Tokarka skośna

Traub TND 200

Niemcy

nieznany

używany

na żądanie

INNO30704

A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.

więcej

Frezarka

Vernier DA500

Niemcy

1975

używany

na żądanie

INNO30703

An old universal milling machine Vernier is available. Travel X/Y/Z: 1300mm/600mm/600mm, table dimensions X/Y: 1600mm/500mm, spindle interface: SA50, speed: 1600rpm, power: 15kW. An on site inspection is possible.

więcej

Frezarka

Tos FNGJ 40

Niemcy

1999

używany

na żądanie

INNO30698

Travel X/Y/Z: 600mm/400mm/400mm, spindle taper: ISO40, quill stroke: 100mm, speed: 3150rpm, machine dimensions X/Y/Z: approx. 2000mm/1800mm/1900mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

więcej

Frezarka

Tos FNGJ 32

Niemcy

1992

używany

na żądanie

INNO30697

Travel X/Y/Z: 600mm/400mm/400mm, quill stroke: 1000mm, spindle taper: ISO40, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Gildemeister NEF CT 60

Niemcy

1982

używany

na żądanie

INNO30696

A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible.

więcej

Maszyna do cięcia laserowego

Rofin DC 035/DC 035 2B

Niemcy

nieznany

używany

na żądanie

INNO30695

Two nearly identical Rofin laser machines are available. Wavelength: 10600nm, operating power: 4kW, max. pulse power: 8kW, pulse duration: 0.5ms, laser type: CO2 slab laser, cooling: diffusion cooling, max. pulse frequency: 5000Hz, polarization: linear, excitation: RF, gas type: premix. Machine dimensions X/Y/Z: approx. 2300mm/1000mm/1900mm, weight: approx. 1700kg. Documentation available. On-site inspection is possible.

więcej

System automatyki magazynu okrągłego

Dmg Automation PH150-7

Niemcy

2011

używany

na żądanie

INNO30689

An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible.

więcej

Frezarka kopiująca

Rotox KF 457

Niemcy

1991

używany

na żądanie

INNO30685

A Rotox lock case milling machine with multi-spindle milling unit is available. Travel vertical/horizontal: 265mm/125mm, max. profile width: 125mm, max. profile height: 50mm, speed: 9000rpm, machine dimensions X/Y/Z: approx. 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

więcej

Frezarka uniwersalna CNC

Deckel Maho DMU 50 M

Niemcy

1997

używany

na żądanie

INNO30679

A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible.

więcej

Automatyczna tokarka rewolwerowa

Wmw DRT 36

Niemcy

1957

używany

na żądanie

INNO30674

An untested conventional turret lathe WMW with extensive accessories is available. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/1200mm, weight: approx. 2000kg. An on-site inspection is possible.

więcej

Znakowarka laserowa

Ilz LBS 01

Niemcy

2000

używany

na żądanie

INNO30673

An untested Ilmenauer laser marking machine including a TBH extraction unit is available. 1) Laser marking machine Ilmenauer Laserzentrum GmbH ILZ LBS 01, year of manufacture: 2000, laser class: 1. 2) TBH LN 200 extraction unit, year of manufacture: 2000, air volume flow rate: 250m³/h, motor power: 1.2kW, machine dimensions X/Y/Z: approx. 1000mm/400mm/400mm, weight: approx. 50kg. On-site inspection is possible.

więcej

Automatyczna giętarka do drutu CNC

V&c VC-REC-08-Advanced

Niemcy

2018

używany

na żądanie

INNO30672

A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible.

więcej

Tokarka uniwersalna

Bulmak 400M

Niemcy

nieznany

używany

na żądanie

INNO30670

A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.

więcej

Walcownia

Omcca HSI.L H3 2050.8.6

Niemcy

1998

używany

na żądanie

INNO30669

A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible.

więcej

Piła taśmowa CNC

Kasto KASTOfunctional A

Niemcy

2003

używany

na żądanie

INNO30666

A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible.

więcej

Pionowe centrum obróbcze CNC

Chiron FZ 22 high-speed

Niemcy

nieznany

używany

na żądanie

INNO30665

Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible.

więcej

Pionowe centrum obróbcze CNC

Bridgeport Interact 412

Niemcy

nieznany

używany

na żądanie

INNO30664

Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible.

więcej

Frezarka CNC

Deckel FP 50 UC

Niemcy

nieznany

używany

na żądanie

INNO30663

A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible.

więcej

Hydrauliczne nożyce gilotynowe

Baykal MGH 3100x10

Niemcy

2005

używany

na żądanie

INNO30643

A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible.

więcej

Piła tarczowa na zimno

Wagner WHC 630 A-NC

Niemcy

1991

używany

na żądanie

INNO30639

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki