▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Obróbka metali i obrabiarki

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [201 - 220 of 1240]

System cięcia płomieniowego

Esab COMBIREX DX 3000

Niemcy

2011

używany

na żądanie

INNO32120

Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible.

Frezarka portalowa CNC

Waldrich Siegen PF-S-150

Niemcy

1953

używany

na żądanie

INNO32119

Offered for sale is a WaldrichSiegen CNC portal milling machine for horizontal and vertical milling as well as drilling of large workpieces. Table travel: 14000mm, crossrail saddle travel: 4500mm, crossrail travel: 4000mm, quill travel: 450mm, positioning accuracy of table/crossrail saddle/crossrail/quill: 0.05mm, distance between columns: 4545mm, distance from table to spindle: 4000mm, table size/clamping surface X/Y: 14000mm/4350mm, main spindle motor power: 125kW, main spindle tool interface: ISO SK60, max. table load: 200t, max. point load: 10000kg, control: Siemens 840D, measuring systems: Heidenhain, axis drives: Siemens/Dornhoff. Including an angle-adjustable universal milling head, angle milling heads with installation heights of 800mm/850mm/1400mm, a 1400mm work spindle extension, adapter plates for the work spindle with 400mm/220mm and chip conveyors on the left/right below floor level. The saddle guideways require adjustment. The machine was built in 1953, conversion of the original planer into a portal milling machine by WaldrichSiegen with a completely new milling saddle: 1974, CNC upgrade with a new electrical system: 2001, conversion of the table drive to NC: 2015, conversion of the crossrail drive to a gantry configuration: 2024. Machine dimensions X/Y/Z: approx. 40000mm/10000mm/9000mm, weight: approx. 350t. Documentation available. Inspection possible by arrangement.

Piła taśmowa

Tmj PP 502 G

Niemcy

nieznany

używany

na żądanie

INNO32118

A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement.

Piła taśmowa

Kasto SSB 260 VA

Niemcy

nieznany

używany

na żądanie

INNO32117

Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible.

Maszyna do gratowania rur

Combicore

Niemcy

2000

używany

na żądanie

INNO32115

A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.

Szlifierka do kół zębatych

Höfler Supra 1503

Niemcy

1995

używany

na żądanie

INNO32114

A Höfler gear grinding machine is offered. Module range: 2-25, max. gear diameter: 1500mm, max. gear width: 720mm, min./max. generating grinding stroke: 60mm/750mm, ram stroke rate: 20-200double strokes/min, number of teeth: freely selectable, max. generating speed: 900mm/min, table diameter: 1000mm, distance between centers: 1250mm, min./max. grinding wheel diameter: 300mm/400mm, grinding wheel bore: 127mm, grinding wheel width: 45mm, weight: approx. 34t. Including paper band filter, counter support with steady rest and balancing unit. Documentation available. Inspection possible by prior arrangement.

Szlifierka do kół zębatych

Niles ZSTZ 06

Niemcy

1983

używany

na żądanie

INNO32113

A Niles gear grinding machine is offered. Module range: 2-14, table diameter: 630mm, workpiece dimensions X/Y/Z: 800mm/290mm/1500mm, min./max. generating grinding stroke: 20mm/280mm, ram stroke rate range: 20-280double strokes/min, min./max. number of teeth: 5/360, root diameter: 50mm, max. tip diameter: 800mm, min./max. grinding wheel diameter: 270mm/350mm, grinding wheel bore: 127mm, grinding wheel speed: 2450rpm, weight: approx. 10000kg. Including paper band filter, cabinet with change gears and oil mist extraction unit. Inspection possible by appointment.

Szlifierka do kół zębatych

Niles ZSTZ 630

Niemcy

1981

używany

na żądanie

INNO32112

A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible.

Centrum obróbcze CNC

Deckel Maho DMU 70 eV

Niemcy

2003

używany

na żądanie

INNO32108

A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible.

Frezarka uniwersalna CNC

Hermle UWF 1001

Niemcy

1989

używany

na żądanie

INNO32107

X-axis travel: 700 mm, Y-axis travel: 550 mm, Z-axis travel: 500 mm, spindle speed: 25 to 4200 rpm, three speed ranges, feed rate: 1 to 5000 mm/min, rapid traverse in X, Y and Z: 10 m/min, vertical quill travel: 95 mm, clamping table dimensions: 1000 x 500 mm, spindle motor power: 12 kW, connected load: 18 kW, control system: Heidenhain TNC 355, length: 4260 mm, width: 4400 mm, height: 2300 mm, weight: 3.5 t, operating hours: 31,248 h. The machine is equipped with an SK40 tool spindle in accordance with DIN 2079, a swivelling spindle head, a spindle head that can be swung away for machining with the horizontal spindle, an outboard support for horizontal machining, direct measuring systems, a coolant system with a 100 litre reservoir, approximately 38 tool holders, most of which are fitted with tools, a table with tool holders, a workbench with cabinet, various hand tools, various clamping devices, a three-jaw chuck with clamping ring and documentation. The screen has burn-in marks but is still readable. An on-site inspection is possible.

Jednowrzecionowa tokarka CNC

Gildemeister NEF plus 500

Niemcy

1999

używany

na żądanie

INNO32106

Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.

Prasa do gięcia krawędzi

Eht EHP 20-35

Niemcy

1984

używany

na żądanie

INNO32104

Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible.

Magazyn do podajnika barów

Iemca VIP 70/1 CNC

Niemcy

1999

używany

na żądanie

INNO32102

Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.

Młotek z matrycą o krótkim skoku

Bêché KGH 1,6

Niemcy

1991

używany

na żądanie

INNO32100

A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible.

Prasa transferowa

Gräbener GSET 2-250-280-315

Niemcy

1997

używany

na żądanie

INNO32099

A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement.

Obrabiarka elektroerozyjna głębinowa

Zimmer + Kreim Genius 850

Niemcy

2004

używany

na żądanie

INNO32096

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.

Maszyna do cięcia laserowego CNC

Trumpf TruLaser 5030

Niemcy

2008

używany

na żądanie

INNO32095

A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible.

Frezarka narzędziowa

Optimum OPTImill MT 50

Niemcy

2022

używany

na żądanie

INNO32091

A universal precision drilling and milling machine by Optimum is available. Speed: 1750rpm, spindle sleeve travel: 120mm, milling head swivel: +/-45°, vertical reach range: 24mm-650mm, horizontal reach range: 0mm-185mm, spindle-to-cross table distance: 60mm-390mm, drilling capacity in steel: 30mm, max. face mill diameter: 100mm, max. end mill diameter: 25mm, cross table dimensions X/Y: 1000mm/240mm, max. table load: 160kg, travel X/Y/Z: 580mm/200mm/340mm, X-axis feed: 720mm/min, machine dimensions X/Y/Z: approx. 1300mm/1100mm/2200mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

Maszyna do prostowania i przycinania drutu

F. W. Bündgens UD 2

Niemcy

1970

używany

na żądanie

INNO32083

Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible.

Prasa dziurkująca

Alfred Raith Alfra Press 500

Niemcy

1987

używany

na żądanie

INNO32081

A small Alfred Reith bench punch is available. Punching force: 50kN, max. round hole diameter: 60mm, max. square hole dimensions X/Y: 46mm/46mm, max. mild steel sheet thickness: 3mm, max. stainless steel sheet thickness: 2mm, max. aluminum thickness: 4mm, throat depth: 500mm, stroke: 66mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.