▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [521 - 540 of 1052]

Obrotowa maszyna transferowa

Pfiffner Hydromat HW25

Niemcy

1999

używany

na żądanie

INNO29427

There are 4 almost identical Pfiffner CNC rotary transfer machines available. Years of construction: approx. 1999, control: Siemens S5/Siemens HME, stations: 12, process: sawing/feed/turning, operating hours: approx. 8500 hours: Sawing/feed/turning, operating hours: approx. 85383. Including loader, switch cabinet, chip conveyor, cooling lubricant system and a total of approx. 35 processing units. Documentation available. On-site inspection is possible. The machines are dismantled and stored, but it is possible to see similar machines in operation. One machine is incomplete and suitable as a spare parts carrier.

Szlifierki bezkłowe do wałków

Herminghausen SR 3

Niemcy

1994

używany

na żądanie

INNO29408

Workpiece diameter min./max.: 1mm/100mm, max. grinding length through-feed grinding/penetration grinding: 300mm/180mm, grinding wheel dimensions: 400mm/180mm/203mm, wheel wear grinding wheel/control wheel: 100mm/80mm, speed: 600rpm. Documentation available. On-site inspection is possible.

Tokarka centralna

Pinacho L-1/180

Niemcy

1990

używany

na żądanie

INNO29388

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

Magazyn do podajnika barów

Breuning Irco ILS RBK 10012

Niemcy

2005

używany

na żądanie

INNO29385

Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.

Piła tarczowa do metalu

Kaltenbach/adige SC 425

Niemcy

nieznany

używany

na żądanie

INNO29383

A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.

Laserowa maszyna do cięcia CO2

Sei S.p.a. PL 121 DieCut

Niemcy

1999

używany

na żądanie

INNO29363

Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.

Frezarka uniwersalna CNC

Deckel FP 5 CCT

Niemcy

1990

używany

na żądanie

INNO29359

Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible.

Tokarka

Dmt KD 400 TWIN

Niemcy

2018

używany

na żądanie

INNO29358

A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.

Maszyna do walcowania i foliowania

Schüco Isomat 4

Niemcy

1994

używany

na żądanie

INNO29356

A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.

Pionowe centrum obróbcze CNC

Röders RFM 600

Niemcy

2000

używany

na żądanie

INNO29354

A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible.

Tokarka pionowa CNC

Emag VL 5i

Niemcy

2011

używany

na żądanie

INNO29352

An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Junker EJ 11

Niemcy

2009

używany

na żądanie

INNO29350

A Junker CNC cylindrical grinding machine overhauled in 2019 is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, orbital diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions X/Y/Z: approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control: Siemens Sinumerik. Including BKW chiller, Knoll VL 1000/4000 cooling lubricant system with 6500l container and Hyfra industrial recooler. Documentation available. On-site inspection is possible.

Maszyna do czyszczenia części

Mafac Elba

Niemcy

2005

używany

na żądanie

INNO29348

Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi

Promecam 02 100 40 115

Niemcy

nieznany

używany

na żądanie

INNO29344

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

Nożyce do blachy

Haco HSLX 4008

Niemcy

1997

używany

na żądanie

INNO29343

A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible.

System spawania

Förster Geländer

Niemcy

2020

używany

na żądanie

INNO29341

A railing welding device (railing welding jig) Förster is available. Component weight: 300kg, turning radius: 360°, axle height: 1000mm, max. incline: 60°, railing height: 600mm-1200mm, max. profile dimensions X/Y: 80mm/40mm, max. profile diameter: 80mm, machine dimensions X/Y: 5000mm/1200mm. Documentation available. On-site inspection is possible.

Linia do powlekania proszkowego

Meeh Jumbo-Coat

Niemcy

2008

używany

na żądanie

INNO29339

A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible.

Nożyce do blachy

Eht TSS 4-31

Niemcy

1987

używany

na żądanie

INNO29331

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

Zrywarka

Niehoff GE 160

Niemcy

1961

używany

na żądanie

INNO29327

A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Ipg/idam/paatz YLR-150/1500-QCW-MM

Niemcy

2006

używany

na żądanie

INNO29321

A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.