▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Centra obróbcze [21 - 40 of 133]

Pionowe centrum obróbcze CNC

Avia VMC 650

Niemcy

2011

używany

na żądanie

INNO31737

A vertical machining center Avia is available. Travel X/Y/Z: 650mm/540mm/620mm, Table dimensions X/Y: 800mm/540mm, Max. table load: 700kg, Speed: 10000rpm, Tool holder: SK40, Tool stations: 24, Rapid traverse: 25m/min, Positioning accuracy: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2200mm/2600mm/2850mm, Weight: approx. 4200kg, Control: Heidenhain iTNC 530. Including 3D probe, Through-spindle coolant and chip conveyor. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Fehlmann PICOMAX 80 CNC 2/3-W

Niemcy

2006

używany

na żądanie

INNO31731

Offered is a Fehlmann CNC universal milling machine. Travel X/Y/Z/W: 700mm/315mm/178mm/495mm, feed rate X/Y: 9m/min, feed rate Z/W: 4m/min, rapid traverse X/Y: 9m/min, rapid traverse Z: 4m/min, table dimensions X/Y: 1130mm/350mm, max. table load: 250kg, spindle taper: SK30, tool positions: 32, max. speed: 9200rpm, spindle power: 5kW, drilling capacity in steel: 30mm, reach: 370mm, distance table-spindle: 620mm, control: Heidenhain. Weight: approx. 3400kg. Inspection possible by appointment.

Centrum obróbcze CNC

Hurco VMX40

Niemcy

2001

używany

na żądanie

INNO31721

A Hurco CNC vertical machining center is available. Spindle power: 15kW, torque: 238Nm, travel X/Y/Z: 1060mm/510mm/610mm, table dimensions X/Y: 1020mm/610mm, tool holder: SK40, tool stations: 24, spindle speed: 10000rpm. Machine dimensions X/Y/Z: approx. 2800mm/3050mm/2800mm, weight: approx. 5900kg, control system: Ultimax. An on-site inspection is possible.

Centrum obróbcze CNC

Hurco VMX50T

Niemcy

2008

używany

na żądanie

INNO31716

A repair-required Hurco vertical 3-axis machining center is offered, including spindle through-coolant, 3D tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, rapid traverse: 30m/min, feed rate: 15m/min, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool positions: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment.

Centrum obróbcze CNC

Hurco VMX64 / 40T

Niemcy

2002

używany

na żądanie

INNO31715

A CNC machining center by Hurco requiring repair is offered, including spindle through-coolant and a chip conveyor. Travels X/Y/Z: 1625mm/860mm/760mm, operating hours: approx. 39025h, max. spindle speed: 8000rpm, tool stations: 40, tool holder: HSK40, cover of the Z-axis is defective. Inspection possible by appointment.

Centrum obróbcze CNC

Mikron UM 710/900

Niemcy

1998

używany

na żądanie

INNO31710

A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible.

Centrum obróbcze CNC

Mazak VTC 200-B II

Niemcy

2005

używany

na żądanie

INNO31709

A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Fischer Maschinenbau MBZ-2 72/80-5-FE

Niemcy

2001

używany

na żądanie

INNO31674

A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Hurco VMX50S

Niemcy

2003

używany

na żądanie

INNO31662

A vertical CNC machining center is offered. Table diameter: 320mm, travels X/Y/Z: 1270mm/660mm/610mm, spindle speed: 16000rpm, tool holder: SK40, number of axes: 4, rapid traverse: 30000mm/min, max. feed rate: 15240mm/min, rotary table spindle bore: 105mm, rotary table center height: 225mm, control system: WINMAX MIL, overall dimensions X/Y/Z: approx. 4750mm/3200mm/3000mm, weight: approx. 9000kg, operating hours: approx. 61762h. Including a Yaskawa spindle motor and Hurco transport equipment. Documentation available. Inspection possible by appointment. Expected to be available from December 2026.

Centrum obróbcze CNC

Mikron VCP 1000 TNC 426 PB

Niemcy

1997

używany

na żądanie

INNO31658

Travel X/Y/Z: 1000mm/750mm/750mm, table-spindle distance range: 118mm-865mm, table dimensions X/Y: 1150mm/700mm, max. table load: 1000kg, speed: 12000rpm, tool positions: 30, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4500mm/3200mm/3100mm, weight: approx. 9500kg, spindle hours: 3427h. The tool changer is defective. Revisions in 2023: Z motor, axis lubrication, Z-axis guide carriage, Z module and interface. Documentation available. An on-site inspection is possible.

5-osiowe centrum obróbcze CNC

Maka Systems Gmbh Moving Beam BC150t compact

Niemcy

nieznany

używany

na żądanie

INNO31644

A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment.

Centrum obróbcze CNC

Chiron FZ 18K L

Niemcy

2001

używany

na żądanie

INNO31638

A Chiron CNC vertical machining center is available. Travel X/Y/Z: 2000mm/520mm/630mm, table dimensions X/Y: 2600mm/570mm, max. table load: 1000kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 4500mm/3250mm/3600mm, weight: approx. 11400kg, control system: Heidenhain TNC 426/430M, operating hours: approx. 50682h. Including coolant system, chip conveyor, filtration system and paper band filter system. The Y-axis cover is missing, the X-axis enclosure is brittle and the compressed air lines are partially porous. Documentation vorhanden. An on-site inspection is possible.

4-Osiowe centrum obróbcze do prętów

Elumatec SBZ 140

Niemcy

2018

używany

na żądanie

INNO31571

Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible.

Pionowe centrum obróbcze

Hurco VMX 64/40T

Niemcy

2003

używany

na żądanie

INNO31563

X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible.

Pionowe 5-osiowe centrum obróbcze CNC

Kao Fong Machinery KFO-620-5AX

Niemcy

2019

używany

na żądanie

INNO31556

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Fair Friend Enterprise Co. VB715A FEELER

Niemcy

2003

używany

na żądanie

INNO31538

Number of axes: 3, max. speed: 6000rpm, compressed air connection: 6-8bar, main motor power: 20HP, control system: Fanuc Series 18-M, weight: 12t, without documentation. An on-site inspection is possible.

Pionowe centrum obróbcze

Mazak Vertical Centre Nexus 410A

Niemcy

2005

używany

na żądanie

INNO31508

Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement.

Centrum obróbcze CNC

Hurco VMX 60t

Niemcy

2011

używany

na żądanie

INNO31507

Offered is a vertical three-axis machining center. Travels X/Y/Z: 1524mm/660mm/610mm, table: 1675mm x 660mm, spindle speed: 12000rpm, tool holder: SK40, tool changer: 24 positions, spindle hours: 1937h (spindle replaced 10/2019), chip disposal: scraper conveyor, control system: WinMax. Equipped with 3D probe Renishaw, scraper chip conveyor, coolant system, spindle cooler, coolant spray gun, chip splash protection enclosure, flushing system for chip removal, electronic handwheel, rigid tapping, DXF software, cooling air through spindle switchable. Weight: approx. 8400kg, overall dimensions X/Y/Z: approx. 4650mm/3470mm/3030mm. Inspection possible by arrangement.

Poziome centrum obróbcze

Toyoda Mitsui FA630S

Niemcy

2008

używany

na żądanie

INNO31497

Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement.

Poziome centrum obróbcze

Toyoda Mitsui FH550SX

Niemcy

2005

używany

na żądanie

INNO31496

Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement.