▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [301 - 320 of 1215]

Wiertarka do głębokich otworów

Irle ITB 40/1000

Niemcy

1980

używany

na żądanie

INNO31396

A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.

Piec retortowy

Pfs Anlagenbau Retortenofen

Niemcy

nieznany

używany

na żądanie

INNO31394

A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible.

Automatyczna prasa wykrawająca

Friedrich Petig RKP 5.8

Niemcy

2001

używany

na żądanie

INNO31392

An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.

Maszyna CNC do erodowania drutu

Agie AgieCut Classic 2 S

Niemcy

2002

używany

na żądanie

INNO31388

Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible.

Frezarka CNC

Anayak VH plus 2000

Niemcy

1999

używany

na żądanie

INNO31373

A CNC universal bed milling machine Anayak is available. Travel path X/Y/Z: 2000mm/1300mm/1460mm, table dimensions X/Y: 1350mm/1550mm, max. table load: 6000kg, speed: 3000rpm, spindle taper: ISO50, feed rate: 3m/min, rapid traverse: 10m/min, weight: approx. 24000kg, control system: Heidenhain TNC426CB. Documentation available. An on-site inspection is possible.

Frezarka CNC

Anayak FBZ-HV-2500

Niemcy

1998

używany

na żądanie

INNO31372

A CNC universal bed milling machine Anayak is available. Travel X/Y/Z: 2500mm/900mm/975mm, table dimensions X/Y: 2900mm/800mm, spindle taper: ISO50, spindle speed: 3000rpm, power: 22kW, feed: 6m/min, rapid traverse: 10m/min, tool positions: 30. Machine dimensions X/Y/Z: approx. 6000mm/3000mm/3000mm, weight: approx. 20000kg, control: Heidenhain TNC 426. Documentation available. An on-site inspection is possible. Expected to be available around September 2026.

Maszyna do erodowania drutu

Mitsubishi FX20K

Niemcy

1999

używany

na żądanie

INNO31367

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

Obrabiarka zespołowa

Sinico Sin-o-matic Top 2000 CSV

Niemcy

2005

używany

na żądanie

INNO31363

A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 81mm, max. workpiece length: 340mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible.

Obrabiarka zespołowa

Sinico Sin-o-matic Top 2000 r1 CNC

Niemcy

2011

używany

na żądanie

INNO31362

A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 110mm, max. workpiece length: 350mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible.

Maszyna do fazowania

Fritz Gross EBHA 60

Niemcy

2010

używany

na żądanie

INNO31361

A Fritz Gross pipe end processing machine is available. Connected load: 11kW, max. pipe diameter: 60mm, weight: approx. 1500kg. An on-site inspection is possible.

System czyszczący

Bous Trowamat 4765/30 WT

Niemcy

2013

używany

na żądanie

INNO31360

A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible.

Automat CNC do cięcia na zimno

Bewo SCF-90 Quatro

Niemcy

2008

używany

na żądanie

INNO31359

A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.

Piec do suszenia

Neitz M265

Niemcy

1974

używany

na żądanie

INNO31351

An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible.

Frezarka

Hermle/deckel FW 801/FW 710/FP 2

Niemcy

1987

używany

na żądanie

INNO31342

Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred.

Tokarka CNC

Traub TNS 60

Niemcy

1982

używany

na żądanie

INNO31341

General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible.

Maszyna do skręcania lin

Niehoff D 631

Niemcy

2014

używany

na żądanie

INNO31340

A Niehoff double twist stranding machine is available. Spool size: 630mm, max. spool width: 475mm, copper processing range: 0.09mm²-6mm², single wire diameter: 0.05mm-0.85mm, max. speed: 6000rpm, max. tensile force: 200N, machine dimensions X/Y/Z: approx. 3000mm/1700mm/1600mm, weight: approx. 3000kg, operating hours: approx. 7371h. Including frame and some accessories as well as spare parts. Documentation available. An on-site inspection is possible.

Zgrzewarka laserowa

Trumpf TruLaser Station 5004

Niemcy

2010

używany

na żądanie

INNO31330

A compact Trumpf CNC laser welding station is available. Laser source: TruPulse 124, wavelength: 1064nm, max. average power: 140W, min. pulse power: 300W, max. pulse power: 6000W, pulse duration range: 0.3ms-50ms, max. pulse energy: 30J, max. pulse frequency: 833Hz, travel X/Y/Z: 450mm/300mm/300mm, travel speed: 3m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.02mm, rotary table diameter: 120mm, rotational speed: 80rpm, max. table load: 50kg, machine weight: approx. 650kg. Documentation available. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Spinner MC 650

Niemcy

2006

używany

na żądanie

INNO31325

A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible.

Tokarka rewolwerowa

Leinen LC

Niemcy

1980

używany

na żądanie

INNO31324

An old, compact precision turret lathe Boley & Leinen is available. Speed: 4000rpm, tool stations: 6, center height: 90mm, distance between centers: 300mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Emco VMC 2000

Niemcy

1991

używany

na żądanie

INNO31323

A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible.