X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible.
Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulically and continuous: 0.5-6m/min, volume of the hydraulic unit: 35l, cooling device for grinding wheel/on demand: 30l. No defects known, with documentation, an on-site inspection is possible.
Gun: PH-3N, voltage: 400V, weight: 50kg. Supplied with operating manual, 2x ground cables with clamp BMS/BMK, gas connection, HZ-stud holder, adapter piece and key. An on-site inspection is possible.
Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools.
Basic equipment: thermally cross-linked wear-resistant PU working container lining (profiled), rotary table with flow-optimized carrier bars for sensitive workpieces, complete water drainage via stainless steel hollow shaft for wet processing, high-precision bearing of the rotary table (with corrosion-resistant ceramic sealing system for wet processing), 2x drive motor 0.9kVA with thermal protection, machine frame in steel construction. Control of the machining process via PLC with display of processing time, table speed, compound dosing, start delay, process interruption and operating hours, setting of time and speed parameters via touchscreen, start/stop buttons for program sequence, storage of 500 machining programs, table speed control via frequency converter, main switch/reset switch, with signal light green/yellow/red, with USB interface. 2x working containers each with 18l container volume, container inner diameter: 330mm. Operating voltage: 230/400V (slip gap operation), 50/60Hz, VS max. 16A, control voltage: 24V, protection class: IP 54, color: RAL7012 basalt grey and RAL7035 light grey, containers in RAL 5002, standards: VDE, UVV, CE, control cabinet with touchscreen CF 2x18 ZGZG, control: S7/1200, 2x working containers CF 18 ZG round ribs + PU-R, ceramic ring, for gapless operation of the working container during wet processing, 2x lids for working container CF 18 wet, water connection without valve, CF-9/18, connection diameter: 13mm, for removal of dirt particles from fresh water and circulation, longer service life for flow meter, 2x dosing unit WZG 2 CF 9/18, compound drawer 1 CF - 9/18, extension without hand sieves CF 2x18. Connected load: 2kVA, weight: 330kg. With documentation, without accessories. An on-site inspection is possible.
Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.
Obróbka metali i obrabiarki [21 - 40 of 997]
de-DE
en-US
