▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [681 - 700 of 996]

Procesor plazmy atmosferycznej

Diener PlasmaBeam Standard

Niemcy

2020

używany

na żądanie

INNO27408

Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible.

Wytaczarka pozioma

Tos Varnsdorf W9A

Niemcy

1981

używany

na żądanie

INNO27344

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

Dwuwrzecionowe centrum obróbcze CNC

Stama MC 536

Niemcy

2009

używany

na żądanie

INNO27333

Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.

Centrum obróbcze CNC

Axa VSC 1

Niemcy

1988

używany

na żądanie

INNO27313

Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.

Frezarka uniwersalna

Deckel FP4MA

Niemcy

1990

używany

na żądanie

INNO27298

Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, speed: 2500rpm, spindle mount: SK40/M16, feed: 630mm/min, rapid traverse: 1300mm/min. Dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1500kg, control: Grundig Contour 2, documentation available. On-site inspection is possible.

Prasa dziurkująca

Edel Stanzprofi 400

Niemcy

nieznany

używany

na żądanie

INNO27294

Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.

Tokarka i frezarka CNC

Kekeisen VFB 2000

Niemcy

2012

używany

na żądanie

INNO27282

Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible.

Prasa

Wmw KD2320

Niemcy

1971

używany

na żądanie

INNO27269

Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.

Centrum obróbcze CNC

Axa DBZ 2

Niemcy

2012

używany

na żądanie

INNO27230

Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available.

Frezarka

Steinel BZ20

Niemcy

1982

używany

na żądanie

INNO27209

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

Tokarka cykliczna CNC

Wagner WDE 360

Niemcy

2014

używany

na żądanie

INNO27207

Travel X/Y: 230mm/870mm, speed: 3000rpm, max. spindle bore 52mm, max. turning diameter over bed/face slide: 360mm/180mm, max. workpiece length: 870mm, bed width: 1000mm, max. tailstock stroke: 130mm, max. quill diameter: 63mm. Dimensions X/Y/Z: approx. 2500mm/1700mm/2000mm, weight: approx. 1600kg. Documentation available.

Wiertarka do głębokich otworów

Tbt T30-1000 KTN/NC

Niemcy

nieznany

używany

na żądanie

INNO27205

Travel X/Y/Z: 700mm/300mm/1000mm, rapid traverse X/Y/Z: 4000mm/4000mm/2000mm /min, drilling method: ELB, number of drilling spindles: 1, min./max. drilling diameter: 4mm/30mm, max. drilling depth: 1000mm, table dimensions X/Y: approx. 850mm/750mm.

Wiertarka do głębokich otworów

Tbt T10-500

Niemcy

nieznany

używany

na żądanie

INNO27204

Drilling diameter: 2mm-10mm, max. drilling depth: 500mm, drilling method: ELB, speed: 8000rpm. Dimensions X/Y/Z: approx. 2300mm/1300mm/1600mm, weight: approx. 2000kg. Including cooling with automatic filter and magnetic chip conveyor.

Tokarka CNC

Ergomat TD 26

Niemcy

2005

używany

na żądanie

INNO27200

Two identical Ergomat lathes are available. Spindle capacity: max. tube material: 26mm, max. solid material: 26, max. hexagonal material: 22mm, max. square material: 18mm. Distance between collet and tailstock: 285mm, max. turning length: 70mm, production output per hour min./max.: 22/1882, main spindle power: 2.2kW, speed: 4750rpm, vertical/horizontal slide travel: 35mm/35mm. Dimensions X/Y/Z: approx. 1500mm/1400mm/600mm, weight: approx. 850kg. Documentation available. On-site inspection is possible.

Pionowe centrum obróbcze CNC

Mazak AJV 60/120

Niemcy

1990

używany

na żądanie

INNO27196

Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible.

Frezarka CNC

Mazak FH 880

Niemcy

1997

używany

na żądanie

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

Wiertarka rzędowa

Elu S156

Niemcy

1976

używany

na żądanie

INNO14814

Number of drilling heads: 4.

Tokarka CNC

Monforts RNC 200 A

Niemcy

2000

używany

na żądanie

INNO27182

Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available.

Ciągarnia drutu

Koch KHZ 5000

Niemcy

1993

używany

na żądanie

INNO27180

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of construction: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Including hydraulic unit G13 AK. Documentation available.

Linia do produkcji cewek

Schmitz/psm

Niemcy

2007

używany

na żądanie

INNO27178

A Schmitz/PSM slitting line for sheet metal processing is available. Coil weight: 5t/6t, strip width: 650mm, strip thickness (stainless steel): 0,4mm-1,5mm, coil inner diameter: 400mm/508mm/610mm, coil outer diameter: 1740mm/2000mm, speed: 100m/min, working direction: right(left) / DX - SX. Components: Decoiler with paper winder, deflection rollers, foil device on both sides, strip guiding, strip cutter, scrap winder, recoiler, coil take-up cross, hydraulic units as well as various tools and sanding belts. On-site inspection is possible.