Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1 - 20 of 2762]

Składarka

Bäuerle prestigeFOLD net38-0-4/prestigeFOLD net38-6 FSA

Niemcy

nieznany

używany

na żądanie

INNO31333

Two cross folding systems MB Bäuerle are available. 1.1) Buckle folding machine Bäuerle prestigeFOLD NET 52, max. sheet format: 520mm/850mm, min. sheet format: 100mm/120mm, max. folding length: 480mm, paper weight range: 40g-250g/m², max. throughput performance: 220m/min, folding units: 2, buckle plates: 6/4, module: PFNet 52/0/4-40. 1.2) Feeder FSA 52, stack capacity: 4500 sheets, max. speed: 150m/min. 1.3) Vertical sheet small format delivery SKM 36 NET, max. inlet width: 360mm. 2.1) Buckle folding machine Bäuerle prestigeFOLD NET 38, configuration: 6/4-FSA, max. sheet format: 380mm/750mm, max. folding length: 480mm, paper weight range: 40g-250g/m², max. throughput performance: 220m/min, folding units: 2, buckle plates: 6/4, module: PFNet 38/0/4, module: PFNet 38/6 FSA. Including various spare parts. Documentation available. An on-site inspection is possible.

Pojazd przemysłowy

Plan PDFT 3B/DLF

Niemcy

1990

używany

na żądanie

INNO31332

An industrial vehicle that has been converted into a mobile filling station is available. Load capacity: 3000kg, max. front/rear axle load: 1930kg/2870kg, max. total weight: 4800kg, engine: Perkins diesel. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Ferromatik K-Tec 85

Niemcy

2000

używany

na żądanie

INNO31331

Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible.

Zgrzewarka laserowa

Trumpf TruLaser Station 5004

Niemcy

2010

używany

na żądanie

INNO31330

A compact Trumpf CNC laser welding station is available. Laser source: TruPulse 124, wavelength: 1064nm, max. average power: 140W, min. pulse power: 300W, max. pulse power: 6000W, pulse duration range: 0.3ms-50ms, max. pulse energy: 30J, max. pulse frequency: 833Hz, travel X/Y/Z: 450mm/300mm/300mm, travel speed: 3m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.02mm, rotary table diameter: 120mm, rotational speed: 80rpm, max. table load: 50kg, machine weight: approx. 650kg. Documentation available. An on-site inspection is possible.

Maszyna wykrawająca

Boschert EvoLine 300 digital

Niemcy

2012

używany

na żądanie

INNO31329

A manual punching machine Boschert with a digital display is available. Throat depth: 300mm, travel X: 500mm, punching force: 280kN, max. sheet thickness: 6mm. Including digital display and stops. Documentation available. An on-site inspection is possible.

Prasa krawędziowa

Boschert Profi Bend 28/1000 CNC

Niemcy

2012

używany

na żądanie

INNO31328

A CNC press brake Boschert is available. Press force: 28t, bending length: 1000mm, max. sheet thickness: 10mm, tool clamping: WILA, backgauge axes: 2, stop faces: 4, repeatability: +/-0.02mm, control: Cybelec ModEva Pac/CybTouch 15. Including accessories. Documentation available. An on-site inspection is possible.

Dziewiarka płaska

Stoll CMS

Niemcy

nieznany

używany

na żądanie

INNO31327

Various flat knitting machines with different gauges and Groz-Beckert needle sets are available. 1) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 2) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 3) Stoll CMS 303 TC, gauge: E12, nominal width: 1270mm, needle set: 12. 4) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 5) Stoll CMS 340 TC, gauge: E12, needle set: 12. 6) Stoll CMS 411, gauge: E10, needle set: 10. 7) Stoll CMS 422 TC, gauge: E12, needle set: 12. 8) Stoll CMS 422 TC, gauge: E12, needle set: 12. 9) Stoll CMS 422.6, gauge: E12, needle set: 10. 10) Stoll CMS 422.6, gauge: E12, needle set: 10. 11) Stoll CMS 422.6, gauge: E14. 12) Stoll CMS 422.6, gauge: E14. 13) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 12. 14) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 10. 15) Stoll CMS 430.6, gauge: E12. 16) Stoll CMS 922, gauge: E12, needle set: 12. 17) Stoll CMS 922, gauge: E12, needle set: 12. 18) Stoll CMS 933 HP, gauge: E14. 19) Stoll CMS 933 HP, gauge: E12-10, needle set: 12. 20) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 21) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 22) Stoll IBOM/b, gauge: E14, nominal width: 180mm. 23) Stoll IBOM/c, gauge: E14, nominal width: 200mm. Including 2 needle sets and various conversion kits Stoll, Groz-Beckert and Universal. Documentation available. An on-site inspection is possible. The machines are still in operation and are maintained and well-kept. Individual sale possible.

Tokarka CNC

Spinner TC 32-MC

Niemcy

2002

używany

na żądanie

INNO31326

A lathe Spinner requiring repair is available. Travel X/Z: 96mm/245mm, max. turning length: 245mm, max. swing diameter: 120mm, turning diameter over bed: 290mm, spindle bore: 42mm, speed: 6000rpm, rapid traverse: 15m/min, tool stations: 12, tool holder: VDI16, bar passage: 42mm. Machine dimensions X/Y/Z: approx. 4400mm/1200mm/2200mm, weight: approx. 3000kg, control: Siemens Sinumerik ShopTurn. Including bar feeder and drawer contents. The machine has the following problems: high measuring inaccuracy, problems with the handwheel and measuring arm as well as measurement deviation. Documentation available. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Spinner MC 650

Niemcy

2006

używany

na żądanie

INNO31325

A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible.

Tokarka rewolwerowa

Leinen LC

Niemcy

1980

używany

na żądanie

INNO31324

An old, compact precision turret lathe Boley & Leinen is available. Speed: 4000rpm, tool stations: 6, center height: 90mm, distance between centers: 300mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Emco VMC 2000

Niemcy

1991

używany

na żądanie

INNO31323

A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Takumi V18A

Niemcy

1998

używany

na żądanie

INNO31322

A CNC vertical machining center Takumi is available. Travel X/Y/Z: 1800mm/850mm/750mm, spindle nose to table distance range: 200mm-950mm, spindle center to column distance: 920mm, table dimensions X/Y: 2000mm/800mm, max. table load: 2200kg, tool holder: NT50, speed: 6000rpm, feed rate: 5m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm, weight: approx. 16500kg, control: Heidenhain, operating hours: approx. 50000h, spindle hours: approx. 25000h. Documentation available. An on-site inspection is possible.

Frezarka CNC

Emco EmcoMill E900

Niemcy

2013

używany

na żądanie

INNO31321

A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible.

Wieża SMD

Royonic

Niemcy

2017

używany

na żądanie

INNO31320

Four identical component storage towers Royonic Mycronic are available. Software: STSys SMDSoftware, version: 2.2.2.0, tower firmware: 78, capacity (7 inch reels): approx. 1000, light tower: yes, terminal light: no, external display: no, 2D internal scanner: yes, express unloading: yes, Agilis Pallet: no. Documentation available. An on-site inspection is possible.

Instalacja do odgazowywania i impregnacji CO2

Jakü PM-0-I-100

Niemcy

2017

używany

na żądanie

INNO31319

A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Deckel Maho DMG DMU 80T

Niemcy

1996

używany

na żądanie

INNO31318

Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible.

Centrum tokarskie CNC

Biglia B 436 Y2

Niemcy

2015

używany

na żądanie

INNO31317

A double-turret and double-spindle turning center Biglia including peripherals is available. Spindle power: 11kW/11kW, speed: 7000rpm, bar capacity: 36mm-37.5mm, max. turning diameter: 100mm, max. turning length: 140mm, tool stations: 2×12, Y-axis travel: +/-25mm, X/Z-axis travel: 85mm/300mm, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 3700mm/1450mm/1900mm, weight: approx. 5000kg, control: Mitsubishi M730 with editor, power-on hours: approx. 47000h. Including FMB turbo 3-36 bar loader, Knoll KF10 coolant system, 700l tank, air cleaning unit and an extensive package of collets and tools. Documentation available. An on-site inspection is possible. Expected to be available starting October 2026.

Filtr warstwowy

Schenk FI1000/150A

Niemcy

1972

używany

na żądanie

INNO31316

A filter system from brewery operations is available. Plate dimensions X/Y: 1000mm/1000mm, filter area: 1m²/plate, number of layers: 86, throughput capacity: 150hl/h, operating pressure: 8bar. The hydraulics were overhauled in 2019. An on-site inspection is possible.

Wiertarka do szkła

Schraml Glastechnik Top Drill TD118

Niemcy

nieznany

używany

na żądanie

INNO31315

A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.

Centrum obróbcze CNC

Fehlmann Picomax 90-M

Niemcy

2002

używany

na żądanie

INNO31314

A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible.