▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka blachy stalowej [41 - 60 of 100]

Przewijarka

Burghardt & Schmidt VH 300/300

Niemcy

1996

używany

na żądanie

INNO30347

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

Linia do rozcinania taśm

Burghardt & Schmidt M201 B/250

Niemcy

1986

używany

na żądanie

INNO30346

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

Nożyce gilotynowe

Schuler ST2x1000

Niemcy

nieznany

używany

na żądanie

INNO30215

An electric guillotine shear L. Schuler (Göppingen) is available. Working width: 1000mm, max. sheet thickness iron/steel: 2.5mm/2mm, flywheel speed: 100rpm, power requirement: 4HP. An on-site inspection is possible.

Nożyce gilotynowe

Eisen U. Hammerwerk G.m.b.h

Niemcy

1980

używany

na żądanie

INNO30207

Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment.

Linia do produkcji cewek

Dimeco 1690 Opti-Master & Simo-Star

Niemcy

2008

używany

na żądanie

INNO29995

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

Wykrawarka

Finn-power F5S

Niemcy

2001

używany

na żądanie

INNO29994

Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi

Beyeler PR 10

Niemcy

2001

używany

na żądanie

INNO29993

Pressing force: 2000kN, working length: 7200mm, connected load: 15kW, max. oil temperature: 45°C, max. operating pressure: 200bar, max. material thickness S235: 8mm, max. stroke: 215mm, max. closing speed: 200mm/s, pressing speed range: 1mm/s-10mm/s, stop time: 90ms, safety distance: 290mm, weight: approx. 38000kg. Including underfloor equipment and Fiessler AKAS 160 S safety system, year of manufacture: 2013. Documentation available. An on-site inspection is possible.

Nożyce gilotynowe

Darley GS.3016

Niemcy

1975

używany

na żądanie

INNO29917

Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible.

Wykrawarka

Mubea KLH500/6.10

Niemcy

nieznany

używany

na żądanie

INNO29843

Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible.

Narzędzie do nitowania

Böllhoff SZ-26-50-50-30

Niemcy

nieznany

używany

na żądanie

INNO29645

A punch riveting tool Böllhoff is available. Documentation available. An on-site inspection is possible.

Nożyce do blachy

Schuler St 0,75x780

Niemcy

1955

używany

na żądanie

INNO29613

Sheet thickness iron: 0.75mm, sheet thickness steel: 0.5mm, working width: 780mm, stroke rate: 135/min. An on-site inspection is possible.

Maszyna wykrawająca

Illig ZSM 90

Niemcy

1969

używany

na żądanie

INNO29612

A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.

Nożyce do blachy

Eht TSS 4-31

Niemcy

1987

używany

na żądanie

INNO29331

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

Nitownica

Stanley Tucker T290 ERT 80

Niemcy

2016

używany

na żądanie

INNO29292

Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.

Kołowrotek

H. Schleicher H-3

Niemcy

1978

używany

na żądanie

INNO29218

Max. coil weight: 3t, max. strip width: 500mm, strip thickness: 0.4-5mm, connected load: 0.55kW. With control, straightener and hydraulic unit Rexroth, without documentation. On-site inspection is possible.

Szczotkarka do stali

Lissmac SBM-M 1500 B2

Niemcy

2014

używany

na żądanie

INNO29172

A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible.

Wykrawarka CNC

Amada EMK 3610 NT/MP300 M

Niemcy

2007

używany

na żądanie

INNO29137

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible.

Wykrawarka laserowa CNC

Trumpf Trumatic 600L

Niemcy

1995

używany

na żądanie

INNO29071

A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.

Wykrawarka

Hms EwZ 03 S7 90/GKNT 250

Niemcy

1990

używany

na żądanie

INNO28875

An HMS punching machine is available. Pressing force: 250t, stroke height: 40mm, installation height: 450mm, ram adjustment: 20mm, stroke rate: 120 strokes/min, overall system dimensions X/Y/Z: approx. 17000mm/8000mm/3500mm. Including coil and strip processing. Documentation available. On-site inspection is possible. Expected to be available from September 2025.

Wykrawarka CNC

Amada/lki EMZ3610NT/MP Sheetcat 3015

Niemcy

2010

używany

na żądanie

INNO28848

A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible.