▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [481 - 500 of 980]

Tokarka

Wmw DLZ 630 IV x2000

Niemcy

1983

używany

na żądanie

INNO28026

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

Przeciągarka szczelinowa

Hahndor REWK 86/14

Niemcy

2007

używany

na żądanie

INNO28025

A Hahndorf grooving and broaching machine is available. Grooving: Stroke min./max.: 80mm/300mm, max. groove width: 34mm. Joint length: max. joint length: 300mm. Broaching: max. groove width: 14mm, max. broaching tool length: 640mm. Cutting speed forward/reverse: 3m/min, machine weight: approx. 300kg. Including various tools and accessories. Documentation available. On-site inspection is possible.

Szlifierka narzędziowa CNC

Smp Numaffut CA6

Niemcy

2001

używany

na żądanie

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Hurco VMX 50

Niemcy

2006

używany

na żądanie

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

Wiertarka słupowa

Webo GRADUA 60

Niemcy

1973

używany

na żądanie

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

NC-pudrowa lakiernia

Wma Warsteiner Montage Und Anlagentechnik

Niemcy

2003

używany

na żądanie

INNO27978

Three-chamber pre-treatment dimensions: 3600x1200x1900mm, washing entrance dimensions: 700x1500mm, manual painting booth dimensions: 800x1700mm, cycle time: 6min. With residual moisture dryer, Gema Optiflex 2 powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible. Available in February 2025.

Frezarka uniwersalna CNC

Deckel FP4-60

Niemcy

1999

używany

na żądanie

INNO27977

Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible.

Centrum obróbcze profili CNC

Tekna TK 426/3

Niemcy

1998

używany

na żądanie

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

Prasa

Gechter/burger SEM 70kN/DO 3

Niemcy

1990

używany

na żądanie

INNO27970

Two presses from different manufacturers are available. 1) Gechter SEM 70 KN, year of manufacture: 1990, pressing force: 70kN, type: knuckle-joint press, stroke: 5mm-62mm, max. installation height: 295mm, throat depth: 160mm, weight: approx. 350kg. 2) Two-stroke press Burger DO 3, pressing force: 3t, stroke rate: 80/min, throat: 140mm, stroke: 40mm, table dimensions X/Y: 280mm/380mm, working height: 810mm, ram surface: 115mm/100mm, machine dimensions X/Y/Z: approx. 800mm/1000mm/1400mm, weight: approx. 250kg. On-site inspection is possible.

Prasa do gięcia krawędzi

Zlatokov Pmp Trenčín LODD 200

Niemcy

1982

używany

na żądanie

INNO27956

Pressing force: 1961kN, working width: 4000mm, table width: 200mm, working height: 800mm, stroke rate: 28/min, clear width: 3450mm, motor power: 22kW, length: 4420mm, width: 2060mm, height: 3800mm, weight: 22.66t. With comprehensive documentation, machine with age-related signs of use and wear, associated dies and matrices in usable but heavily worn condition. On-site inspection possible.

Maszyna CNC do wyciągania rowków

Balzat 32/300

Niemcy

1991

używany

na żądanie

INNO27947

Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.

Tokarka centralna

Weiler Primus-LZ GRF

Niemcy

1978

używany

na żądanie

INNO27944

A barely used Weiler precision lead and feed spindle lathe is available. Turning diameter over bed/slide: 250mm/180mm, turning length: 450mm, spindle clearance: 23mm-24mm, speed: 3000rpm, drive power: 1.5kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 600kg. Including accessories. On-site inspection is possible.

Frezarka uniwersalna

Misal 765/C

Niemcy

1984

używany

na żądanie

INNO27941

Travel X/Y/Z: 1270mm/660mm/530mm, feed X/Y/Z: 1500mm/1500mm/54mm/min, rapid traverse X/Y/Z: 2500mm/2500mm/750mm, spindle power: 9.2kW, speed: 1420rpm, spindle taper: NST 50, table dimensions X/Y: 1700mm/500mm. Documentation available. On-site inspection is possible.

Tokarka centralna

Nardini SAGAZ SZ 250 T

Niemcy

1990

używany

na żądanie

INNO27940

Center width: 1500mm, center height: 250mm, turning diameter over bed/offset/over facing slide: 500mm/710mm/305mm, bed width: 340mm, spindle bore: 80mm, spindle diameter: 95mm, speed: 1500rpm. Stroke of face slide/top support: 300mm/170mm, top support swivel range: +/-45°, tailstock quill: 80mm, quill stroke: 205mm, motor power: 9kW. Machine dimensions X/Y/Z: approx. 3000mm/1400mm/1650mm, weight: approx. 2700kg. Documentation available. On-site inspection is possible.

Maszyna CNC do erodowania drutu

Matra-fanuc TAPE-CUT-W1

Niemcy

nieznany

używany

na żądanie

INNO27939

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

Szlifierka powierzchniowa

Ziersch Gmbh ZT 820

Niemcy

2008

używany

na żądanie

INNO27936

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

Prasa hydrauliczna

Lauffer RPT 68

Niemcy

1987

używany

na żądanie

INNO27919

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

Tokarka CNC

Gildemeister CTX 400

Niemcy

1992

używany

na żądanie

INNO27918

Travel X/Z: 210mm/640mm, spindle head diameter in front bearing: 100mm, spindle diameter: 72mm, spindle speed: 5000rpm, turning diameter over bed/support: 500mm/290mm, turning length: 600mm, spindle power: 22kW, max. torque: 263Nm, tool turret: 12, fast travel X/Z: 10m/15m/min, chuck diameter: 200mm. Machine dimensions X/Y/Z: approx. 4600mm/2000mm/1800mm, weight: approx. 5300kg. Documentation available. On-site inspection is possible. The function of the machine is limited, as the buffer battery on the control unit is probably empty.

Frezarka uniwersalna CNC

Maho MH 500 E2

Niemcy

1989

używany

na żądanie

INNO27917

Travel X/Y/Z: 500mm/400mm/350mm, rapid traverse: 4m/min, spindle speed: 5000rpm, spindle mount: SK40, max. table load: 200kg, table dimensions X/Y: 800mm/360mm. Machine dimensions X/Y/Z: approx. 2200mm/2200mm/1900mm, weight: approx. 2000kg, control: CNC 452, operating hours: 8660h. On-site inspection is possible. The function of the machine is limited, as the buffer battery on the control unit is probably empty.

Nożyce gilotynowe

Georg Eckart

Niemcy

1990

używany

na żądanie

INNO27915

An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible.