▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Prasy [21 - 40 of 87]

Automatyczna prasa wykrawająca

Friedrich Petig RKP 5.8

Niemcy

2001

używany

na żądanie

INNO31392

An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi

Atlantic HPT 30135

Niemcy

1992

używany

na żądanie

INNO31309

Press force: 135t, bending length: 3000mm, nominal bending length: 2600mm, frame width: 2600mm, throat depth: 250mm, ram stroke: 120mm, working speed: 7mm/s, machine weight: approx. 6800kg. An on-site inspection is possible.

Prasa czterokolumnowa

Exner H4SP 340

Niemcy

1967

używany

na żądanie

INNO31303

A four-column stamping press Exner with electronics overhauled in 2011 is available. Press force: 340t, pressure cylinder: 1, pressure cylinder diameter: 380mm, ram stroke: 180mm, stroke adjustment: 100mm, installation height: 400mm, ram diameter: 260mm, table dimensions X/Y: 910mm/610mm, machine dimensions X/Y/Z: approx. 1300mm/1600mm/2950mm, weight: approx. 6500kg. An on-site inspection is possible.

Prasa krawędziowa

Safan SMK-K-40-2050

Niemcy

2002

używany

na żądanie

INNO31157

A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible.

Hydrauliczna prasa jednokolumnowa

Oevermann ESP 150

Niemcy

nieznany

używany

na żądanie

INNO31104

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

Prasa hydrauliczna

Müller SDZ 63.1.1

Niemcy

1978

używany

na żądanie

INNO31030

Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible.

Prasa ekscentryczna

Schuler PDv25/200

Niemcy

nieznany

używany

na żądanie

INNO30939

Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible.

Prasa ekscentryczna

Edelhoff AZR 7

Niemcy

1973

używany

na żądanie

INNO30938

A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible.

Prasa dwukolumnowa hydrauliczna

Schön SH/LF 650

Niemcy

1981

używany

na żądanie

INNO30937

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Prasa ekscentryczna

Helmerding EL25-B

Niemcy

1977

używany

na żądanie

INNO30934

An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible.

Jednokolumnowa prasa hydrauliczna

Dunkes HZ 25

Niemcy

1991

używany

na żądanie

INNO30913

Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

Jednokolumnowa prasa ekscentryczna

Kieserling & Albrecht Pedru 100

Niemcy

1990

używany

na żądanie

INNO30787

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

Prasa dwukolumnowa

Rhodes S2-350-60-36

Niemcy

nieznany

używany

na żądanie

INNO30708

Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Bystronic P225/410

Niemcy

2007

używany

na żądanie

INNO30611

A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Amada HFE M2 2204 L

Niemcy

2010

używany

na żądanie

INNO30270

A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible.

Prasa dwukolumnowa hydrauliczna

Weingarten HQR 315

Niemcy

1994

używany

na żądanie

INNO30188

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Prasa dziurkująca

Ebu HK 80 FR

Niemcy

2016

używany

na żądanie

INNO30150

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi

Knuth AHK 3180

Niemcy

2005

używany

na żądanie

INNO30043

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi

Durma/knuth APH 1335

Niemcy

1993

używany

na żądanie

INNO29997

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

Prasa dwukolumnowa hydrauliczna

Dunkes HDZ 400/160/6.3

Niemcy

1994

używany

na żądanie

INNO29963

Pressing force: 4000kN, pressing pressure: 320bar, oil pressure: 250bar, blank holder force: 1600kN, blank holder stroke: 200mm, blank holder dimensions X/Y: 1000mm/800mm, blank holder ejector force: 160kN, ejector force: 63kN, ejector stroke: 100mm, overrun distance: 40mm, overrun time: 190ms. Documentation available. An on-site inspection is possible.