▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [281 - 300 of 1080]

Frezarka CNC

Dmg Mori DMU 60 P hi-dyn

Niemcy

2003

używany

na żądanie

INNO30610

Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Gildemeister NEF plus 500

Niemcy

1996

używany

na żądanie

INNO30604

A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible.

Szlifierka CNC do otworów

Wotan S3I

Niemcy

nieznany

używany

na żądanie

INNO30601

Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.

Kształtowarka

Welter WS 1250

Niemcy

2011

używany

na żądanie

INNO30600

A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible.

Automatyczna tokarka wielowrzecionowa CNC

Index MSC42C

Niemcy

1992

używany

na żądanie

INNO30596

Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.

Maszyna do cięcia laserowego CNC

Trumpf TruLaser 5030/TruFlow 5000

Niemcy

2008

używany

na żądanie

INNO30594

A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027.

Szlifierka powierzchniowa

Blohm Hanseat 9

Niemcy

1981

używany

na żądanie

INNO30590

Table dimensions X/Y: 900mm/300mm, max. grinding length: 900mm, max. grinding width: 350mm, max. table to spindle center distance: 575mm, max. table load: 670kg, max. table longitudinal movement/cross movement: 859mm/300mm, grinding spindle speed: 2800rpm, grinding wheel outer diameter min./max.: 400mm/165mm, bore diameter for 400mm: 127mm. Machine dimensions X/Y: approx. 1100mm/1100mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.

Frezarka

Mikron WF31C/155

Niemcy

nieznany

używany

na żądanie

INNO30589

Travel X/Y/Z: 500mm/500mm/400mm, table dimensions X/Y: 460mm/800mm, tool holder: SK40, speed: 4000rpm, feed rate: 3m/min, rapid traverse: 5m/min, weight: approx. 2500kg. On-site inspection is possible.

Precyzyjna Wiertarko-frezarka CNC

Kern HSPC 2522

Niemcy

2000

używany

na żądanie

INNO21774

Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.

Tokarka CNC

Spinner TC600 52 SMCY

Niemcy

2008

używany

na żądanie

INNO30587

Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls <120mm and CNC singulation for balls >120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.

Tokarka centralna

Martin D70

Niemcy

1968

używany

na żądanie

INNO30586

Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.

Frezarka i wiertarka

Deckel Maho MH 700

Niemcy

1972

używany

na żądanie

INNO30584

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Magazyn do podajnika barów

Fmb 5-55/3200-A

Niemcy

2008

używany

na żądanie

INNO30578

Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible.

Tokarka CNC

Spinner PD-CNC

Niemcy

2007

używany

na żądanie

INNO30577

Turning diameter: 120mm, turning length: 400mm, travel X/Z: 400mm/400mm, spindle bore: 42mm, speed: 8000rpm, chuck diameter: 150mm, tool stations: 12, tool interface: VDI 20. Machine dimensions X/Y/Z: approx. 2500mm/1400mm/1700mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Makino A55e-A225

Niemcy

2000

używany

na żądanie

INNO30567

A complete manufacturing cell with four horizontal machining centers Makino and a pallet storage and transport system is available. Makino A55: Travels X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. table load: 500kg, max. workpiece diameter: 630mm, max. workpiece height: 1000mm, rapid traverse: 84m/min. Complete system dimensions: approx. 24000mm/8000mm, weight: approx. 8500kg. The images and videos show an identical system. The configuration of the offered and the illustrated cells is essentially identical. Documentation available. On-site inspection is possible.

Tokarka CNC

Gildemeister NEF CT 60

Niemcy

1990

używany

na żądanie

INNO30562

A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible.

Stół obrotowy

Everwand & Fell/vermotec Vulkan/Vartant

Niemcy

2000

używany

na żądanie

INNO30558

Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible.

System czyszczący

Mafac Java

Niemcy

2011

używany

na żądanie

INNO30557

A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible.

Gramofon

Froriep 40 TDV 320

Niemcy

1962

używany

na żądanie

INNO30556

A heavy-duty rotary table is offered that was completely overhauled in 2024. Control cabinet: new, motors/components: new, table size X/Y: 3200mm/3200mm, max. table load: 40000kg. Travel distance table slide: 1750mm. Control: Siemens, measuring systems: Heidenhain, control cabinet in transport fixture, regularly maintained, documentation: original plans, wiring diagrams 2024, terminal plan, operating manual, machine weight: approx. 30000kg. Inspection is possible by arrangement.

Tokarka CNC

Spinner TC 65-MC

Niemcy

2005

używany

na żądanie

INNO30547

A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement.