Nożyce do stali profilowanej

Peddinghaus 214/680

Niemcy

nieznany

używany

na żądanie

INNO29512

Material strength range: 50kg-80kg/mm², cutting capacity round material/square material: 130mm/145mm, min. cutting capacity carrier profile: 250mm/75mm, max. cutting capacity carrier profile: 360mm/60mm. On-site inspection is possible.

więcej

Prasa ręczna

Kieserling KPR 140/630

Niemcy

1962

używany

na żądanie

INNO29511

A Kieserling double-column eccentric crank press is available. Pressing force: 140t, table dimensions X/Y: 630mm/710mm, opening diameter: 200mm, column width: 630mm, ram table distance: 435mm/560mm, stroke: 50mm-125mm, ejector stroke: 20mm, stroke rate: 50/min, ram adjustment: 70mm, ram dimensions X/Y: 500mm/425mm. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/3600mm, weight: approx. 11000kg. Including one roller feed unit. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Dmtg CKE6150Z

Niemcy

2008

używany

na żądanie

INNO29510

Turning diameter over bed/cross slide: 500mm/280mm, max. workpiece length: 1500mm, travel X/Z: 280mm/1430mm, spindle bore: 82mm, speed: 2200rpm, rapid traverse X/Z: 6m/10m/min, quill diameter: 75mm, quill stroke: 150mm, bed width: 400mm, chuck diameter: 250mm. Machine dimensions X/Y/Z: approx. 3350mm/1750mm/1650mm, weight: approx. 2700kg, control: Fanuc Series 0i Mate-TC. Documentation available. On-site inspection is possible.

więcej

Maszyna do cięcia laserowego CNC

Trumpf TruLaser 7025/TruFlow 3200/LoadMaster

Niemcy

2008

używany

na żądanie

INNO29509

A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible.

więcej

Frezarka CNC

Hermle UWF 900 E

Niemcy

1990

używany

na żądanie

INNO29508

Year of manufacture: approx. 1990, travel X/Y/Z: 600mm/400mm/420mm, speed: 4000rpm, tool holder: SK40, table-spindle distance: 127mm-567mm, spindle head swivel: +/-90°, table dimensions X/Y: 900mm/450mm, feed: 5m/min, rapid traverse X/Y/Z: 7m/7m/6m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2100mm, weight: approx. 3000kg, control: Heidenhain TNC 355. The controller of the motor spindle has problems. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Fat TUR 560 MN

Niemcy

nieznany

używany

na żądanie

INNO29507

Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible.

więcej

Tokarka

Romi S-40

Niemcy

nieznany

używany

na żądanie

INNO29503

Turning diameter over bed: 500mm, turning diameter over face slide: 250mm, center distance: 2000mm, spindle bore: 58mm, speed: 1400rpm. The feed of the machine is defective. On-site inspection is possible.

więcej

Frezarka CNC

Iselautomation Premium 4020

Niemcy

nieznany

używany

na żądanie

INNO29502

A CNC fine milling machine Iselautomation KG with defective spindle is available. Travel X/Y: 400mm/200mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1600mm, weight: approx. 500kg. On-site inspection is possible.

więcej

Wykrawarka laserowa CNC

Trumpf TruMatic 3000

Niemcy

2010

używany

na żądanie

INNO29489

A Trumpf CNC punching and laser combination machine is available. Punching force: 165kN, laser source: Trumpf TruCoax 2000, laser power: 2000W, working range X/Y: 2500mm/1250mm, max. sheet thickness: 4mm. Machine dimensions X/Y/Z: approx. 6500mm/6000mm/2250mm, weight: approx. 10000kg, operating hours: 53940h, laser hours: 12420h. Documentation available. On-site inspection is possible.

więcej

Szlifierki do wałków CNC

Gsn PF5 UM100

Niemcy

2013

używany

na żądanie

INNO29483

A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Deckel Maho DMC 70 H duoBlock

Niemcy

2005

używany

na żądanie

INNO29479

Travel X/Y/Z: 750mm/800mm/800mm, table dimensions X/Y: 500mm/500mm, max. table load: 800kg, tool holder: SK40, speed: 18000rpm, tool positions: 120, machine weight: approx. 17000kg, control: Siemens Sinumerik 840D, operating hours: approx. 85532h, spindle hours: approx. 44907h. Including a filter system with a 900l coolant tank, a chip conveyor and a Renishaw measuring probe. The machine spindle was replaced by Deckel Maho in 2022. Documentation available. On-site inspection is possible.

więcej

Szlifierka CNC

Junker Jucrank 3000/50

Niemcy

2001

używany

na żądanie

INNO29476

A defective Junker CNC crankshaft grinding machine is available. Workpiece diameter range: 35mm-70mm, max. workpiece length: 500mm, grinding wheel diameter: 350mm, bore: 127mm, pad width: 30mm, peripheral speed: 140m/s. Machine dimensions X/Y/Z: approx. 7200mm/3900mm/2700mm, weight: approx. 8000kg, VRF system weight: approx. 5700kg. Including Knoll cooling lubricant system with filter and sludge dryer. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Chiron FZ 15 S

Niemcy

2005

używany

na żądanie

INNO29475

A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Traub TNS 65D

Niemcy

1991

używany

na żądanie

INNO29474

A CNC lathe is available. Turning diameter over bed: 450mm, turning length: 630mm, spindle bore: 65mm, speed: 4000rpm, rapid traverse: 15m/min, power: 57kW, travel X/Z: 175mm/630mm, tool positions: 12+8+4, machine dimensions X/Y/Z: approx. 4000mm/2200mm/2200mm, weight: approx. 6500kg, control: Traub System TX-8-D, operating hours: 19465h. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Traub TNS 65D

Niemcy

1991

używany

na żądanie

INNO29473

A CNC lathe is available. Turning diameter over bed: 450mm, turning length: 630mm, spindle bore: 65mm, speed: 4000rpm, rapid traverse: 15m/min, power: 57kW, travel X/Z: 175mm/630mm, tool positions: 12+8+4, machine dimensions X/Y/Z: approx. 4000mm/2200mm/2200mm, weight: approx. 6500kg, control: Traub System TX-8-D. Documentation available. On-site inspection is possible.

więcej

Tokarka cykliczna CNC

Voest-alpine E 50/2

Niemcy

1992

używany

na żądanie

INNO29470

Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible.

więcej

Pionowe centrum obróbcze CNC

Hartford VCM-1000

Niemcy

nieznany

używany

na żądanie

INNO29469

Travel X/Y/Z: 1000mm/600mm/630mm, table dimensions X/Y: 1150mm/600mm, max. table load: 700kg, rapid traverse: 20m/min, speed: 10000rpm, tool positions: 24, machine dimensions X/Y/Z: approx. 2950mm/2650mm/2850mm, weight: approx. 5300kg, control: Mitsubishi Meldas. On-site inspection is possible.

więcej

Szlifierka oscylacyjna

Löwer SWG

Niemcy

2020

używany

na żądanie

INNO29465

A manual Loewer sanding machine with swivel option is available. Table dimensions X/Y: 800mm/1400mm, sanding power: 0.75kW, speed: 2000rpm, suction nozzle diameter: 120mm, machine dimensions X/Y/Z: approx. 1450mm/1100mm/1800mm, weight: approx. 430kg. Documentation available. An on-site inspection is possible.

więcej

Drukarka metalu 3D

Concept Laser M2-cusing

Niemcy

2007

używany

na żądanie

INNO29460

A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Benzinger DOLittle B3

Niemcy

2014

używany

na żądanie

INNO29455

A Benzinger CNC double-spindle precision lathe is available. Travel X1/Z1/Z2: 310mm/160mm/80mm, rapid traverse X/Z: 30m/min, feed X/Z: 4000N, max. tool length: 60mm, machine dimensions X/Y/Z: approx. 2600mm/1500mm/1850mm, weight: approx. 2600kg, control: Siemens Sinumerik 828D. Including bar loader IRCO MUK 7012-II and fire extinguishing system Kraft & Bauer FB 703, documentation available. On-site inspection is possible.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki