▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Prasy [41 - 60 of 96]

Prasa hydrauliczna

Lauffer RPT 68

Niemcy

1987

używany

na żądanie

INNO27919

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

Prasa hydrauliczna

Lauffer RMT 100

Niemcy

2002

używany

na żądanie

INNO27825

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

Prasa ekscentryczna

Ruhrmann EVR 125

Niemcy

nieznany

używany

na żądanie

INNO27764

Pressing force: 1250kN, stroke rate: 55/min, max. switching frequency: 50/min, ram stroke: 8mm-120mm, ram adjustment: 80mm, power: 7.5kW, safety clearance: 340mm, weight: approx. 8700kg. The machine has a hairline crack on the main shaft. On-site inspection is possible.

Wyciskanie na zimno

Dr. Fritsch KP 35

Niemcy

2000

używany

na żądanie

INNO27741

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Prasa ekscentryczna

Edelhoff DARR 1/80

Niemcy

1995

używany

na żądanie

INNO27707

A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible.

Hydrauliczna prasa grzewcza

Italpresse/joos GL9-6/188 / HP S80

Niemcy

2011

używany

na żądanie

INNO27682

Two heated hydraulic presses are available. 1) Italpresse GL9-6/188, year of manufacture: 2011, press force: 300t, spec. press force: 43kg/cm², cylinder: 6, cylinder diameter: 140mm, table dimensions X/Y: 1400mm/600mm, opening height: 400mm, heating plates: electric, drive power: 5.5kW. 2) Joos HP S80, year of manufacture: 2011, pressing force: 80t, plate dimensions X/Y: 2500mm/1250mm, piston diameter: 80mm, operating pressure: approx. 385bar, spec. pressing force: 2.5daN/cm², cylinders: 4, heating: electric, machine dimensions X/Y/Z: approx. 2900mm/1500mm/2100mm, weight: approx. 3300kg. On-site inspection is possible.

Prasa ekscentryczna

Weingarten AR 400

Niemcy

1976

używany

na żądanie

INNO27679

Pressing force: 400t, table length: 890mm, table width: 780mm, stroke: 180mm, ram stroke: 30-300mm, ram adjustment: 125mm, stroke rate: 55/min, safety distance: 400mm, drive power: 15kW. Machine dimensions X/Y/Z: approx. 2800mm/1000mm/3000mm, weight: approx. 14000kg.

Prasa hydrauliczna

Mae S10 RK

Niemcy

nieznany

używany

na żądanie

INNO27487

Pressing force: 10t, oil filling: 300l, max. pressure: 20bar, press type: C-column press, machine dimensions X/Y/Z: approx. 1250mm/1200mm/3000mm. On-site inspection is possible.

Prasa wielostopniowa

Peltzer & Ehlers GB 15-4

Niemcy

1977

używany

na żądanie

INNO27424

Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg.

Prasa dwukolumnowa hydrauliczna

Hydrap HPDB 315

Niemcy

1986

używany

na żądanie

INNO27346

Press force: 315t, stroke: 600mm, table dimensions X/Y: 2000mm/1200mm, ram area X/Y: 2000mm/1200mm, rapid stroke: 450mm/s, working speed range: 14mm-40mm/s, retraction speed: 300mm/s, table height: 900mm, oil volume: 2000l. Dimensions X/Y/Z: approx. 5000mm/3200mm/5000mm, weight: approx. 45000kg. A retrofit was carried out in 2016. Documentation available. On-site inspection is possible. Available from October 2024.

Prasa dziurkująca

Edel Stanzprofi 400

Niemcy

nieznany

używany

na żądanie

INNO27294

Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.

Prasa

Wmw KD2320

Niemcy

1971

używany

na żądanie

INNO27269

Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.

Prasa mechaniczna

Kaiser V400WR

Niemcy

2003

używany

na żądanie

INNO27242

Press force: 400t, stroke rate: 15-120/min, stroke adjustment (defective): 30mm-210mm, fixed stroke: 186mm, ram adjustment: 150mm, overall height: 350mm-576mm, max. belt width: 600mm, table dimensions X/Y: 2000mm/1400mm, shuttle tables on rails: Blue (220mm) and red (250mm), parts conveyor belt X/Y: 800mm/1800mm, dimensions X/Y: 20000mm/6000mm, operating hours: 32000h. Including conveyor system and change trolley. Documentation available. On-site inspection is possible.

Prasa hydrauliczna

Wmw PYE 63 S/1M

Niemcy

nieznany

używany

na żądanie

INNO27164

Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg.

Hydrauliczna prasa jednokolumnowa

Knuth HRP-150

Niemcy

1996

używany

na żądanie

INNO27163

Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg.

Prasa do gięcia krawędzi CNC

Eht EHPS 20-35

Niemcy

1995

używany

na żądanie

INNO27107

Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.

Obrotowa prasa krawędziowa

Strojáreň Piesok CK-2000/2A

Niemcy

1998

używany

na żądanie

INNO27070

A Strojáreň Piesok CK-2000/2A manual folding machine is available. Bending angle: 0°-135°, max. working width: 2040mm, max. material thickness: 2mm, max. upper beam stroke: 85mm, max. folding beam adjustment: 80mm, bending process: manual with eccentric weight support. Dimensions X/Y/Z: 3700mm/1250mm/450mm, weight: approx. 1700kg.

Prasa hydrauliczna

Wanzke HVZ 160/S

Niemcy

1998

używany

na żądanie

INNO26995

Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible.

Prasa hydrauliczna

Dunkes HZS 125

Niemcy

2000

używany

na żądanie

INNO26947

Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Trumpf TrumaBend V170

Niemcy

1997

używany

na żądanie

INNO26911

Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available.