Maszyna do ciągnienia bębnów

Malmedie EH-5

Niemcy

1980

używany

na żądanie

INNO28571

A Malmedie ring pipe drawing machine is available. Drum diameter: 570mm, operating mode: single horizontal stroke, area of application: ring pipes. On-site inspection is possible.

więcej

Piec hartowniczy

Thermconcept KM 590/13

Niemcy

2013

używany

na żądanie

INNO28570

Inner dimensions X/Y/Z: 650mm/1500mm/600mm, outer dimensions X/Y/Z: 1500mm/3000mm/2400mm, volume: 590l, output: 50kW, maximum temperature: 1280°C, weight: approx. 1450kg. The oven shows some signs of use and a few firebricks are broken. Without pneumatic cylinder. Documentation available. On-site inspection is possible.

więcej

Maszyna do cięcia laserowego CNC

Trumpf TruMatic L 3003 B

Niemcy

1992

używany

na żądanie

INNO28569

Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Dmg Mori DMC 1035 V

Niemcy

2010

używany

na żądanie

INNO28568

Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25m/min, feed: 20m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool positions: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Including chip conveyor, DMG EcoLine UNO 115 tool presetter, machine vices, clamping tools and various tool holders. The buffer battery is empty and may need to be replaced. Documentation available. On-site inspection is possible.

więcej

System czyszczący

Perkute FR 130

Niemcy

2006

używany

na żądanie

INNO28567

A Perkute Clean-o-mat front-loader spray cleaning system is available. Pump capacity: 7.5kW, heating capacity: 18kW, max. rotary basket load: 2000kg, max. compressed air: 10bar, empty weight: approx. 1000kg. On-site inspection is possible.

więcej

Prasa do szklenia

Eder + Müller VKP-KH

Niemcy

2003

używany

na żądanie

INNO28549

A glazing press is available for mounting and fixing glass panes in window and door frames. Span: approx. 3750mm, drive type: pneumatic, operating pressure: 7bar. On-site inspection is possible.

więcej

Piła tarczowa

Eisele LMS II HVG-225

Niemcy

1980

używany

na żądanie

INNO28547

Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

więcej

Szlifierka powierzchniowa

Elb-schliff SW 15 VA II

Niemcy

1985

używany

na żądanie

INNO28546

An old ELB surface grinding machine is available. Grinding length: 1500mm, grinding width: 450mm, workpiece height: 340mm, magnetic clamping plate X/Y: 1500mm/400mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76mm, grinding spindle speed: 2890rpm, max. table load: 700kg, machine weight: approx. 5000kg. The drive spindle of the machine must be replaced. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Grob G350

Niemcy

2013

używany

na żądanie

INNO28537

Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 28000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg, spindle hours: approx. 6000h. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible.

więcej

Tokarka uniwersalna CNC

Mag Ias DUS 800 ti/6000

Niemcy

2013

używany

na żądanie

INNO28531

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

więcej

System czyszczący

Branson B452R

Niemcy

nieznany

używany

na żądanie

INNO24984

Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg.

więcej

Prasa krawędziowa CNC

Fasti 940-200-40

Niemcy

1998

używany

na żądanie

INNO28527

Working width: 4000mm, pressing force: 2000kN, max. operating pressure: 30MPa, connected load: 22.38kW, protective distance: 156mm, holding time: 98ms. Documentation available. On-site inspection is possible.

więcej

Router brzegowy

Hebrock AKV 83

Niemcy

1994

używany

na żądanie

INNO28523

A Hebrock edge milling machine is available. Workpiece height range: 10mm-50mm, max. edge thickness: 1mm, min. workpiece width: 50mm, min. workpiece length: 170mm, feed speed: 4m/min, connected load: 3kW. Machine dimensions X/Y/Z: approx. 1750mm/700mm/1250mm, weight: approx. 120kg. On-site inspection is possible.

więcej

Tokarka pionowa CNC

Emag VL 5 m LT

Niemcy

2003

używany

na żądanie

INNO28520

An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.

więcej

Suszarka korytowa

Fst Drytee VE-1

Niemcy

2013

używany

na żądanie

INNO28519

Two identical Drytee drying machines are available. Useful chamber dimensions X/Y/Z: 700mm/1400mm/1150mm, external dimensions X/Y/Z: approx. 1350mm/1600mm/1800mm, heating capacity: 36kW, operating temperature: 90°C, heating medium: thermal oil, heating medium temperature: 140°C, air circulation rate: 3x5200m³/h. Documentation available. On-site inspection is possible.

więcej

Frezarka

Wmw FSS 315-V

Niemcy

nieznany

używany

na żądanie

INNO28515

Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.

więcej

Szlifierka narzędziowa CNC

Strausak Fleximat 91 CNC

Niemcy

1991

używany

na żądanie

INNO28513

Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible.

więcej

Hydrauliczna wykrawarka

Boschert

Niemcy

1978

używany

na żądanie

INNO28512

A Boschert hydraulic notching and punching machine is available. Notching 4mm+6mm: 225mm/225mm, pressing force: 12.5t, table height: 900mm, power: 4kW, machine dimensions X/Y/Z: approx. 1100mm/800mm/1200mm, weight: approx. 1450kg. The motor of the machine is defective. On-site inspection is possible.

więcej

Frezarka CNC

Mazak VTC200-B-II

Niemcy

2002

używany

na żądanie

INNO28511

Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y/Z: 28020mm/655mm/640mm, max. table load: 800kg, speed: 12000rpm, spindle power: 18.5kW, tool holder: SK40, tool positions: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 2850mm/3350mm/2800mm, weight: approx. 6100kg, control: Mazatrol 640M. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Hyundai HD2200

Niemcy

nieznany

używany

na żądanie

INNO28510

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki