▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [21 - 40 of 976]

Szlifierka taśmowa

Grindingmaster MCSB/B2-900

Niemcy

1984

używany

na żądanie

INNO29580

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

Prasa do gięcia krawędzi

Hämmerle AP 200-2600

Niemcy

1991

używany

na żądanie

INNO29579

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

System czyszczący

Zippel REMA K1-1500-BA-SO

Niemcy

1988

używany

na żądanie

INNO29578

A Zippel single-chamber cleaning system is available. Number of containers: 2, container volume: 300l, usable volume: 600l, usable height: 850mm. On-site inspection is possible.

Szlifierka powierzchniowa

Diskus DWH 1600/3000/ So

Niemcy

1972

używany

na żądanie

INNO29577

A horizontal double-sided face and surface grinding machine Diskus is available. Grinding wheel diameter: 600mm, grinding wheel width: 150mm, workpiece dimensions X/Y: 1600mm/3000mm, machine dimensions X/Y/Z: approx. 5000mm/5000mm/3000mm, weight: approx. 11000kg. Documentation available. On-site inspection is possible.

Portalowa przecinarka płomieniowa CNC

Esab Combirex DX-4000

Niemcy

2015

używany

na żądanie

INNO29576

A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible.

Frezarka CNC

Avia FNE 40 Z

Niemcy

2007

używany

na żądanie

INNO29573

Travel X/Y/Z: 620mm/420mm/400mm, table dimensions X/Y: 800mm/400mm, max. table load: 400kg, quill stroke: 80mm, tool holder: SK40, speed: 4000rpm, feed X/Y/Z: 8m/8m/6m/min, rapid traverse X/Y/Z: 8m/8m/6m/min. Machine dimensions X/Y/Z: approx. 2600mm/2000mm/2000mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. On-site inspection is possible.

Wykrawarka

Raster/kemmerich/alba HR 60/500 NL

Niemcy

nieznany

używany

na żądanie

INNO29567

A complete punching system with a grid punch is available. 1) Reel Gebrüder Kemmerich 7VID, year of manufacture: 1981, max. load: 1000kg. 2) Straightening machine, max. material width: 300mm, max. material thickness: 2mm. 3) Feed unit Alba UVHY 300/0.1, feed speed: 6.5m/min, max. material width: 300mm, max. material thickness: 4mm, transport rollers: 2. 4) Punching grid HR 50/600 NL, stroke rate: 300/min, stroke: 30mm-80mm. On-site inspection is possible.

Wykrawarka

Raster/alba/cis HR 80/700 NL

Niemcy

1992

używany

na żądanie

INNO29566

A complete punching system with a grid punch is available. 1) Double reversible decoiler, load capacity: 1000kg. 2) Alba GGVHY 200 straightening machine, year of manufacture: 1992, feed rate: 6.5m/min, max. material width: 200mm, max. material thickness: 4mm, transport rollers: 2. 3) Alba MA RIA 7 feed, year of manufacture: 1978, max. material width: 300mm, max. material thickness: 3mm, feed rate: 40m/min, control: Siemens S7. Material thickness: 3mm, feed speed: 40m/min, control: Siemens S7 with OP7. 4) Punching machine Raster HR 80/700 NL, year of manufacture: 1992, pressing force: 80t, stroke rate: 250/min, table dimensions X/Y: 730mm/750mm, ram dimensions X/Y: 730mm/630mm, ram stroke: 40mm, ram adjustment: 80mm. 5) Profiling machine CIS. Documentation available. On-site inspection is possible.

System cięcia

Schleicher H-B4-1250/RM 8-53-160/HSKW-SF

Niemcy

1993

używany

na żądanie

INNO29565

A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible.

Frezarka portalowa CNC

Fkd FFZ 30/60 CNC

Niemcy

nieznany

używany

na żądanie

INNO29562

A CNC portal milling machine FKD-Feichter with 2 columns is available. Travel X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115000kg, max. table surface load: 6400kg/m², total machine bed length: 14500mm, portal dimensions X/Y: 3000mm/4400mm, C-axis: 360°, A-axis: +/-120°, ram cross-section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15100mm/6100mm/7000mm, total system weight: approx. 115000kg, control: Heidenhain. Including chip protection, cooling lubricant system and hydraulic unit. The machine was built at the site in 2022. The ram and spindle are currently being overhauled. Documentation available. On-site inspection is possible. Expected to be available from September 2025.

Maszyna do erodowania drutu

Huber OCT-3525ZA

Niemcy

2008

używany

na żądanie

INNO29560

A ZNC Huber start hole drilling machine is available. Travel X/Y/Z: 350mm/250mm/350mm, electrode diameter range: 0.1mm-3mm, max. workpiece weight: 250kg, machine dimensions X/Y/Z: approx. 1100mm/1000mm/2000mm, weight: approx. 800kg, control: ZNC Drill EDM. Documentation available. On-site inspection is possible.

Zgrzewarka punktowa

Nimak/imp. Physik PMP 3-35/PMP 3-16/400-4600

Niemcy

1983

używany

na żądanie

INNO29557

Two spot welding machines and one impulse welding machine are available. 1) Spot welding machine Nimak PMP 3/35, rated power at 50% ED: 35kVA, max. welding power: 3mm+3mm, throat depth: approx. 520mm, opening width: 250mm, electrode depth: 70mm, electrode force: 600N, electrode arm/holder: 60mm/30mm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. 2) Spot welding machine Nimak PMP 3/16, year of manufacture: 1983, welding capacity: 2mm+2mm, rated power at 50% ED: 16kVA, electrode force: 300N, throat depth: 520mm, electrode stroke: 70mm. 3) Impulse welding machine Imp. physics. On-site inspection is possible.

Frezarka CNC

Reckermann Delta 1300 Kombi

Niemcy

1992

używany

na żądanie

INNO29553

A CNC double-spindle milling machine Reckermann with one horizontal and one vertical spindle is available. Travel X/Y/Z: 1000mm/400mm/450mm, table dimensions X/Y: 1300mm/400mm, max. table load: 2000kg, spindle mount: SK40, spindle speed: 3600rpm, torque: 2130Nm, quill stroke: 120mm, feed: 6m/min, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 5500mm/4100mm/2500mm, weight: approx. 6000kg, control: Heidenhain TNC 135. An on-site inspection is possible.

Tokarka CNC

Gildemeister NEF 560

Niemcy

1985

używany

na żądanie

INNO29552

Turning diameter over bed/face slide: 560mm/250mm, spindle bore: 65.3mm, chuck diameter: 250mm, torque: 1680Nm, speed: 2240rpm, feed X/Z: 8m/5m/min, rapid traverse X/Z: 8m/5m/min, spindle diameter: 110mm, center height: 272mm, bed width: 360mm, slide width: 225mm, slide length: 902mm, center width: 1000mm, quill diameter: 100mm. Machine dimensions X/Y/Z: approx. 3750mm/4050mm/1800mm, control: Heidenhain EPL 1, operating hours: 80607h. Documentation available. On-site inspection is possible.

Tokarka CNC

Okuma LR 25

Niemcy

1988

używany

na żądanie

INNO29551

Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible.

Frezarka narzędziowa CNC

Avia FNE-50N

Niemcy

1998

używany

na żądanie

INNO29547

Travel X/Y/Z: 800mm/500mm/420mm, table dimensions X/Y: 1000mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 4000rpm, feed: 2m/min, rapid traverse: 5m/min, quill stroke: 100mm, swivel: +/-45°. Machine dimensions X/Y/Z: approx. 3000mm/2500mm/2000mm, weight: approx. 3000kg, control: Heidenhain TNC 410, documentation available. On-site inspection is possible.

Prasa ekscentryczna

Knuth KEX 10

Niemcy

2003

używany

na żądanie

INNO29540

Single stroke: 100/min, continuous stroke: 200/min, ram table top distance: 180mm, working area depth: 150mm, table top dimensions X/Y: 370mm/270mm, stroke: 10mm/40mm, hole diameter: 25mm, weight: approx. 530kg. On-site inspection is possible.

Jednokolumnowa prasa ekscentryczna

Weingarten/mabu E 40w/3 TF

Niemcy

1963

używany

na żądanie

INNO29539

Two older Weingarten and MABU single-column eccentric presses are available. 1) Weingarten E 40w, year of manufacture: 1963, press force: 40t, max. sheet thickness: 4mm, stroke rate: 145/min, slide stroke: 8mm-88mm, slide adjustment: 63mm. 2) Maschinenfabrik Karl Burkard 3TF, year of manufacture: 1963, press force: 3t, slide stroke: 6mm-34mm, stroke rate: 220/min, slide adjustment: 28mm. On-site inspection is possible.

Tokarka uniwersalna CNC

Traub TNA 480

Niemcy

1983

używany

na żądanie

INNO29529

Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Trumpf TruLaser 3030

Niemcy

2011

używany

na żądanie

INNO29527

Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible.