▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Obróbka metali i obrabiarki

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [661 - 680 of 1235]

Tokarka centralna

Martin D70

Niemcy

1968

używany

na żądanie

INNO30586

Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.

Frezarka i wiertarka

Deckel Maho MH 700

Niemcy

1972

używany

na żądanie

INNO30584

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Stół obrotowy

Everwand & Fell/vermotec Vulkan/Vartant

Niemcy

2000

używany

na żądanie

INNO30558

Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible.

System czyszczący

Mafac Java

Niemcy

2011

używany

na żądanie

INNO30557

A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible.

Tokarka CNC

Spinner TC 65-MC

Niemcy

2005

używany

na żądanie

INNO30547

A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement.

Centrum obróbcze CNC

Dmg Mori DMC 835 V

Niemcy

nieznany

używany

na żądanie

INNO30541

A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.

Centrum do cięcia strumieniem wody

Soitaab Thesis 2040

Niemcy

2014

używany

na żądanie

INNO30528

A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.

Piła do listew przyszybowych

Striffler 2733

Niemcy

nieznany

używany

na żądanie

INNO30527

A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.

Centrum obróbcze CNC

Mazak VTC-800/30SR

Niemcy

2015

używany

na żądanie

INNO30524

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

Kształtowarka

Hahndorf REWK 86/14

Niemcy

2007

używany

na żądanie

INNO30522

A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible.

Źródło lasera

Ipg Laser YLS-3000-CT

Niemcy

2013

używany

na żądanie

INNO30517

An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible.

Maszyna do erodowania drutu

Mitsubishi DWC 200H

Niemcy

1987

używany

na żądanie

INNO30512

A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.

Nożyce do blachy

Schneider

Niemcy

nieznany

używany

na żądanie

INNO30472

A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible.

Podwójna piła ukosowa

Emmegi Single 2 500 TU6 P1250KG

Niemcy

1994

używany

na żądanie

INNO30464

A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

System czyszczący

Bvl Oberflächentechnik Rotocleaner 750

Niemcy

1996

używany

na żądanie

INNO30462

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

Wiertarka kolumnowa

Gillardon

Niemcy

1984

używany

na żądanie

INNO30461

Offered is a column drilling machine year of construction 1984, drive: VEM KPER 80 K 4, speed ranges: 3 step belt drive, spindle speed: approx. 1380rpm, quill stroke: approx. 120mm, MT2. Inspection is possible by appointment.

Linia do obróbki kół zębatych

Emag VLC100/VLC200/Trackmotion

Niemcy

2015

używany

na żądanie

INNO30456

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible with power connection.

Tokarko-szlifierka cnc

Emag VSC 250 DS

Niemcy

2015

używany

na żądanie

INNO30455

A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power.

Piła ukośnica

Kaltenbach HMB 360

Niemcy

1996

używany

na żądanie

INNO30448

A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible.

Wiertarka promieniowa

Donau Werkzeugmaschinen DR23

Niemcy

nieznany

używany

na żądanie

INNO30444

Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.