Jaespa COMPACT 2

Niemcy

2011

używany

na żądanie

INNO31452

A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement.

Piła tarczowa chłodnicza

Trennjaeger LTS-400 M

Niemcy

1989

używany

na żądanie

INNO31449

A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.

Automat CNC do cięcia na zimno

Bewo SCF-90 Quatro

Niemcy

2008

używany

na żądanie

INNO31359

A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.

Piła taśmowa

Berg & Schmidt BS 280 Plus

Niemcy

1994

używany

na żądanie

INNO31310

English Translation A Berg & Schmit band saw in double-miter design including 20 new saw bands is available. Miter range: 60°-45°, cutting speed: 80m/min, cutting capacity round: 230mm, cutting capacity square: 230mm/230mm, cutting capacity rectangular: 280mm/150mm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1500mm, weight: approx. 350kg. The machine has a hydraulic oil leak. An on-site inspection is possible.

Piła taśmowa CNC

Macc 360 A

Niemcy

1995

używany

na żądanie

INNO31240

Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.

Piła taśmowa

Behringer HBP 220-HY

Niemcy

1994

używany

na żądanie

INNO31082

Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.