▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [721 - 740 of 1020]

Piła tarczowa

Eisele VMSII-033

Niemcy

1982

używany

na żądanie

INNO27859

Saw blade diameter: 275mm, power: 1.9kW, speed: 80rpm, cutting range (flat): 140mm/70mm, cutting range (miter): 100mm/70mm, max. pipe cutting capacity: 3 inches, solid material cutting capacity: 80mm/60mm, square material cutting capacity: 50mm/50mm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1500mm, weight: approx. 300kg. On-site inspection is possible.

Frezarka narzędziowa

Ipte FUS-32

Niemcy

nieznany

używany

na żądanie

INNO27858

Travel X/Y/Z: 560mm/320mm/400mm, speed: 3600rpm, tool holder: SK40, power: 3kW, table dimensions X/Y: 450mm/950mm, weight: approx. 1650kg. Including various accessories. On-site inspection is possible.

Lakiernia

Rippert/maxon/weishaupt

Niemcy

2011

używany

na żądanie

INNO27855

A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.

Pionowe centrum obróbcze CNC

Deckel Maho DMC 100 V

Niemcy

1991

używany

na żądanie

INNO27851

Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. The machine has no controls anymore. Documentation available. On-site inspection is possible.

Szlifierka do otworów

Jung C8

Niemcy

1969

używany

na żądanie

INNO27838

Bore: 50mm, grinding depth: 80mm, spindle axis-table center distance: 145mm, grinding wheel holder: 540mm, taper: Morse 4, workpiece spindle bore: 28mm, workpiece spindle swivel: 10°/30°, grinding spindle swivel: 130mm, grinding spindle transverse movement: 30mm, table longitudinal movement: 4mm/80mm, cooling pump capacity: 140l/min. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1400mm, weight: approx. 1600kg. Including accessories and calibration measuring device. The machine was overhauled in 2002. Documentation available. On-site inspection is possible.

Prasa hydrauliczna

Lauffer RMT 100

Niemcy

2002

używany

na żądanie

INNO27825

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

Prasa do gięcia krawędzi CNC

Ermaksan AP 4100x120

Niemcy

1996

używany

na żądanie

INNO27821

Pressing force: 1200kN, working width: 4100mm, stand distance: 3550mm, table width: 215mm, throat depth: 400mm, stroke: 800mm, working speed: 80mm/s, power: 11kW, weight: approx. 12000kg. Dokumentation vorhanden. An on-site inspection is possible.

Frezarka CNC

Intos FNG50 CNC E

Niemcy

2005

używany

na żądanie

INNO27797

Travel X/Y/Z: 700mm/500mm/500mm, feed X/Y/Z: 5000mm/5000mm/2500mm/min, feed force X/Y/Z: 20kN/20kN/30kN. Spindle power: 7kW, speed: 3150rpm, spindle torque: 250Nm, spindle mount: ISO40. Vertical table: dimensions X/Z: 500mm/320mm, flute width: 14H8, axis distance: 50mm, number of flutes: 5. Angled table: Dimensions X/Y: 900mm/500mm, flute width: 14H8, axis distance: 50mm, number of slots: 10, machine dimensions X/Y/Z: approx. 1820mm/2050mm/2175mm, weight: approx. 2500kg, control: Heidenhain TNC 310, probe included. Documentation available. On-site inspection is possible.

Frezarka uniwersalna CNC

Deckel Maho MH 600W

Niemcy

1997

używany

na żądanie

INNO27796

Tool length: 250mm, max. tool weight: 6kg, control: Heidenhain CNC 234, connected load: 40kVA, machine dimensions (LxWxH): 4700mm/4100mm/2300mm, weight: approx. 2.8t, operating hours: 43,408h. The guide rail of the front door is broken. Documentation available. An on-site inspection is possible.

Frezarka uniwersalna CNC

Maho MH 1600 S

Niemcy

1991

używany

na żądanie

INNO27795

X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm, tool holder: ISO 50, speed: 20-4000/min, feed rate: 1-4000mm/min, max. rapid traverse: 10m/min, number of tool positions: 36, max. tool diameter: 160/210mm, max. tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions: 5080mm/36xWxH Tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions (LxWxH): 5080mm/3650mm/2005mm, weight: approx. 16t, documentation available, complete retrofit 2015.

Frezarka uniwersalna CNC

Reckermann Delta1300 K

Niemcy

2008

używany

na żądanie

INNO27790

Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible.

Piec obrotowy

Tanabe

Niemcy

2023

używany

na żądanie

INNO27787

An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for local operation, 3x HMIs, several control panels and control cabinets. Including various accessories such as spare parts, transportation aids and associated smaller devices. The entire system is brand new and is still in its original packaging. The pictures were taken at the place of manufacture. Documentation available. On-site inspection is possible.

Frezarka CNC

Dmg Mori CMX 1100 V

Niemcy

2019

używany

na żądanie

INNO27777

Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible.

Szlifierka do zewnętrz wałków CNC

Studer S31 CNC

Niemcy

1999

używany

na żądanie

INNO27773

Center height: 175mm, grinding length: 650mm, B-axis: -15°/195°, workpiece speed: 1750rpm, grinding wheels T1/T2: 500mm/400mm, bore: 203mm, max. workpiece weight: 80kg, workhead: MK4, tailstock: MK3. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/2100mm, weight: approx. 4000kg, operating hours: 56300h, control: GE Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.

Szlifierki do wałków CNC

Bahmüller ASP 650 CNC

Niemcy

1996

używany

na żądanie

INNO27771

Sanding length: 650mm, max. sanding diameter: 508mm, center height: 125mm, workhead speed: 1500rpm, max. workpiece weight: 30kg, workpiece swivel range: 30°-90°, tailstock: MK3. Grinding wheel diameter: 508mm, grinding wheel width: 40mm, bore: 203mm, max. internal grinding diameter: 150mm. Machine dimensions X/Y/Z: approx. 4300mm/3100mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik 820G. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.

Ciągarnia drutu

Koch KHZ 6300

Niemcy

1992

używany

na żądanie

INNO27758

A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of manufacture: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Documentation available. On-site inspection is possible.

Wyciskanie na zimno

Dr. Fritsch KP 35

Niemcy

2000

używany

na żądanie

INNO27741

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Shw UFZ 6L

Niemcy

1990

używany

na żądanie

INNO27719

A CNC universal milling and drilling center SHW is available. Travel X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44000kg. Documentation available. On-site inspection is possible.

Frezarka

Dpm

Niemcy

nieznany

używany

na żądanie

INNO27706

An NC bed milling machine DPM (Digital Precision Machine) with defective control is available. Travel X/Y/Z: approx. 800mm/430mm/600mm, table dimensions X/Y: 1270mm/255mm, spindle mount: R8/CAT40, speed: 5000rpm, spindle power: 2.2kW, max. table load: 340kg, rapid traverse: 2.54m/min. Dimensions X/Y/Z: approx. 2000mm/2600mm/2300mm, weight: approx. 2500kg. On-site inspection is possible.

Szlifierka powierzchniowa

Wmw SFW200x600/2

Niemcy

1988

używany

na żądanie

INNO27692

Sanding width: 200mm, sanding length: 600mm, adjustment path X/Y: 690mm/230mm, clamping table spindle center distance: 500mm, sanding wheel diameter: 200mm, sanding wheel width: 20mm, bore: 51mm, table dimensions X/Y: 200mm/600mm, max. table load: 110kp, machine dimensions X/Y/Z: approx. 3000mm/1600mm/2100mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.