▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [621 - 640 of 995]

CNC prasa precyzyjnego cięcia

Feintool GKP-F 160/GKP-F 250

Niemcy

2003

używany

na żądanie

INNO28033

There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible.

Tokarka

Wmw DLZ 630 IV x2000

Niemcy

1983

używany

na żądanie

INNO28026

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

Szlifierka narzędziowa CNC

Smp Numaffut CA6

Niemcy

2001

używany

na żądanie

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Hurco VMX 50

Niemcy

2006

używany

na żądanie

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

Wiertarka słupowa

Webo GRADUA 60

Niemcy

1973

używany

na żądanie

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

Frezarka uniwersalna CNC

Deckel FP4-60

Niemcy

1999

używany

na żądanie

INNO27977

Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible.

Centrum obróbcze profili CNC

Tekna TK 426/3

Niemcy

1998

używany

na żądanie

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

Maszyna CNC do wyciągania rowków

Balzat 32/300

Niemcy

1991

używany

na żądanie

INNO27947

Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.

Maszyna CNC do erodowania drutu

Matra-fanuc TAPE-CUT-W1

Niemcy

nieznany

używany

na żądanie

INNO27939

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

Szlifierka powierzchniowa

Ziersch Gmbh ZT 820

Niemcy

2008

używany

na żądanie

INNO27936

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

Prasa hydrauliczna

Lauffer RPT 68

Niemcy

1987

używany

na żądanie

INNO27919

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

Nożyce gilotynowe

Georg Eckart

Niemcy

1990

używany

na żądanie

INNO27915

An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible.

Centrum obróbcze CNC

Heller MCH 250

Niemcy

2006

używany

na żądanie

INNO27911

Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025.

System cięcia płomieniowego

Esab SUPRAREX SXE-P (D)

Niemcy

1999

używany

na żądanie

INNO27891

Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible.

Spawarka

Heberle/hbs/lorch/mig O Mat/castolin+eutectic cd System 2010/SEW 200N/MIG O MAT WIGSTAR 250i

Niemcy

nieznany

używany

na żądanie

INNO27872

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

Piła tarczowa

Eisele VMSII PV PROD

Niemcy

1982

używany

na żądanie

INNO27868

Saw blade diameter: 275mm, cutting range round (90°): 100mm, cutting range flat (90°): 160mm/80mm, speed: 40rpm - 80rpm. On-site inspection is possible.

Frezarka uniwersalna CNC

Kunzmann WF 4/3

Niemcy

2001

używany

na żądanie

INNO27864

X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000/min, quill stroke: 60mm, max. feed: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not functional, errors occur repeatedly: Problems with the movement monitoring of the Z and Y axes, gross positioning error on the Z axis, faults when moving the control housing. The operational readiness controller is missing and appears continuously when switching on. A reference run is possible after several attempts. The spindle gear is worn out. On-site inspection is possible.

Maszyna CNC do erodowania drutu

Charmilles Robofil 310

Niemcy

nieznany

używany

na żądanie

INNO27862

Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible.

Piła tarczowa

Eisele VMSII-033

Niemcy

1982

używany

na żądanie

INNO27859

Saw blade diameter: 275mm, power: 1.9kW, speed: 80rpm, cutting range (flat): 140mm/70mm, cutting range (miter): 100mm/70mm, max. pipe cutting capacity: 3 inches, solid material cutting capacity: 80mm/60mm, square material cutting capacity: 50mm/50mm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1500mm, weight: approx. 300kg. On-site inspection is possible.

Frezarka narzędziowa

Ipte FUS-32

Niemcy

nieznany

używany

na żądanie

INNO27858

Travel X/Y/Z: 560mm/320mm/400mm, speed: 3600rpm, tool holder: SK40, power: 3kW, table dimensions X/Y: 450mm/950mm, weight: approx. 1650kg. Including various accessories. On-site inspection is possible.