▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [41 - 60 of 1013]

Maszyna odśrodkowa talerzowa

Otec CF2x18

Niemcy

2023

używany

na żądanie

INNO29816

Basic equipment: thermally cross-linked wear-resistant PU working container lining (profiled), rotary table with flow-optimized carrier bars for sensitive workpieces, complete water drainage via stainless steel hollow shaft for wet processing, high-precision bearing of the rotary table (with corrosion-resistant ceramic sealing system for wet processing), 2x drive motor 0.9kVA with thermal protection, machine frame in steel construction. Control of the machining process via PLC with display of processing time, table speed, compound dosing, start delay, process interruption and operating hours, setting of time and speed parameters via touchscreen, start/stop buttons for program sequence, storage of 500 machining programs, table speed control via frequency converter, main switch/reset switch, with signal light green/yellow/red, with USB interface. 2x working containers each with 18l container volume, container inner diameter: 330mm. Operating voltage: 230/400V (slip gap operation), 50/60Hz, VS max. 16A, control voltage: 24V, protection class: IP 54, color: RAL7012 basalt grey and RAL7035 light grey, containers in RAL 5002, standards: VDE, UVV, CE, control cabinet with touchscreen CF 2x18 ZGZG, control: S7/1200, 2x working containers CF 18 ZG round ribs + PU-R, ceramic ring, for gapless operation of the working container during wet processing, 2x lids for working container CF 18 wet, water connection without valve, CF-9/18, connection diameter: 13mm, for removal of dirt particles from fresh water and circulation, longer service life for flow meter, 2x dosing unit WZG 2 CF 9/18, compound drawer 1 CF - 9/18, extension without hand sieves CF 2x18. Connected load: 2kVA, weight: 330kg. With documentation, without accessories. An on-site inspection is possible.

Maszyna do erozji iskrowej

Wagner Maschinen DM-323

Niemcy

1988

używany

na żądanie

INNO29811

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.

Tokarka

Meuser M1 P

Niemcy

nieznany

używany

na żądanie

INNO29809

Speed: 45-1800/min, the machine is functional. An on-site inspection is possible.

Tokarka CNC

Gildemeister NEF 400

Niemcy

2006

używany

na żądanie

INNO29808

Max. spindle speed: 4000/min, connected load: 21kVA, control: Siemens Sinumerik 840D, length: 2100mm, width: 1750mm, height: 1710mm, weight: 2.8t. With chip conveyor, internal cooling and manually movable tailstock, without turret. The machine requires an overhaul. An on-site inspection is possible.

Urządzenie odśrodkowe

Walther Trowal TT 90-A/2C-V9

Niemcy

2018

używany

na żądanie

INNO29802

Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible.

Maszyna CNC do erodowania drutu

Charmilles Technologies Robofil 6000

Niemcy

1990

używany

na żądanie

INNO29801

With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible.

Tokarka

Tislar TIS-140 NP

Niemcy

2000

używany

na żądanie

INNO29796

Rated current: 16A, rated fuse current: 16A, control voltage: 24V, rotational speed: 63-4500/min, connected load: 2.5/3kW, control panel: RATIONAL, weight: 1.05t. With digital display: rational 3-axis display (X, Y, Z) for precise position reading, headstock: conventional drive with change gears for thread cutting, tailstock: manually movable with handwheel, support: top slide and cross slide, manually operable, emergency stop and operating elements. An on-site inspection is possible.

Frezarka do gwintów

Mikron 132.02

Niemcy

nieznany

używany

na żądanie

INNO29795

Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.

Centrum tokarsko-frezarskie z podwójnym wrzecionem CNC

Spinner TTS 65-DUPLEX

Niemcy

2020

używany

na żądanie

INNO29791

X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: 6000/min, i=1:1, raised design with center distance 85mm, 1x cut-off holder, rotation direction universal, external coolant. Regularly maintained, maintenance records available, an on-site inspection is possible.

Maszyna do erodowania drutu

Agie AGIECUT 220

Niemcy

1995

używany

na żądanie

INNO29790

X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible.

Szlifierka powierzchniowa

Elb-schliff SWBD10 VAII-U

Niemcy

1967

używany

na żądanie

INNO29789

Max. grinding length: 1000mm, max. grinding width: 500mm, max. working height: 540mm, grinding spindle slide stroke vertical/ horizontal: 465/ 500mm, swiveling range: 1800°, table clamping surface: 1500/450mm, clamping slots number: 3, clamping slots distance: 125mm, clamping slots width: 16H7mm, table cross travel: 500mm, table longitudinal travel: 1000mm. Length: 4650mm, width: 2600mm, height: 2850mm, weight: 7.1t. With machine card. The electronics were renewed in 2022. An on-site inspection is possible.

Maszyna do odlewania ciśnieniowego

Urpemak CC 50

Niemcy

2006

używany

na żądanie

INNO29767

A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible.

Obrotowa maszyna transferowa

Stöferle WeMa RTZ-8-Stationen

Niemcy

2012

używany

na żądanie

INNO29763

A special-purpose rotary transfer machine for aluminum processing, rebuilt by Stöferle, is available. 1) Complete machine, connected load: 120kW, hydraulic pressure: 50bar, pneumatic pressure: 6bar, transport width: approx. 2600mm, stations: 8, machine dimensions X/Y/Z: approx. 3000mm/2600mm/2800mm, weight: approx. 9500kg. 2) Coolant system Knoll with scraper belt conveyor, year of manufacture: 2010. 3) Hydraulic system Hydropa. 4) Pneumatic system Festo. 5) Central lubrication system ALS. Documentation available. An on-site inspection is possible.

Strugarka

Waldrich 30

Niemcy

nieznany

używany

na żądanie

INNO29762

An old plano milling machine (guideway grinding machine) Waldrich Coburg is available. Bed length: 5500mm, bed width: 750mm, machine dimensions X/Y/Z: approx. 12000mm/300mm/3000mm, weight: approx. 37500kg. An on-site inspection is possible.

Tokarka CNC 4-osiowa

Okuma LU300-2ST 350

Niemcy

2005

używany

na żądanie

INNO29761

A CNC 4-axis lathe Okuma including a conventional external cylindrical grinding machine TOS BUAJ 28 is available. 1) Lathe, year of manufacture: 2005, turret: 2-disc turret, tool positions: 12/8, tool holder: VDI40, speed: 3800rpm, turning diameter: 370mm/530mm, turning length: 600mm, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2200mm, weight: approx. 6800kg, control: Okuma OST E100L. Includes clamping device design, part catcher, part conveyor, and chip conveyor. Without tailstock, bar loader, spindle reduction, and VDI holders. 2) TOS, year of manufacture: 1988, max. grinding diameter: 280mm, center height: 140mm, distance between centers: 630mm, max. workpiece weight: 120kg, headstock: MT4, workpiece spindle swivel range: +/-90°, grinding head swivel range: +/-45°, grinding wheel dimensions X/Y/Z: 400mm/40mm/127mm, speed: 2560rpm, feed rate: 7m/min. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/1500mm, weight: approx. 2000kg. Includes accessories and grinding wheels. Documentation available. An on-site inspection is possible.

Maszyna do szlifowania boków zębów

Reishauer RZ 362

Niemcy

2018

używany

na żądanie

INNO29757

A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.

Warsztatowa wytaczarka

Wotan B-105-S

Niemcy

nieznany

używany

na żądanie

INNO29753

Spindle diameter: 90mm, boring spindle longitudinal adjustment: 700mm, spindle head vertical adjustment: 1250mm, speed: 1000rpm, rapid traverse: 2600mm/min. Table swivel range: 360°, table clamping surface X/Y: 1100mm/1400mm, table cross travel: 1800mm, table longitudinal travel: 1250mm, max. table load: 4000kg, bed dimensions X/Y: 3380mm/1800mm. Machine dimensions X/Y/Z: approx. 4650mm/3900mm/3000mm. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi CNC

Darley MF 2502

Niemcy

2000

używany

na żądanie

INNO29752

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.

Piła taśmowa

Kasto Twin A 4x5

Niemcy

2014

używany

na żądanie

INNO29747

Cutting range round material: 440mm, cutting range flat material: 520mm/440mm, min. cut length: 6mm, min. cut width and height: 10mm/10mm, automatic mode – remnant length: 85mm, single feed: 800mm, cutting speed: 150m/min, saw band dimensions X/Y/Z: 5700mm/41mm/1.3mm, material support height: 700mm. Machine dimensions X/Y/Z: approx. 2200mm/2950mm/2100mm, weight: approx. 3000kg. Includes chip conveyor, coolant system, minimum quantity lubrication system, vertical roller, and 2x short roller conveyors. Documentation available. An on-site inspection is possible.

Piła taśmowa

Kasto pos A3

Niemcy

2002

używany

na żądanie

INNO29746

Cutting range: 320mm, short roller conveyor: 1000mm, roller conveyor: 2000mm, chip conveyor: 800mm, weight: 1750kg. Documentation available. An on-site inspection is possible.