▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [81 - 100 of 1214]

Tokarka CNC

Traub TNK 36

Niemcy

2002

używany

na żądanie

INNO31867

A factory-reconditioned CNC counter-spindle lathe from Traub, overhauled in 2018, including a bar feeder, is available. Main spindle bore: 36mm, speed: 6300rpm, counter spindle bore: 32mm, speed: 6300rpm, Z4 travel: 250mm, rapid traverse Z4: 30m/min, max. workpiece length: 200mm, max. workpiece diameter: 32mm, control system: Traub/Index TX8i, operating hours: approx. 147000h. Upper tool carrier: X2 travel: 50mm, Y2 travel: +/-20mm, Z2 travel: 100mm, rapid traverse X2/Y2/Z2: 15m/min, tool stations: 12, speed: 6000rpm. Front tool carrier: tool stations: 5, X3 travel: 370mm, Z3 travel: 250mm, rapid traverse X3/Z3: 30m/min, max. tool diameter: 40mm, speed: 6000rpm. Rear tool carrier: X4 travel: 73mm, Y4 travel: +/-150mm, tool stations: 5, rapid traverse X4/Y4: 15m/min, tool diameter: 40mm, speed: 6000rpm. Including Resy compact belt filter, Knoll 240S-1/100 hinge-belt conveyor, travelling workpiece stop, bar magazine mounting preparation, Brankamp CSM 100 collision monitoring system and FMB Turbo 5-42 X bar magazine, year of manufacture: 2002. Documentation available. An on-site inspection is possible.

Maszyna do cięcia laserowego CNC

Amada LC2414 Alpha IV NT

Niemcy

2010

używany

na żądanie

INNO31866

A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible.

Polerka przelotowa wibrościerna

Walther Trowal ZM 03-FL/MV 21

Niemcy

2017

używany

na żądanie

INNO31865

A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible.

Podajnik baru

Kft Radid Load 15

Niemcy

2001

używany

na żądanie

INNO31864

A KFT bar feeder is offered. Bar diameter: approx. 15mm, Bar length range: approx. 150mm/1215mm, Magazine width: approx. 600mm, Material change time: approx. 18-25s, Alignment accuracy: +/-0.5mm. Machine dimensions: approx. 3000mm/750mm/1500mm, Weight: approx. 250kg. Inspection possible by appointment.

Frezarka narzędziowa CNC

Maho MH 800 E

Niemcy

1988

używany

na żądanie

INNO31863

A Maho CNC universal tool milling and drilling machine is available. Travel X/Y/Z: 800mm/450mm/500mm, Table dimensions X/Y: 1200mm/600mm, Tool holder: SK40, Speed: 3150rpm, Feed rate: 1500mm/min, Rapid traverse: 3m/min, Quill stroke: 50mm, Resolution: 0.001mm. Machine dimensions X/Y/Z: approx. 3850mm/4400mm/2050mm, Weight: approx. 4100kg, Control: Philips CNC 432. The machine was partially overhauled in 2006. Documentation vorhanden. An on-site inspection is possible.

Automatyczna giętarka do drutu CNC

Wafios BMU 4

Niemcy

2007

używany

na żądanie

INNO31862

A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Matec 30 HV/NC

Niemcy

2012

używany

na żądanie

INNO31861

A Matec CNC machining center is offered. Travel X/Y: 3000mm/800mm, horizontal Z travel: 800mm, vertical Z travel: 700mm, B-axis: +/-105°, NC rotary table diameter: 800mm, rapid traverse: 30m/min, feed rate: 30m/min, spindle taper: SK40, max. spindle speed: 12000rpm, spindle power: 30kW, tool magazine: 60, operating hours (04.02.2026): 50106h, control system: Rexroth IndraMotion MTX with Siemens Operate. Machine dimensions X/Y/Z: approx. 7160mm/5400mm/3200mm, weight: approx. 15t. Expected to be available from the end of 2026. Documentation available. Inspection possible by prior arrangement.

Tokarka

Hitachi Seiki HT 20 S II

Niemcy

nieznany

używany

na żądanie

INNO31858

A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible.

Automatyczna piła taśmowa

Forte BA321/SJP

Niemcy

1997

używany

na żądanie

INNO31856

A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.

Centrum do cięcia strumieniem wody

Flow Europe HyPlex 50

Niemcy

2006

używany

na żądanie

INNO31854

A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible.

Nożyce gilotynowe

Ras 86.43

Niemcy

2000

używany

na żądanie

INNO31853

Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible.

Giętarka czterorolkowa

Haeusler VRM-hy 3000x70

Niemcy

1978

używany

na żądanie

INNO31850

A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.

Maszyna CNC do erodowania drutu

Sodick AQ750L

Niemcy

2005

używany

na żądanie

INNO31849

A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible.

System spawania na robotach

Cloos ROMAT 310 / ROTROL II-D

Niemcy

2002

używany

na żądanie

INNO31846

A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement.

Linia montażowa skrzydeł okiennych

Ruchser/max Striffler RU-GOB-ES

Niemcy

2007

używany

na żądanie

INNO31845

A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only.

Maszyna do czyszczenia części

Ibs Scherer BK-50

Niemcy

2006

używany

na żądanie

INNO31842

A compact, manual parts cleaning unit (brush wash table) IBS Scherer is offered, designed for the material-friendly cleaning of oil- and grease-contaminated metal and plastic parts. Max. load capacity: 50kg, Capacity: 50l, Working height: approx. 820mm, Working surface internal dimensions X/Y: 646mm/465mm, Weight: approx. 15kg, Machine dimensions X/Y/Z: approx. 656mm/475mm/1005mm. Inspection possible by appointment.

Centrum obróbcze CNC

Quick Jet Depo-Jet

Niemcy

2001

używany

na żądanie

INNO31840

A CNC vertical machining center Quick Jet is offered. Travel X/Y/Z: approx. 1200mm/800mm/700mm, spindle taper: HSK-A80, max. spindle speed: 14000rpm, spindle power: 25kW, spindle torque: 170Nm, tool magazine: 16, max. tool length: approx. 300mm, max. tool diameter: 100mm, max. tool weight: 7kg, rapid traverse X/Y/Z: 24m/min, distance between table surface and spindle nose: 100mm-800mm, table size X/Y: 1350mm/1300mm, max. workpiece weight: 8000kg, control: Heidenhain TNC 530. Including HSK-A80 tool holder inventory. Machine dimensions X/Y/Z: approx. 3335mm/2780mm/3595mm, weight: approx. 11050kg. Inspection possible by appointment.

Automat CNC do cięcia na zimno

Kaltenbach SKL 400 NA

Niemcy

1994

używany

na żądanie

INNO31839

A refurbished Kaltenbach CNC cold circular saw with an L45NC length stop is available. Year of refurbishment: 2016, max. feed length: 1000mm, miter adjustment: +/-90°, saw blade dimensions X/Y/Z: 400mm/3.2mm/40mm, max. cutting diameter: 130mm, max. cutting capacity for rectangular material: 315mm/40mm, max. cutting capacity for square material: 120mm/120mm, cutting speed: 3000m/min, saw blade feed range: 0mm-1100mm/min, max. material feed speed: 10m/min, machine dimensions X/Y/Z: approx. 2350mm/1250mm/1800mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible.

Tokarka CNC

Traub TNM 42

Niemcy

1993

używany

na żądanie

INNO31836

A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115mm, max. back-side machining speed: 5600rpm, back-side machining torque: 18Nm, drilling/thread cutting station clamping range: 1mm-16mm, max. Q-axis working stroke: 25mm, max. drilling spindle speed: approx. 3500rpm, max. thread cutting spindle speed: approx. 1000rpm, weight: 3200kg, machine dimensions: approx. 2500mm/1120mm/1620mm. Inspection by appointment possible.

Wiertarka rzędowa

Gillardon R25

Niemcy

nieznany

używany

na żądanie

INNO31835

A conventional Gillardon multi-spindle drilling machine is available. Drilling units: 4, spindles: 4, drilling capacity in steel: 25mm, tapping capacity: M20, drilling stroke: 150mm, speed: 3000rpm/1400rpm. An on-site inspection is possible.