▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [741 - 760 of 1171]

Maszyna do czyszczenia części

Mafac Elba

Niemcy

2005

używany

na żądanie

INNO29348

Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi

Promecam 02 100 40 115

Niemcy

nieznany

używany

na żądanie

INNO29344

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

Nożyce do blachy

Haco HSLX 4008

Niemcy

1997

używany

na żądanie

INNO29343

A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible.

Linia do powlekania proszkowego

Meeh Jumbo-Coat

Niemcy

2008

używany

na żądanie

INNO29339

A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible.

Nożyce do blachy

Eht TSS 4-31

Niemcy

1987

używany

na żądanie

INNO29331

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

Zrywarka

Niehoff GE 160

Niemcy

1961

używany

na żądanie

INNO29327

A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Ipg/idam/paatz YLR-150/1500-QCW-MM

Niemcy

2006

używany

na żądanie

INNO29321

A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.

Pozostałe zapasy

Bbm/nimak/weiler/ksm/tox

Niemcy

1995

używany

na żądanie

INNO29297

Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.

Nitownica

Stanley Tucker T290 ERT 80

Niemcy

2016

używany

na żądanie

INNO29292

Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.

Ekstrakcja mgły emulsyjnej

Camfil Handte Apc EM-DS 1-0,75 NF

Niemcy

2014

używany

na żądanie

INNO29276

A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Amada APX 100 30

Niemcy

1995

używany

na żądanie

INNO29262

A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Traub TND 360

Niemcy

1986

używany

na żądanie

INNO29254

Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible.

Szlifierka CNC

Mikromat 3G

Niemcy

1990

używany

na żądanie

INNO29253

Workpiece diameter range: 2mm-320mm, max. grinding length: 500mm, center distance: 1000mm, max. workpiece weight: 150kg. On-site inspection is possible.

Centrum obróbcze CNC

Maho Mahomat SF 250

Niemcy

1990

używany

na żądanie

INNO29252

Travel X/Y/Z: 600mm/500mm/400mm, table dimensions X/Y: 900mm/600mm, spindle mount: SK40, speed: 6000rpm, tool positions: 24, feed: 6m/min, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 4000mm/4000mm/2700mm, weight: approx. 5000kg. On-site inspection is possible.

Centrum obróbcze CNC

Maho MH 700 S

Niemcy

1989

używany

na żądanie

INNO29251

Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible.

Portalowy system cięcia plazmowego CNC

Microstep MG 16500

Niemcy

2014

używany

na żądanie

INNO29247

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014.

Tokarka CNC

Okuma LB 15/LB 15 M/LB 15 W

Niemcy

nieznany

używany

na żądanie

INNO29246

Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible.

Centrum toczenia i frezowania CNC

Gildemeister GMX 400

Niemcy

2004

używany

na żądanie

INNO29245

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Kołowrotek

H. Schleicher H-3

Niemcy

1978

używany

na żądanie

INNO29218

Max. coil weight: 3t, max. strip width: 500mm, strip thickness: 0.4-5mm, connected load: 0.55kW. With control, straightener and hydraulic unit Rexroth, without documentation. On-site inspection is possible.

Pozostałe zapasy

Hurth/busch LFV 3/FSV 5

Niemcy

1970

używany

na żądanie

INNO29192

Two metalworking machines are available. 1) Carl Hurth LFV 3. 2) Busch Maschinenfabrik FSV 5, year of manufacture: 1965. On-site inspection is possible. Individual sale possible.