▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [501 - 520 of 984]

Tokarka karuzelowa CNC

Froriep KE-Super

Niemcy

1955

używany

na żądanie

INNO28182

A Froriep horizontal vertical lathe that was completely overhauled in 2009 is available. Faceplate diameter: 1250mm, turning height: 1100mm, circulation diameter over bed: 1400mm, power: 38kW, container volume: 1000l, control: Siemens S7. The machine has undergone extensive mechanical and electrical overhauls, including a new lubrication and cooling system and a new paint job. Documentation available. On-site inspection is possible.

Wiertarka promieniowa

Mas VO 32

Niemcy

1992

używany

na żądanie

INNO28172

Arm length: 1000mm, max. drilling diameter steel/cast iron: 32mm/40mm, spindle stroke: 250mm, spindle holder: MK4, max. tapping capacity: M20, spindle table distance min./max.: 270mm/1040mm, table dimensions X/Y/Z: 1150mm/800mm, speed: 4500rpm. Machine dimensions X/Y/Z: approx. 1700mm/1100mm/2600mm, weight: approx. 2000kg. The emergency stop switch of the machine is defective. Documentation available. On-site inspection is possible.

Prasa pneumatyczna

Mäder XL-DA 5600-80-300

Niemcy

2018

używany

na żądanie

INNO28166

A Mäder direct-acting compressed air press is available. Pressing force at 6bar: 56kN, max. stroke length: 80mm, compressed air input min./max.: 3.2bar-6bar, max. tool dimensions X/Y: 310mm/220mm, max. tool weight: 14kg, total stopping time: 0.1s. Projection of press head/press frame: 150mm/300mm, working height: 195mm-290mm, table dimensions X/Y: 190mm/190mm, operating hours: 59h. Pressure cell included. Documentation available. On-site inspection is possible.

Maszyna do cięcia płomieniowego CNC

Messer Cutting MultiTherm Eco 3600

Niemcy

2021

używany

na żądanie

INNO28160

Track width: 3600mm, table dimensions: 6200x2300/ 3200x2500mm, max. workpiece thickness: 150mm, length: 10,700mm, width: 5070mm, height: 1980mm. With four oxyfuel torches, bevel cutting, segment-by-segment extraction of the areas where firing takes place, automatic gas setting (OmniFlow) for cutting oxygen (max. 15bar), heating oxygen (max. 10bar), fuel gas (max. 2bar), ALFA MS 4452/250 machine cutting torch, OmniWin2021 software. Available from February 2025, an inspection on site is possible.

Zakład obróbki cieplnej

Paddeltherm

Niemcy

2003

używany

na żądanie

INNO28157

Length: 21,000mm, width: 5000mm. With 3 chest ovens and heatable water bath, with rail system above the ovens, with 2x 8 fans as air cooling unit, switch cabinets Schneider E-Technik Offenburg with S7 1500, was completely overhauled in 2019. On-site inspection is possible.

System czyszczący

Silberhorn Multijet S3

Niemcy

2018

używany

na żądanie

INNO28156

Wash basket dimensions: 2x 630x560x200mm, cleaning agent: aqueous cleaner, filling capacity: 3750l, max. back-up fuse: 250A, mains connection: 230/400VAC, connected load: 175kW, control panel: Janitza UMG 96 RM. On-site inspection is possible.

Szlifierka ze stołem obrotowym

Blanchard 42-84

Niemcy

1962

używany

na żądanie

INNO28155

Table diameter: 2133.6mm, grinding head diameter: 1066.8mm, switch cabinet dimensions: 1200x500x2000mm, length: 2700mm, width: 6300mm, height: 4300mm, weight: 35t, including documentation, circuit diagram and history, plus photos of overhaul and repair, geometric overhaul and new switch cabinet in 2005, repair in May 2017, grinding head rewound, stator/ three-phase armature overhauled, grinding shaft/ king shaft overhauled, head with new bearings.

Linia taktowa

Buffoli 3D-TR-8-4 CNC

Niemcy

2017

używany

na żądanie

INNO28153

A fully automatic rotary transfer system with a Buffoli transfer machine is available. Processes: Loading/contour milling/drilling/chamfering/reaming/pressing. The finished parts are packed, labeled and palletized. Automation: Evolut, robots: Kuka, replenishment control: Kanban. Documentation available. On-site inspection is possible.

Frezarka narzędziowa CNC

Deckel Maho DMF 220 linear

Niemcy

nieznany

używany

na żądanie

INNO28147

A 5-axis CNC tool milling machine DMG Mori is available. Travel X/Y/Z: 2200mm/560mm/720mm, B-axis: +/-100°, speed: 1800rpm, tool holder: SK40, power at 40%: 35kW, rapid traverse X/Y/Z: 100m/min / 50m/min / 50m/min, feed: 50m/min, table dimensions X/Y: 2600mm/600mm, max. table load: 2200kg, control: Siemens 840D powerline with ShopMill.Table load: 2200kg, control: Siemens 840D powerline with ShopMill. The motor spindle, the Y-axis linear guide and the storage bladder of the machine were replaced in 06/2024.

Centrum obróbcze CNC

Dmg Mori NHX 4000

Niemcy

2017

używany

na żądanie

INNO28134

Travel X/Y/Z: 560mm/560mm/660mm, clamping surface: 400mm/400mm, spindle mount: HSK-A63, speed: 20000rpm, power: 25kW/35kW, torque: 130Nm/86Nm. Work table indexing: 0.001°, speed: 100 rpm. Tool positions: 40 + 60, ring magazine holder: BT40/SK/CAT40/HSK-A63, max. tool diameter: 70mm, max. tool length: 450mm, max. tool weight: 12kg. Including cooling lubricant system, chip conveyor, IKZ, filter system, oil mist separator and flow monitor. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/3000mm, weight: approx. 9500kg, control: CELOS with Siemens 840D sl Operate, operating hours: 41220h, spindle hours: 21663h. Documentation available. On-site inspection is possible.

Prasa ekscentryczna

Ebu H75F

Niemcy

nieznany

używany

na żądanie

INNO28131

Pressing force: 750kN, throat depth: 300mm, stroke adjustment: 16mm-140mm, ram adjustment: 80mm, stroke rate: 105/min, motor power: 4kW, table dimensions X/Y: 800mm/600mm, table height: 845mm, machine dimensions X/Y/Z: approx. 1700mm/1200mm/2500mm, weight: approx. 4200kg. The machine has had a crack for years, but this does not affect the stability or the UVV test. Documentation available. On-site inspection is possible.

Wiertarka słupowa

Donau Alpha

Niemcy

2010

używany

na żądanie

INNO28128

Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Coastone Cone 1600

Niemcy

nieznany

używany

na żądanie

INNO28127

Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.

Obrotnica do spawania

Reinartz Thieler 300 R

Niemcy

nieznany

używany

na żądanie

INNO28126

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

Szlifierka powierzchniowa

Proth PSGS-3060AH

Niemcy

1987

używany

na żądanie

INNO28125

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Piła taśmowa

Jaespa MSP-4

Niemcy

1990

używany

na żądanie

INNO28124

A Jaespa vertical metal band saw, filing, grinding and polishing machine is available. Roller diameter: 420mm, cutting height: 280mm, cutting width: 405mm, cutting speed: 25m-280m/min, table dimensions X/Y: 600mm/600mm, table inclination left/right: 15°/45°, working height: 955mm, saw blade length range: 3200mm-3400mm, drive power: 1.5kW. Machine dimensions X/Y/Z: approx. 1250mm/1000mm/2050mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Gp CNC 650

Niemcy

2012

używany

na żądanie

INNO28121

A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.

Prasa ekscentryczna

Paul Müller/schuler/hensel ExP 25/PE 25-250/EBU 25F

Niemcy

1988

używany

na żądanie

INNO28120

Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible.

Piec hartowniczy

Nabertherm Multitherm N7

Niemcy

1996

używany

na żądanie

INNO28108

Volume: 7l, power: 3kW, max. temperature: 1100°C, internal dimensions X/Y/Z: 230mm/250mm/120mm, external dimensions X/Y/Z: approx. 460mm/690mm/460mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.

Spawarka do naroży

Fröhlich/migatronic SAX700/Automig 273i

Niemcy

2018

używany

na żądanie

INNO28104

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.