▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [941 - 960 of 1171]

Piec obrotowy

Tanabe

Niemcy

2023

używany

na żądanie

INNO27787

An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for local operation, 3x HMIs, several control panels and control cabinets. Including various accessories such as spare parts, transportation aids and associated smaller devices. The entire system is brand new and is still in its original packaging. The pictures were taken at the place of manufacture. Documentation available. On-site inspection is possible.

Frezarka CNC

Dmg Mori CMX 1100 V

Niemcy

2019

używany

na żądanie

INNO27777

Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible.

Wyciskanie na zimno

Dr. Fritsch KP 35

Niemcy

2000

używany

na żądanie

INNO27741

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Shw UFZ 6L

Niemcy

1990

używany

na żądanie

INNO27719

A CNC universal milling and drilling center SHW is available. Travel X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44000kg. Documentation available. On-site inspection is possible.

Frezarka

Dpm

Niemcy

nieznany

używany

na żądanie

INNO27706

An NC bed milling machine DPM (Digital Precision Machine) with defective control is available. Travel X/Y/Z: approx. 800mm/430mm/600mm, table dimensions X/Y: 1270mm/255mm, spindle mount: R8/CAT40, speed: 5000rpm, spindle power: 2.2kW, max. table load: 340kg, rapid traverse: 2.54m/min. Dimensions X/Y/Z: approx. 2000mm/2600mm/2300mm, weight: approx. 2500kg. On-site inspection is possible.

Szlifierka powierzchniowa

Wmw SFW200x600/2

Niemcy

1988

używany

na żądanie

INNO27692

Sanding width: 200mm, sanding length: 600mm, adjustment path X/Y: 690mm/230mm, clamping table spindle center distance: 500mm, sanding wheel diameter: 200mm, sanding wheel width: 20mm, bore: 51mm, table dimensions X/Y: 200mm/600mm, max. table load: 110kp, machine dimensions X/Y/Z: approx. 3000mm/1600mm/2100mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

Frezarka

Johannsen/bfm/böhme/schanbacher/fleckstein T8E/30

Niemcy

1981

używany

na żądanie

INNO27649

Various metalworking machines are available. 1) Johannsen T8E belt grinder, year of manufacture: 1979, table dimensions X/Y: 1900mm/800mm, machine dimensions X/Y/Z: approx. 3200mm/1000mm/1250mm, weight: approx. 530kg. 2) Milling machine BFM 30, year of construction: 1981, machine dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm, weight: approx. 360kg. 3) Böhme router, machine dimensions X/Y/Z: approx. 800mm/900mm/1550mm, weight: approx. 320kg. 4) Fleckstein router, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. 5) Fleckstein horizontal milling machine, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. On-site inspection is possible.

Szlifierki do wałków

Fortuna AFB500 AS

Niemcy

1955

używany

na żądanie

INNO27634

Center height: 135mm, max. sanding length (shaft): 500mm, max. sanding diameter: 270mm, sanding wheel diameter: 400mm, power requirement: 7.5kW, machine dimensions X/Y/Z: approx. 2000mm/1300mm/1300mm, weight: approx. 1700kg.

Instalacja chłodzenia

Ruez

Niemcy

2022

używany

na żądanie

INNO27623

A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible.

Piec hartowniczy

Caldatrac CDF 60/90/60

Niemcy

2001

używany

na żądanie

INNO27580

Internal dimensions X/Y/Z: 600mm/900mm/600mm, nominal temperature: 350°C, heating capacity: 13.5kW, usable space: 0.32m³, total steam space: 0.57m³, min. exhaust air volume flow: 120m³/h.

Odlewnia ciśnieniowa

Oskar Frech DAK 200

Niemcy

1989

używany

na żądanie

INNO27574

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

Pozioma piła taśmowa

Bauer HS 300 A

Niemcy

1990

używany

na żądanie

INNO27555

Saw blade dimensions: 3660mm/27mm/0.9mm, cutting range at 90° round material/flat material: 300mm/385mm x 220mm, saw blade speed: 20m-70m/min, saw blade roller diameter: 450mm, power: 1.5kW, machine dimensions X/Y/Z: approx. 220mm/1500mm/1200mm. On-site inspection is possible.

Piła taśmowa

Knuth

Niemcy

2010

używany

na żądanie

INNO27553

A Knuth band saw is available. Power: 0.75kW, voltage: 400V, frequency: 50Hz. On-site inspection is possible.

Tokarka pionowa CNC

Gildemeister CTV 250

Niemcy

2002

używany

na żądanie

INNO27550

Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Harrison Alpha 400 Plus

Niemcy

1997

używany

na żądanie

INNO27527

Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible.

Symultaniczne centrum tokarskie CNC

Spinner TTS65-Triplex

Niemcy

2019

używany

na żądanie

INNO27526

A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible.

Frezarka kopiująca

Mühlacker

Niemcy

1982

używany

na żądanie

INNO27500

Travel Z: 120mm, clamping range: 190mm/160mm, speed: 12000rpm, compressed air connection: 6bar.

Prasa do gięcia krawędzi CNC

Weinbrenner GP320/4050

Niemcy

2008

używany

na żądanie

INNO27459

Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available.

System cięcia laserem CO2

Prima Power Platino 1530/CP 3000

Niemcy

2011

używany

na żądanie

INNO27428

A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025.

Centrum obróbcze CNC

Mori Seiki Partner M-300

Niemcy

1990

używany

na żądanie

INNO27427

Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible.