▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [1 - 20 of 1019]

Szlifierka do otworów

Fortuna ES 450-1500

Niemcy

1955

używany

na żądanie

INNO30754

A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

Szlifierka do zewnętrz wałków

Fortuna ESU 350-1500

Niemcy

1958

używany

na żądanie

INNO30753

Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible.

Frezarka CNC

Deckel Maho DMU 60 E

Niemcy

2000

używany

na żądanie

INNO30746

Travel X/Y/Z: approx. 600mm/525mm/500mm, table dimensions X/Y: 1000mm/550mm, max. table load: 350kg, tool holder: SK40, speed: 12000rpm, tool positions: 25, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2900mm/2000mm/2300mm, weight: approx. 4500kg, control: Heidenhain, operating hours: approx. 87955h, spindle hours: approx. 21800h. Documentation available. On site inspection is possible.

Piec komorowy z cyrkulacją

Padeltherm KEU 4063/400

Niemcy

2005

używany

na żądanie

INNO30742

Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible.

Tokarka dwuwrzecionowa CNC

Gildemeister Twin 32

Niemcy

2003

używany

na żądanie

INNO30741

A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.

Tokarka pionowa CNC

Emag VL 3 mLT

Niemcy

2004

używany

na żądanie

INNO30738

A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible.

Tokarka CNC

Mazak Quick Turn Nexus 250/1000L

Niemcy

2005

używany

na żądanie

INNO30737

Distance between centers: 1000mm, turning diameter: 350mm, speed: 4000rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/1900mm, weight: approx. 4500kg, control: Mazak Mazatrol 640. Including tool measurement system and chip conveyor. Documentation available. On-site inspection is possible. Expected to be available from May 2026.

Frezarka portalowa CNC

Fooke Endura 8 - 30/25/11,5/5-28

Niemcy

1999

używany

na żądanie

INNO30736

A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible.

Frezarka

Deckel FP 1

Niemcy

1986

używany

na żądanie

INNO30735

A universal tool milling machine Deckel from the 1980s is available. Travel X/Y/Z: 300mm/160mm/340mm, table dimensions X/Y: 600mm/250mm, max. table load: 150kg, tool interface: SK40, speed: 2000rpm, feed rate: 1200mm/min, machine dimensions X/Y/Z: approx. 1200mm/1100mm/1500mm, weight: approx. 700kg. On-site inspection is possible.

Centrum toczenia i frezowania CNC

Gildemeister CTX 310

Niemcy

2009

używany

na żądanie

INNO30734

A CNC universal turning and milling machine DMG Mori is available. Travel X/Z: 160mm/450mm, turning diameter over bed/face slide: 330mm/260mm, distance between centers: 450mm, chuck diameter: 210mm, speed: 5000rpm, spindle power: 16.5kW/11kW, tool positions: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2000mm/1800mm, weight: approx. 3500kg, operating hours: 18127h. Dokumentation vorhanden. On-site inspection is possible.

Szlifierki do wałków CNC

Bahmüller AS 650-CNC

Niemcy

1994

używany

na żądanie

INNO30717

Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible.

Piec komorowy

Energo KSF 500

Niemcy

1992

używany

na żądanie

INNO30714

Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible.

Tokarka CNC

Index G 200 Ratioline

Niemcy

2006

używany

na żądanie

INNO30711

Turning diameter: 220mm, main spindle bore: 65mm, counter spindle bore: 60mm, tool positions: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump output: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/3000mm/2000mm, weight: approx. 9500kg, control system: Siemens 840D, operating hours: approx. 115000h. Including multi-channel loading magazine Breuning/IRCO PROFImat 65.8-PR270/8, portal unloading unit, chip conveyor, coolant system, high-pressure pump and spare parts. Documentation available. On-site inspection is possible. Expected to be available from May 2026.

Tokarka CNC

Index G 200 Ratioline

Niemcy

2003

używany

na żądanie

INNO30710

A fully autonomous CNC dual-spindle turning machine Index is available. Turning diameter: 220mm, main spindle bar capacity: 65mm, main spindle power chuck diameter: 210mm, sub-spindle bar capacity: 60mm, sub-spindle power chuck diameter: 210mm, tool stations: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump capacity: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/4350mm/2000mm, weight: approx. 10500kg, operating hours: approx. 92000h. Including bar loader FMB turbo 8-80 XT/3200A, automatic loading and unloading system alphaMAX 6-axis, chip conveyor, coolant system, high-pressure pump and spare parts. Operation with the loading and unloading system is designed for disc diameters from 80mm to 220mm. This is a fully automated system without operator. Documentation available. On-site inspection is possible. Expected to be available from June 2026.

Frezarka CNC

Haas VF-2

Niemcy

2014

używany

na żądanie

INNO30709

A CNC vertical milling machine Haas is available. Travel X/Y/Z: 762mm/406mm/508mm, feed rate: 16.5m/min, rapid traverse: 24.4m/min, table dimensions X/Y: 914mm/356mm, max. table load: 1361kg, tool stations: 24, tool holder: SK40, spindle speed: 15000rpm, power: 5kW/7kW, torque: 63Nm/88Nm. Machine dimensions X/Y/Z: approx. 2500mm/2350mm/2550mm, weight: approx. 3600kg, operating hours: approx. 15700h. Including full enclosure, 3D infrared probe Renishaw 40-2, zero point clamping system, vacuum unit and a set of tool holders. Documentation available. An on-site inspection is possible.

Prasa dwukolumnowa

Rhodes S2-350-60-36

Niemcy

nieznany

używany

na żądanie

INNO30708

Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible.

Komórka do grawerowania laserowego

Odevis Automation

Niemcy

2014

używany

na żądanie

INNO30707

A complete laser processing and marking system SIC-Marking is available. Stations: 3, table type: vacuum clamping table, processing area per station X/Y: 1000mm/1600mm, laser wavelength: 10600nm/1064nm, processes: evaporation/cleaning/structuring/surface processing, overall system dimensions X/Y/Z: approx. 25000mm/3000mm/3000mm, operating hours: approx. 2000h. Station 1: laser type: Synrad CO2 laser, number of lasers: 6, laser power: 100W, pulse frequency range: 0kHz-100kHz, power density: 250kW/cm², processed materials: polyamide/PVB/PET, processes: melting/evaporation. Station 2: laser type: IPG fiber laser, number of lasers: 6, laser power: 250W, pulse frequency range: 20kHz-500kHz, power density: 250MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: structuring/melting/evaporation. Station 3: laser type: IPG fiber laser, number of lasers: 3, laser power: 300W, pulse frequency range: 2kHz-200kHz, power density: 3MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: surface processing. The coating of the F-Theta lenses at station 2 is slightly deformed. Documentation available. An on-site inspection is possible.

5-osiowe centrum obróbcze CNC

Dmg DMF 180

Niemcy

2009

używany

na żądanie

INNO30706

A CNC 5-axis machining center Deckel Maho (DMG Mori) in high spindle speed version is available. Travel X/Y/Z: 1800mm/700mm/700mm, B-axis swivel range: +/-110°, C-axis: 360°, table dimensions X/Y: 2100mm/700mm, max. fixed table load: 1500kg, rotary table diameter: 750mm, max. rotary table load: 500kg, speed: 18000rpm, tool holder: HSK-63, tool positions: 30, feed rate: 20m/min, rapid traverse: 40m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 5600mm/4300mm/2700mm, weight: approx. 13000kg, control: Heidenhain iTNC 530, power-on hours: 99867h, spindle hours: 39904h. The last spindle replacement was carried out at 29613h in July 2021. Includes chip conveyor and IKZ (integrated cooling system). Documentation available. An on-site inspection is possible.

Szlifierka do zewnętrz wałków CNC

Hol-monta UB 40/1000 CNC

Niemcy

nieznany

używany

na żądanie

INNO30705

A CNC external cylindrical grinding machine Hol-Monta (TOS-Hostivar) is available. Swing diameter: 400mm, distance between centers: 1000mm, accuracy: +/-0.02mm, max. workpiece weight: 500kg, grinding wheel diameter: 500mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 4700mm/2050mm/1900mm, weight: approx. 5500kg, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.

Tokarka skośna

Traub TND 200

Niemcy

nieznany

używany

na żądanie

INNO30704

A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.