Giętarka czterowalcowa okrągła

Franz Kramer RHM III 130/2000

Niemcy

1987

używany

na żądanie

INNO30984

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

więcej

Piła taśmowa

Meba 260 GP

Niemcy

2011

używany

na żądanie

INNO30983

Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.

więcej

Obrabiarka zespołowa

Riello AZ

Niemcy

1993

używany

na żądanie

INNO30981

A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible.

więcej

Lakiernia

B+m/carel/hygrex T2/LZ/APRA/AGMD

Niemcy

2019

używany

na żądanie

INNO30980

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

więcej

Wiertarko-frezarka CNC

Soraluce SL 6000

Niemcy

2014

używany

na żądanie

INNO30979

A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible.

więcej

Obcinarka do rur

Hgg SPC 330

Niemcy

2011

używany

na żądanie

INNO30978

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

więcej

Frezarka do płytek

Wissner Witec 3015 Performance

Niemcy

2002

używany

na żądanie

INNO30976

Two CNC dual spindle PCB milling machines Wissner are available. Spindle power: 3.6kW, min. cutter diameter: 2mm, max. speed: 40000rpm, machining dimensions X/Y/Z: 3000mm/1250mm/100mm, max. feed rate X/Y: 20m/min, max. feed rate Z: 4m/min, clamping device: vacuum, vacuum capacity: -0.9bar, max. sheet thickness: 6mm, axes: 3, tool positions: 2x8, control: Heidenhain/CATIA V5/ASCO, years of manufacture: 2002/2003. Documentation available. An on site inspection is possible.

więcej

Szlifierki do wałków CNC

Karstens K19-SL650

Niemcy

1997

używany

na żądanie

INNO30975

A CNC cylindrical grinding machine Karstens including a coolant system Knoll VRF 150/620 (1997) and an emulsion separator KGH KFM-1200 (2000) is available. Grinding length: 650mm, center height: 190mm, max. grinding diameter: 3800mm, max. workpiece weight between centers/flying: 250kg/100kg, table swivel: +/-12.5°, table feed: 4m/min, machine dimensions X/Y/Z: approx. 3250mm/2150mm/1800mm, weight: approx. 3500kg, control: CNC 20. An inspection on site is possible.

więcej

System czyszczący

Wache 1-Kammer

Niemcy

1996

używany

na żądanie

INNO30974

An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible.

więcej

Frezarka profilowa CNC

Cms Mupex 150

Niemcy

1995

używany

na żądanie

INNO30973

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

więcej

Frezarka

Klaaßen SM 18

Niemcy

2001

używany

na żądanie

INNO30972

A CNC spindle machine Klaaßen is available. Main motor power: 12kW, tool interface: HSK-63, speed: 6000rpm, max. machining dimensions X/Y/Z: 1800mm/1800mm/445mm, feed rate: 15m/min, indexing angle: 4x90°, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible.

więcej

Laminator

Softal CMIE-125-1KB3

Niemcy

2023

używany

na żądanie

INNO30962

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

więcej

Piec do suszenia

Horo 2736 AL-BGL

Niemcy

2013

używany

na żądanie

INNO30961

A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible.

więcej

Obrotnica do spawania

Jucat JCP 6000

Niemcy

2015

używany

na żądanie

INNO30952

A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.

więcej

Obrotnica do spawania

Jucat JCP 6000

Niemcy

2014

używany

na żądanie

INNO30951

A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.

więcej

Maszyna plazmowa

Plasma Technology PlasmaFlecto 30

Niemcy

2015

używany

na żądanie

INNO30949

Two plasma machines Plasma Technology for surface cleaning and pretreatment are available. Vacuum chamber internal dimensions X/Y/Z: 190mm/190mm/320mm, vacuum chamber volume: 11.5l, plasma generator power: 400W, working pressure range: 0.05mbar-0.6mbar, max. process gas prepressure: 2bar, machine dimensions X/Y/Z: approx. 500mm/300mm/600mm. Documentation available. An on site inspection is possible.

więcej

Pionowe centrum obróbcze CNC

Hurco VMX 24

Niemcy

2004

używany

na żądanie

INNO30940

A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible.

więcej

Prasa ekscentryczna

Schuler PDv25/200

Niemcy

nieznany

używany

na żądanie

INNO30939

Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible.

więcej

Prasa ekscentryczna

Edelhoff AZR 7

Niemcy

1973

używany

na żądanie

INNO30938

A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible.

więcej

Prasa dwukolumnowa hydrauliczna

Schön SH/LF 650

Niemcy

1981

używany

na żądanie

INNO30937

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki