Tokarka CNC

Traub TND 400

Niemcy

1995

używany

na żądanie

INNO31488

Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible.

więcej

Frezarka pionowa

Bernhard Steinel SV 4g

Niemcy

1969

używany

na żądanie

INNO31487

Offered is a universal tool milling machine. Working area X/Y/Z: approx. 330mm/145mm/370mm, table clamping surface: 630mm × 180mm, spindle speeds: 63-3150rpm (across 8 steps), spindle mount: SK 30, connected load: 380V/16A, control: manual. Equipped with swiveling vertical head, manual axis feed via handwheels, T-slot table, integrated chip support tray. Overall dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm. Inspection possible by arrangement.

więcej

Frezarka pozioma

Fritz Werner HF 1.6

Niemcy

1977

używany

na żądanie

INNO31485

Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.

więcej

Jednowrzecionowe automaty tokarskie sterowane krzywką

Index C 29

Niemcy

nieznany

używany

na żądanie

INNO31483

Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.

więcej

Pionowe centrum obróbcze

Hurco VMX 60/40T

Niemcy

nieznany

używany

na żądanie

INNO31480

Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible.

więcej

Giętarka obrotowa

Thalmann THAKO 30-8,2 M

Niemcy

2010

używany

na żądanie

INNO31479

A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible.

więcej

Szybkoobrotowa wiertarka promieniowa

Donau DANUMERIC 440

Niemcy

2018

używany

na żądanie

INNO31477

A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement.

więcej

W pełni zautomatyzowana maszyna do zaciskania

Schleuniger CC 64-2

Niemcy

2009

używany

na żądanie

INNO31476

A fully automatic cable processing machine Schleuniger with two stations and one compact station Strunk is available. Cable length range: 55mm-65000mm, conductor cross-section range: 0.13mm²-6mm², max. stripping length: 18mm, max. feed speed: 12m/s. Machine dimensions X/Y/Z: approx. 3750mm/1450mm/1850mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.

więcej

Tokarka

Martin DLZ 602

Niemcy

1961

używany

na żądanie

INNO31463

Turning diameter over bed: 600mm, turning length: 1000mm, spindle head: 8, spindle bore: 63mm, tailstock quill size: MK5, gap: yes, faceplate diameter: 500mm, machine dimensions X/Y: 2800mm/1100mm, weight: approx. 2200kg. Including quick-change tool holder Multifix C, faceplate and coolant device. The front guide of the machine is worn and the feed in the apron is blocked. The bed slides can be moved via the lead screw. Documentation available. An on-site inspection is possible.

więcej

Automatyczna piła taśmowa

Jaespa COMPACT 2

Niemcy

2011

używany

na żądanie

INNO31452

A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement.

więcej

System cięcia plazmowego

Kjellberg HiFocus 130 / PGV 2 / PGC

Niemcy

2010

używany

na żądanie

INNO31451

A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement.

więcej

Frezarka CNC

Cmc BF-01

Niemcy

1992

używany

na żądanie

INNO31450

A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.

więcej

Piła tarczowa chłodnicza

Trennjaeger LTS-400 M

Niemcy

1989

używany

na żądanie

INNO31449

A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.

więcej

Nożyce gilotynowe

Atlantic ATS

Niemcy

1990

używany

na żądanie

INNO31448

A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement.

więcej

Prasa przegubowa pneumatyczna

Gechter 45 kN HKPL

Niemcy

2011

używany

na żądanie

INNO31445

A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Pneumatic foot switch, piece counter, maintenance unit, mechanical height adjustment, base frame, T-slot table X/Y: 200mm/160mm. Weight: approx. 185kg, overall dimensions X/Y/Z: approx. 800mm/650mm/1850mm. Inspection possible by arrangement.

więcej

Pneumatyczna prasa kolanowa

Gechter 45 kN HKPL

Niemcy

2012

używany

na żądanie

INNO31444

A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Machine frame, maintenance unit, mechanical fine adjustment, T-slot table X/Y: 200mm/160mm. Weight: approx. 180kg, overall dimensions X/Y/Z: approx. 800mm/600mm/1800mm. Inspection possible by arrangement.

więcej

Prasa pneumatyczna

Schmidt 76-100-12

Niemcy

2011

używany

na żądanie

INNO31435

2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement.

więcej

Prostownica

Arku RM 1012/B

Niemcy

1970

używany

na żądanie

INNO31431

A roller straightening machine is offered. Working width: approx. 100-120mm, max. material thickness: approx. 0.1-1.0mm, multi-roll system, 4 integrated ARKU precision dial gauges, inspection is possible by arrangement.

więcej

System czyszczący

Multimatic FP-50-V

Niemcy

2005

używany

na żądanie

INNO31417

Cleaning medium: perchloroethylene, treatment chamber dimensions: 690x740x277mm, basket holder dimensions: 400x620x410mm, max. loading weight: 80kg, basket speed: 2-4/min, usable volume tank 1/2: 270/160l, solvent capacity: 450l, compressed air connection: 6bar, control: Siemens SIMATIC OP17, length: 2550mm, width: 1900mm, height: 2500mm, weight: 3.2t, with documentation. An inspection on site is possible.

więcej

Maszyna do erodowania drutu

Charmilles Robofil 240 CC

Niemcy

2003

używany

na żądanie

INNO31412

A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki