▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [261 - 280 of 1080]

Automatyczna giętarka do drutu CNC

V&c VC-REC-08-Advanced

Niemcy

2018

używany

na żądanie

INNO30672

A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible.

Tokarka uniwersalna

Bulmak 400M

Niemcy

nieznany

używany

na żądanie

INNO30670

A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.

Walcownia

Omcca HSI.L H3 2050.8.6

Niemcy

1998

używany

na żądanie

INNO30669

A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible.

Piła taśmowa CNC

Kasto KASTOfunctional A

Niemcy

2003

używany

na żądanie

INNO30666

A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Chiron FZ 22 high-speed

Niemcy

nieznany

używany

na żądanie

INNO30665

Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible.

Pionowe centrum obróbcze CNC

Bridgeport Interact 412

Niemcy

nieznany

używany

na żądanie

INNO30664

Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible.

Frezarka CNC

Deckel FP 50 UC

Niemcy

nieznany

używany

na żądanie

INNO30663

A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible.

Frezarka CNC

Axa VHC M3

Niemcy

2003

używany

na żądanie

INNO30652

A CNC large-format machining center Axa including peripheral equipment is available. Travel X/Y/Z: 4000mm/900mm/950mm, working area X/Y: 4000mm/700mm, tool stations: 72, spindle speed: 10000rpm, control: Heidenhain iTNC 530, operating hours: 77956h, spindle hours: 29342h, power-on hours: 80109h. Including chip conveyor, internal cooling, chip spray gun, oil mist extraction, handwheel, probe and tool measurement Blum Laser. Documentation available. An on-site inspection is possible.

Wiertarka kolumnowa

Ecker & Schmidt ES 23/2V

Niemcy

nieznany

używany

na żądanie

INNO30647

A pillar drilling machine in double column design Ecker und Schmidt is available. Number of spindles: 2, drilling capacity in steel: 23mm, throat depth: 330mm, drilling stroke: 120mm, max. workpiece height: 750mm, spindle taper: MK1, column diameter: 130mm, table dimensions X/Y: 760mm/360mm. Machine dimensions X/Y/Z: approx. 1100mm/1150mm/2100mm, weight: approx. 700kg. On site inspection is possible.

Piła taśmowa

Knuth HB 325

Niemcy

1992

używany

na żądanie

INNO30646

A semi-automatic horizontal bandsaw Knuth is available. Miter range: 0°-60°, min. cutting range: 25mm, max. cutting diameter: 325mm, max. cutting diameter X/Y: 400mm/315mm, saw band speed: 100m/min, saw band dimensions X/Y/Z: 4380mm/34mm/1.1mm. Machine dimensions X/Y/Z: approx. 2150mm/2150mm/1650mm, weight: approx. 1800kg. An on-site inspection is possible.

Frezarka

Deckel FP3/4A-TC

Niemcy

1987

używany

na żądanie

INNO30645

A CNC universal milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/400mm, table dimensions X/Y: 700mm/460mm, max. table load: 350kg, tool holder: SK40, quill stroke: 80mm, speed: 4000rpm, feed rate: 3600mm/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2200mm, weight: approx. 2500kg, control: Contour 3. The tool change magazine is no longer in operation. Documentation available. An on-site inspection is possible.

Szlifierka powierzchniowa

Elb SW 9

Niemcy

nieznany

używany

na żądanie

INNO30644

A surface grinding machine ELB-Schliff with position display is available. Magnetic chuck dimensions X/Y: 900mm/450mm, grinding length: 900mm, grinding width: 450mm. Documentation available. An on-site inspection is possible.

Hydrauliczne nożyce gilotynowe

Baykal MGH 3100x10

Niemcy

2005

używany

na żądanie

INNO30643

A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible.

Piła tarczowa na zimno

Wagner WHC 630 A-NC

Niemcy

1991

używany

na żądanie

INNO30639

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

Giętarka do rur

Tracto-technik PBS Tubomat G 3001

Niemcy

2019

używany

na żądanie

INNO30638

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

Tokarka centralna

Weiler Condor VS 1

Niemcy

nieznany

używany

na żądanie

INNO30633

A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible.

Tokarka centralna

Heidenreich VDF 18 RO

Niemcy

1980

używany

na żądanie

INNO30616

Center height: 180mm, swing diameter over bed/cross slide: 360mm/190mm, distance between centers: 750mm, speed: 1250rpm, machine dimensions X/Y/Z: approx. 2800mm/1000mm/1300mm, weight: approx. 1750kg. An on-site inspection is possible.

System spawania na robotach

Severt MIG/MAG

Niemcy

2006

używany

na żądanie

INNO30615

A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible.

Walcownia

Fasti ASI/M 2,15x130

Niemcy

nieznany

używany

na żądanie

INNO30612

A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi CNC

Bystronic P225/410

Niemcy

2007

używany

na żądanie

INNO30611

A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible.