▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [901 - 920 of 1129]

Centrum obróbcze CNC

Mori Seiki Partner M-300

Niemcy

1990

używany

na żądanie

INNO27427

Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible.

Prasa wielostopniowa

Peltzer & Ehlers GB 15-4

Niemcy

1977

używany

na żądanie

INNO27424

Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg.

Procesor plazmy atmosferycznej

Diener PlasmaBeam Standard

Niemcy

2020

używany

na żądanie

INNO27408

Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible.

Wytaczarka pozioma

Tos Varnsdorf W9A

Niemcy

1981

używany

na żądanie

INNO27344

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

Dwuwrzecionowe centrum obróbcze CNC

Stama MC 536

Niemcy

2009

używany

na żądanie

INNO27333

Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.

Centrum obróbcze CNC

Axa VSC 1

Niemcy

1988

używany

na żądanie

INNO27313

Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.

Prasa dziurkująca

Edel Stanzprofi 400

Niemcy

nieznany

używany

na żądanie

INNO27294

Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.

Tokarka i frezarka CNC

Kekeisen VFB 2000

Niemcy

2012

używany

na żądanie

INNO27282

Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Axa DBZ 2

Niemcy

2012

używany

na żądanie

INNO27230

Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available.

Frezarka

Steinel BZ20

Niemcy

1982

używany

na żądanie

INNO27209

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

Wiertarka do głębokich otworów

Tbt T30-1000 KTN/NC

Niemcy

nieznany

używany

na żądanie

INNO27205

Travel X/Y/Z: 700mm/300mm/1000mm, rapid traverse X/Y/Z: 4000mm/4000mm/2000mm /min, drilling method: ELB, number of drilling spindles: 1, min./max. drilling diameter: 4mm/30mm, max. drilling depth: 1000mm, table dimensions X/Y: approx. 850mm/750mm.

Pionowe centrum obróbcze CNC

Mazak AJV 60/120

Niemcy

1990

używany

na żądanie

INNO27196

Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible.

Frezarka CNC

Mazak FH 880

Niemcy

1997

używany

na żądanie

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

Wiertarka rzędowa

Elu S156

Niemcy

1976

używany

na żądanie

INNO14814

Number of drilling heads: 4.

Tokarka CNC

Monforts RNC 200 A

Niemcy

2000

używany

na żądanie

INNO27182

Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available.

Piec rurowy

Thermconcept ROHT 50/200/17

Niemcy

2018

używany

na żądanie

INNO27169

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

Piec rurowy

Thermconcept ROK 70/500/11

Niemcy

2023

używany

na żądanie

INNO27168

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.

Maszyna do wykrawania i gięcia

Bihler GRM-50

Niemcy

1979

używany

na żądanie

INNO24616

Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg.

Prasa do gięcia krawędzi CNC

Eht EHPS 20-35

Niemcy

1995

używany

na żądanie

INNO27107

Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.

Frezarka uniwersalna CNC

Mikron WF 51C/155

Niemcy

nieznany

używany

na żądanie

INNO27081

Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available.