▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [481 - 500 of 976]

Robot do obróbki profili

Kaltenbach KC 1200

Niemcy

2010

używany

na żądanie

INNO28050

With notching robot Kuka + transport system T13 / M150, equipped with oxy-fuel torch for steel profiles, sheets, rectangular tubes. Number of axes notching system: 8, transport system infeed length set up: approx. 13.5m (1 long version still available), transport system outfeed length set up: approx. 10.0m (4 standard trestles still available), electronics for cross conveyor infeed and outfeed: completely included in the control cabinet (without cross conveyor), safety fencing: only partially set up (complete fencing available), safety light barriers: not set up (completely available). With documentation, an on-site inspection is possible.

Tokarka dwuwrzecionowa CNC

Takisawa TT-500 GD

Niemcy

2018

używany

na żądanie

INNO28044

A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.

Walzenpresse

Köppern 52/7, 5ST315 DG 1 E 750x315

Niemcy

2018

używany

na żądanie

INNO28034

A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible.

CNC prasa precyzyjnego cięcia

Feintool GKP-F 160/GKP-F 250

Niemcy

2003

używany

na żądanie

INNO28033

There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible.

Tokarka

Wmw DLZ 630 IV x2000

Niemcy

1983

używany

na żądanie

INNO28026

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

Przeciągarka szczelinowa

Hahndor REWK 86/14

Niemcy

2007

używany

na żądanie

INNO28025

A Hahndorf grooving and broaching machine is available. Grooving: Stroke min./max.: 80mm/300mm, max. groove width: 34mm. Joint length: max. joint length: 300mm. Broaching: max. groove width: 14mm, max. broaching tool length: 640mm. Cutting speed forward/reverse: 3m/min, machine weight: approx. 300kg. Including various tools and accessories. Documentation available. On-site inspection is possible.

Szlifierka narzędziowa CNC

Smp Numaffut CA6

Niemcy

2001

używany

na żądanie

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Hurco VMX 50

Niemcy

2006

używany

na żądanie

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

Wiertarka słupowa

Webo GRADUA 60

Niemcy

1973

używany

na żądanie

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

NC-pudrowa lakiernia

Wma Warsteiner Montage Und Anlagentechnik

Niemcy

2003

używany

na żądanie

INNO27978

Three-chamber pre-treatment dimensions: 3600x1200x1900mm, washing entrance dimensions: 700x1500mm, manual painting booth dimensions: 800x1700mm, cycle time: 6min. With residual moisture dryer, Gema Optiflex 2 powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible. Available in February 2025.

Frezarka uniwersalna CNC

Deckel FP4-60

Niemcy

1999

używany

na żądanie

INNO27977

Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible.

Centrum obróbcze profili CNC

Tekna TK 426/3

Niemcy

1998

używany

na żądanie

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

Prasa

Gechter/burger SEM 70kN/DO 3

Niemcy

1990

używany

na żądanie

INNO27970

Two presses from different manufacturers are available. 1) Gechter SEM 70 KN, year of manufacture: 1990, pressing force: 70kN, type: knuckle-joint press, stroke: 5mm-62mm, max. installation height: 295mm, throat depth: 160mm, weight: approx. 350kg. 2) Two-stroke press Burger DO 3, pressing force: 3t, stroke rate: 80/min, throat: 140mm, stroke: 40mm, table dimensions X/Y: 280mm/380mm, working height: 810mm, ram surface: 115mm/100mm, machine dimensions X/Y/Z: approx. 800mm/1000mm/1400mm, weight: approx. 250kg. On-site inspection is possible.

Prasa do gięcia krawędzi

Zlatokov Pmp Trenčín LODD 200

Niemcy

1982

używany

na żądanie

INNO27956

Pressing force: 1961kN, working width: 4000mm, table width: 200mm, working height: 800mm, stroke rate: 28/min, clear width: 3450mm, motor power: 22kW, length: 4420mm, width: 2060mm, height: 3800mm, weight: 22.66t. With comprehensive documentation, machine with age-related signs of use and wear, associated dies and matrices in usable but heavily worn condition. On-site inspection possible.

Maszyna CNC do wyciągania rowków

Balzat 32/300

Niemcy

1991

używany

na żądanie

INNO27947

Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.

Tokarka centralna

Weiler Primus-LZ GRF

Niemcy

1978

używany

na żądanie

INNO27944

A barely used Weiler precision lead and feed spindle lathe is available. Turning diameter over bed/slide: 250mm/180mm, turning length: 450mm, spindle clearance: 23mm-24mm, speed: 3000rpm, drive power: 1.5kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 600kg. Including accessories. On-site inspection is possible.

Frezarka uniwersalna

Misal 765/C

Niemcy

1984

używany

na żądanie

INNO27941

Travel X/Y/Z: 1270mm/660mm/530mm, feed X/Y/Z: 1500mm/1500mm/54mm/min, rapid traverse X/Y/Z: 2500mm/2500mm/750mm, spindle power: 9.2kW, speed: 1420rpm, spindle taper: NST 50, table dimensions X/Y: 1700mm/500mm. Documentation available. On-site inspection is possible.

Tokarka centralna

Nardini SAGAZ SZ 250 T

Niemcy

1990

używany

na żądanie

INNO27940

Center width: 1500mm, center height: 250mm, turning diameter over bed/offset/over facing slide: 500mm/710mm/305mm, bed width: 340mm, spindle bore: 80mm, spindle diameter: 95mm, speed: 1500rpm. Stroke of face slide/top support: 300mm/170mm, top support swivel range: +/-45°, tailstock quill: 80mm, quill stroke: 205mm, motor power: 9kW. Machine dimensions X/Y/Z: approx. 3000mm/1400mm/1650mm, weight: approx. 2700kg. Documentation available. On-site inspection is possible.

Maszyna CNC do erodowania drutu

Matra-fanuc TAPE-CUT-W1

Niemcy

nieznany

używany

na żądanie

INNO27939

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

Szlifierka powierzchniowa

Ziersch Gmbh ZT 820

Niemcy

2008

używany

na żądanie

INNO27936

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.