▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [701 - 720 of 970]

Centrum nożycowe

Pivatic PivaCut

Niemcy

nieznany

używany

na żądanie

INNO26491

Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.

Zmywarka do naczyń

Hobart UCX

Niemcy

nieznany

używany

na żądanie

INNO26481

Output: 225 crates/h, with documentation, an inspection is possible.

Maszyna do cięcia plazmowego CNC

Haco PROXIMA 6025

Niemcy

2010

używany

na żądanie

INNO26474

Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible.

Szlifierka do kopiowania

Petewe Gmbh PFS 30-CNC

Niemcy

1983

używany

na żądanie

INNO26465

Was used to rework profile rollers for a hot rolling mill, was regularly serviced, with accessories, without spare parts, on-site inspection is possible, no videos available.

System cięcia strumieniem wody CNC

Expert cutExpert variojet

Niemcy

nieznany

używany

na żądanie

INNO26460

Max. Plate dimensions: 2400x2100mm, table dimensions: 4100x3600x1450mm, water jet nozzles: 0.12/0.15/0.17/0.20/0.25mm, with documentation, 3D cutting head, drives, software, tools, spare parts package, and high pressure pump UHDE HPS 4022, multifunctional CAM cutting system with high precision, without abrasives, 3D 5-axis cutting head for flat cutting of different materials up to 45° bevel, with cutting nozzle make Allfi III/V, electrical height adjustment of the nozzle up to 200mm, for different material heights, dynamic servo drives for 90m/min, acceleration up to 70 m/s², machine frame in truss construction made of aluminum, cutting bridge, stainless steel water collection tray with water drain, stainless steel honeycomb elements as cutting table support, PC-based NC control Expert-PC and TFT monitor, cutting table, housing and hold-down device, on-site inspection is possible.

Maszyna do erozji iskrowej

Heun MD-435

Niemcy

2017

używany

na żądanie

INNO26434

X-travel: 400mm, y-travel: 350mm, z-travel: 250mm, W-travel: 300mm, max. load: 400kg, length: 1090mm, width: 1750mm, height: 2075mm, weight: 1.2t, with documentation.

Szlifierka ślimakowa

Klingelnberg HNC 35 VR

Niemcy

1995

używany

na żądanie

INNO26400

Max. workpiece diameter: 10-350mm, max. grinding length: 600mm, clamping length: 1055mm, swivel angle: +/-60°, with oil mist filtration, an inspection is possible.

Szlifierka ślimakowa

Klingelnberg HNC 35

Niemcy

1987

używany

na żądanie

INNO26401

Workpiece diameter: 10-350mm, max. grinding length: 660mm, clamping length: 1055mm, max. module: 25mm, swivel angle: +/-60°, grinding wheel dimensions: 300-500x100mm, with Faudi cooling lubricant belt filter and Elbaron oil mist separator. No longer fit for operation and can only be used as a basis for a complete overhaul.

Maszyna do cięcia kół zębatych stożkowych

Klingelnberg SNC30

Niemcy

1987

używany

na żądanie

INNO26399

Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.

Tokarka pionowa

Famar S.r.l. ERGO 260

Niemcy

2007

używany

na żądanie

INNO26384

A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible.

Tokarka pionowa

Famar S.r.l. ERGO 200

Niemcy

2006

używany

na żądanie

INNO26383

A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible.

Giętarka do rur

Tracto-technik TUBOFORM

Niemcy

nieznany

używany

na żądanie

INNO26375

There are five identical machines available, an inspection is possible.

Giętarka do rur

Tracto-technik Gmbh TUBOTRON TN 30 511NR

Niemcy

2005

używany

na żądanie

INNO26374

Max. bending diameter: 30mm, an inspection is possible.

Centrum obróbcze CNC

Sw Gmbh BAW06-22

Niemcy

2014

używany

na żądanie

INNO26369

X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.

Centrum obróbcze CNC

Sw Gmbh BAW06-22

Niemcy

2014

używany

na żądanie

INNO26368

X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.

Centrum obróbcze CNC

Sw Gmbh BAW06-22

Niemcy

2015

używany

na żądanie

INNO26367

X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.

Centrum obróbcze CNC

Sw Gmbh BAW06-22

Niemcy

2015

używany

na żądanie

INNO26366

X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.

Centrum obróbcze CNC

Sw Gmbh BAW06-22

Niemcy

2020

używany

na żądanie

INNO26365

X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.

Tokarka

Wagner DCS 160x900

Niemcy

nieznany

używany

na żądanie

INNO26323

Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible.

System spawania łukiem krytym

Esab

Niemcy

1990

używany

na żądanie

INNO26303

With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible.