Wytaczarka-frezarka CNC

Busch FB 1-150

Niemcy

1992

używany

na żądanie

INNO28595

Travel X/Y/Z: 1000mm/150mm/200mm, table dimensions X/Y: 1300mm/300mm, speed: 6000rpm, tool positions: 8, control: Siemens Sinumerik 810, weight: approx. 3200kg. Coolant system included. Documentation available. On-site inspection is possible.

więcej

Prasa jednokolumnowa

Neff T 6.3/EP10

Niemcy

1989

używany

na żądanie

INNO28594

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

więcej

Wiertarka

Alzmetall Abomat 30

Niemcy

1982

używany

na żądanie

INNO28592

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

więcej

Szlifierki do wałków

Studer RHU 1000/125-DR

Niemcy

1979

używany

na żądanie

INNO28591

Center height: 125mm, center width: 1025mm, longitudinal slide travel: 1020mm, table speed: 5.5m/min, rotary table tilt: 8°, workhead swivel: 90°, speed: 675rpm, 3-jaw chuck diameter: 160mm. Documentation available. On-site inspection is possible.

więcej

Piła taśmowa

Mep Shark 281

Niemcy

nieznany

używany

na żądanie

INNO28590

Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.

więcej

Odciąg oparów spawalniczych

Teka Filtercube 4H

Niemcy

2014

używany

na żądanie

INNO28589

Motor power: 7.5kW, air volume flow: 8000m³/h, negative pressure: 4600Pa, filter area: 100m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 800mm/900mm/3200mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

więcej

Maszyna do cięcia laserowego CNC

Bystronic ByStar Fiber 10kW

Niemcy

2017

używany

na żądanie

INNO28587

Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

więcej

Szlifierka do wierteł

Haarmann HSP 50

Niemcy

1978

używany

na żądanie

INNO27511

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

więcej

Piła taśmowa

Jaespa Concept 260/630S

Niemcy

2010

używany

na żądanie

INNO28582

Motor power: 4kW, cutting speed: 15m-90m/min, saw blade dimensions X/Y/Z: 5150mm/13mm/0.9mm, saw blade type: M42/4ZpZ, material support height: 720mm, angle: +/-30°, machine dimensions X/Y/Z: approx. 2850mm/1400mm/1850mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC z kolumną ruchomą

Soraluce FL 6000

Niemcy

2011

używany

na żądanie

INNO28578

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

więcej

Wytaczarka panelowa CNC

Union BFP 130/7

Niemcy

1992

używany

na żądanie

INNO28577

A Union horizontal drilling and milling machine overhauled in 2009 is available. Spindle diameter: 130mm, tool holder: ISO30, travel X/Y: 11500mm/3000mm, column movement Z: 420mm, drilling spindle movement W: 900mm, facing slide movement U: 320mm, spindle speed: 1000rpm, face support speed: 250rpm. Feed in all axes: 2500mm/min, rapid traverse X/Y: 5000mm/min, rapid traverse Z: 3600mm/min, rapid traverse W/U: 3150mm/min, connected load: 100kW, spindle power: 50kW. Machine dimensions X/Y/Z: approx. 17000mm/3000mm/6500mm, total system weight: approx. 60t, control system: PFP 130 NC. The drives, switchgear and control system were overhauled in 2009. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

więcej

Piec do wyżarzania

Herdieckerhoff STE 300/1000

Niemcy

1986

używany

na żądanie

INNO28576

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

więcej

Piec hartowniczy

Thermconcept KM 590/13

Niemcy

2013

używany

na żądanie

INNO28570

Inner dimensions X/Y/Z: 650mm/1500mm/600mm, outer dimensions X/Y/Z: 1500mm/3000mm/2400mm, volume: 590l, output: 50kW, maximum temperature: 1280°C, weight: approx. 1450kg. The oven shows some signs of use and a few firebricks are broken. Without pneumatic cylinder. Documentation available. On-site inspection is possible.

więcej

Maszyna do cięcia laserowego CNC

Trumpf TruMatic L 3003 B

Niemcy

1992

używany

na żądanie

INNO28569

Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Dmg Mori DMC 1035 V

Niemcy

2010

używany

na żądanie

INNO28568

Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25m/min, feed: 20m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool positions: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Including chip conveyor, DMG EcoLine UNO 115 tool presetter, machine vices, clamping tools and various tool holders. The buffer battery is empty and may need to be replaced. Documentation available. On-site inspection is possible.

więcej

System czyszczący

Perkute FR 130

Niemcy

2006

używany

na żądanie

INNO28567

A Perkute Clean-o-mat front-loader spray cleaning system is available. Pump capacity: 7.5kW, heating capacity: 18kW, max. rotary basket load: 2000kg, max. compressed air: 10bar, empty weight: approx. 1000kg. On-site inspection is possible.

więcej

Prasa do szklenia

Eder + Müller VKP-KH

Niemcy

2003

używany

na żądanie

INNO28549

A glazing press is available for mounting and fixing glass panes in window and door frames. Span: approx. 3750mm, drive type: pneumatic, operating pressure: 7bar. On-site inspection is possible.

więcej

Piła tarczowa

Eisele LMS II HVG-225

Niemcy

1980

używany

na żądanie

INNO28547

Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

więcej

Szlifierka powierzchniowa

Elb-schliff SW 15 VA II

Niemcy

1985

używany

na żądanie

INNO28546

An old ELB surface grinding machine is available. Grinding length: 1500mm, grinding width: 450mm, workpiece height: 340mm, magnetic clamping plate X/Y: 1500mm/400mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76mm, grinding spindle speed: 2890rpm, max. table load: 700kg, machine weight: approx. 5000kg. The drive spindle of the machine must be replaced. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Grob G350

Niemcy

2013

używany

na żądanie

INNO28537

Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 28000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg, spindle hours: approx. 6000h. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki