▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [561 - 580 of 976]

Maszyna do gratowania szczotek

Lissmac SBM-B 1500

Niemcy

2007

używany

na żądanie

INNO27631

Throughput: 300kg/m², max. working width: 1500mm, max. workpiece thickness: 20mm, min. workpiece dimensions X/Y: 50mm/50mm, number of brushes: 4, brush heads: 2, machine dimensions X/Y/Z: approx. 2800mm/1500mm/1500mm, weight: approx. 1800kg, operating hours: 51h. Documentation available. On-site inspection is possible.

Instalacja chłodzenia

Ruez

Niemcy

2022

używany

na żądanie

INNO27623

A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible.

Tokarka automatyczna wielowrzecionowa

Gildemeister AS 25

Niemcy

1991

używany

na żądanie

INNO27597

Two identical Gildemeister six-spindle bar turning machines with the corresponding bar loading magazines are available. Number of spindles: 6, max. workpiece diameter: 25mm, speed: 8000 rpm, spindle bore: 32mm, max. bar diameter: 32mm, max. bar length: 3300mm, machine dimensions X/Y/Z: approx. 8000mm/2000mm/3000mm, weight: approx. 5000kg. Including bar loading magazines.

Piec hartowniczy

Caldatrac CDF 60/90/60

Niemcy

2001

używany

na żądanie

INNO27580

Internal dimensions X/Y/Z: 600mm/900mm/600mm, nominal temperature: 350°C, heating capacity: 13.5kW, usable space: 0.32m³, total steam space: 0.57m³, min. exhaust air volume flow: 120m³/h.

Odlewnia ciśnieniowa

Oskar Frech DAK 200

Niemcy

1989

używany

na żądanie

INNO27574

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

Tokarka

Boehringer M 670

Niemcy

1964

używany

na żądanie

INNO27562

Center height: 350mm, center width: 3000mm, spindle bore: 90mm.

Pozioma piła taśmowa

Bauer HS 300 A

Niemcy

1990

używany

na żądanie

INNO27555

Saw blade dimensions: 3660mm/27mm/0.9mm, cutting range at 90° round material/flat material: 300mm/385mm x 220mm, saw blade speed: 20m-70m/min, saw blade roller diameter: 450mm, power: 1.5kW, machine dimensions X/Y/Z: approx. 220mm/1500mm/1200mm. On-site inspection is possible.

System czyszczenia ultradźwiękowego

Kln W1/90=40=45

Niemcy

2008

używany

na żądanie

INNO27554

Rated power: 2000W, frequency: 30kHz, heating power: 11.2kW, cleaning medium: aqueous, filling capacity: approx. 290l, transport mechanism: Lift, load capacity per lifting arm: 100kg. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/2500mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

Piła taśmowa

Knuth

Niemcy

2010

używany

na żądanie

INNO27553

A Knuth band saw is available. Power: 0.75kW, voltage: 400V, frequency: 50Hz. On-site inspection is possible.

Tokarka pionowa CNC

Gildemeister CTV 250

Niemcy

2002

używany

na żądanie

INNO27550

Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Harrison Alpha 400 Plus

Niemcy

1997

używany

na żądanie

INNO27527

Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible.

Symultaniczne centrum tokarskie CNC

Spinner TTS65-Triplex

Niemcy

2019

używany

na żądanie

INNO27526

A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible.

Frezarka kopiująca

Mühlacker

Niemcy

1982

używany

na żądanie

INNO27500

Travel Z: 120mm, clamping range: 190mm/160mm, speed: 12000rpm, compressed air connection: 6bar.

Prasa hydrauliczna

Mae S10 RK

Niemcy

nieznany

używany

na żądanie

INNO27487

Pressing force: 10t, oil filling: 300l, max. pressure: 20bar, press type: C-column press, machine dimensions X/Y/Z: approx. 1250mm/1200mm/3000mm. On-site inspection is possible.

Frezarka narzędziowa CNC

Deckel Maho MH 1000 C

Niemcy

1986

używany

na żądanie

INNO27478

Travel: 1000mm/560mm/1100mm, tool holder: ISO 50, quill stroke: 125mm, speed: 2000rpm, feed: 3000mm/min, rapid traverse: 6m/min, max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, weight: approx. 7100kg, CNC 432 control, operating hours: 70771h. Documentation available.

Tokarka NC

Index GU800 NC

Niemcy

nieznany

używany

na żądanie

INNO27477

Turning diameter over bed/bed slide: 600mm/320mm, turning length: 820mm. Including parts catcher, steady rest and tailstock. Expected to be available from the beginning of 2026.

Tokarka NC

Index GFG65/350 NC

Niemcy

1976

używany

na żądanie

INNO27476

Max. turning diameter: 500mm, max. turning diameter over bed/bed slide: 600mm/315mm, speed: 4000rpm, max. slide travel: 500mm, rapid traverse: approx. 10m/min. Tool slots: 2x8, tool holder: VDI 3425, tool size: 20, max. bar diameter: 65mm, max. thread pitch: 2000mm. Documentation available. The machine has a damaged gearbox.

Centrum obróbcze CNC

Deckel Maho FP4-60

Niemcy

nieznany

używany

na żądanie

INNO27471

Number of axes: 4, travel X/Y/Z: 600mm/500mm/450mm, speed: 5000 rpm, tool holder: SK40, tool slots: 20, control: Dialog 11.

Frezarka narzędziowa CNC

Klopp-korradi UW5

Niemcy

1991

używany

na żądanie

INNO27467

A defective CNC universal tool milling and drilling machine Klopp-Korradi is available. Travel X/Y/Z: 1000mm/600mm/500mm, quill stroke: 63mm, spindle center-to-clamping surface distance min./max.: 60mm/560mm, max. workpiece weight: 630kg. Table dimensions X/Y: 1300mm/700mm, groove width: 18mm, groove distance: 90mm, tool holder: SK40, spindle diameter: 60mm, max. spindle torque: 630Nm, speed: 4000rpm. Control system: Heidenhain TNC 360, power supply unit is defective. Documentation available. On-site inspection is possible.

System cięcia laserem CO2

Prima Power Platino 1530/CP 3000

Niemcy

2011

używany

na żądanie

INNO27428

A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025.