▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [601 - 620 of 980]

Frezarka CNC

Mazak FH 880

Niemcy

1997

używany

na żądanie

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

Wiertarka rzędowa

Elu S156

Niemcy

1976

używany

na żądanie

INNO14814

Number of drilling heads: 4.

Piła taśmowa

Amada HA-250W

Niemcy

2000

używany

na żądanie

INNO27183

Cutting capacity: round material diameter: 10mm-250mm, rectangular material X/Y: 10x10mm-300x250mm, saw blade dimensions X/Y/Z: 27mm/0.9mm/3505mm, saw blade speed: 90m/min, stroke: 400mm, tank capacity: hydraulics: 30l, cooling lubricant: 85l, table height: 700mm, max. workpiece weight: 1500kg. Dimensions X/Y/Z: approx. 2000mm/2400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Tokarka CNC

Monforts RNC 200 A

Niemcy

2000

używany

na żądanie

INNO27182

Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available.

Ciągarnia drutu

Koch KHZ 5000

Niemcy

1993

używany

na żądanie

INNO27180

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of construction: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Including hydraulic unit G13 AK. Documentation available.

Linia do produkcji cewek

Schmitz/psm

Niemcy

2007

używany

na żądanie

INNO27178

A Schmitz/PSM slitting line for sheet metal processing is available. Coil weight: 5t/6t, strip width: 650mm, strip thickness (stainless steel): 0,4mm-1,5mm, coil inner diameter: 400mm/508mm/610mm, coil outer diameter: 1740mm/2000mm, speed: 100m/min, working direction: right(left) / DX - SX. Components: Decoiler with paper winder, deflection rollers, foil device on both sides, strip guiding, strip cutter, scrap winder, recoiler, coil take-up cross, hydraulic units as well as various tools and sanding belts. On-site inspection is possible.

Piec rurowy

Thermconcept ROHT 50/200/17

Niemcy

2018

używany

na żądanie

INNO27169

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

Piec rurowy

Thermconcept ROK 70/500/11

Niemcy

2023

używany

na żądanie

INNO27168

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.

Agregat hydrauliczny

Schenck PP 165BB

Niemcy

1992

używany

na żądanie

INNO27166

Nominal flow rate: 165l/min, max. pressure: 315bar, tank volume: 1m³.

Komora spawalnicza

Heinz/dalex/kuka H200/RC30/52

Niemcy

1995

używany

na żądanie

INNO27165

A welding cell with Kuka robot is available. Robot: nominal payload: 30kg, max. payload: 36kg, reach: 2100mm, number of axes: 6, repeat accuracy: +/-0.06mm. Dalex welding machine: electrode force: 215-1290daN, rated power: 100kvA, throat depth: 250mm, stroke: 200mm, weight: 720kg.

Prasa hydrauliczna

Wmw PYE 63 S/1M

Niemcy

nieznany

używany

na żądanie

INNO27164

Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg.

Hydrauliczna prasa jednokolumnowa

Knuth HRP-150

Niemcy

1996

używany

na żądanie

INNO27163

Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg.

Szlifierka narzędziowa CNC

Anca PGX Grinder

Niemcy

1999

używany

na żądanie

INNO27151

Grinding wheel diameter: 200mm, max. grinding diameter/length: 150mm/760mm, travel X/Y/Z: 760mm/460mm/360mm, swivel range A/C: 270°/360°, speed: 3000rpm. Dimensions X/Y/Z: approx. 2200mm/2100mm/2700mm, weight: approx. 6500kg.

Szlifierka stempli CNC

Anca PGX+

Niemcy

2007

używany

na żądanie

INNO27150

Spindle power: 22kW, grinding wheel diameter: 762mm, grinding wheel speed: 3000rpm, max. punching size: 150mm.

Szlifierka powierzchniowa

Monoprecis 114S

Niemcy

1984

używany

na żądanie

INNO27149

Table size X/Y: 500mm/200mm, max. table load: 200kg, longitudinal movement/transverse movement: 540mm/240mm, table grinding wheel distance: 400mm, grinding wheel size: 180mm/32mm/20mm, speed: 2850rpm. Dimensions X/Y/Z: approx. 1500mm/1100mm/2000mm, weight: approx. 1500kg.

Tokarka CNC

Hardinge SG-42

Niemcy

nieznany

używany

na żądanie

INNO27148

Max. swing diameter over bed: 540mm, max. turning diameter: 240mm, max. machining length: 330mm, traverse path: X/Y: 135mm/350, spindle bore: 40mm, speed: 4400rpm. Tool positions: 12, max. tool size square/round: 19mm/31mm, chuck size: 152mm, traversing speed X/Z: 12/16 m/min. Dimensions X/Y/: approx. 2200mm/1700mm/1700mm, weight: approx. 3600kg, control: GE Fanuc 18T.

Szlifierka do otworów

Overbeck Zetto 30

Niemcy

1986

używany

na żądanie

INNO27147

Center height: 80mm, sanding length: 120mm, jaw chuck diameter: 125mm, max. sanding diameter: 80mm.

Maszyna do wykrawania i gięcia

Bihler GRM-50

Niemcy

1979

używany

na żądanie

INNO24616

Three Bihler GRM-50 are available, year of manufacture: 2x 1979, 1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg.

Tokarka tarczowa

Ravensburg PKZ 20

Niemcy

1963

używany

na żądanie

INNO27109

Center height: 930mm, center width: 3000mm, turning diameter over faceplate/bed: 2200mm/1700mm, max. workpiece weight in the chuck holder/in the centers: 3000kg/8000kg, spindle bore: 80mm, faceplate speed: 180rpm, dimensions X/Y/Z: approx. 4000mm/1500mm/1800mm, weight: approx. 24000kg. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Eht EHPS 20-35

Niemcy

1995

używany

na żądanie

INNO27107

Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.