▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [361 - 380 of 1001]

Tokarka centralna

Meuser M2L

Niemcy

nieznany

używany

na żądanie

INNO28750

Center height over bed/face slide: 230mm/135mm, turning diameter over bed/face slide: 460mm/270mm, spindle bore: 62mm, quill diameter: 70mm, feed: feed X/Z: 10.4mm/2.64mm/rev, threaded hole: 76mm, max. workpiece weight without/1/2 steady rest/s: 1000kg/1300kg/1600kg. On-site inspection is possible.

Maszyna do nawijania płaskiego drutu

Lju SWM2010

Niemcy

2011

używany

na żądanie

INNO28748

A fully automated winding machine for wire processing is available.Winding capacity (depending on the number of turns):approx. 120 coils/h, wire thickness: 5x1mm/15x55mm, inner diameter: 23mm-66mm, max. spool weight: 7kg, machine dimensions X/Y/Z: approx. 5000mm/2500mm/2000mm, operating hours (still in use until the end of April): approx. 16625h.Units: 6-fold wire uncoiler, wire straightening unit, milling unit, coiling, cutting and ejection system.Product materials: enameled copper wires and insulating materials without dust or adhesive residues.Documentation available.On-site inspection is possible.

Frezarka CNC

Eas EAS(Y) 600

Niemcy

2020

używany

na żądanie

INNO28747

Travel X/Y/Z: 1000mm/600mm/155mm, table dimensions X/Y: 1200mm/600mm, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, max. speed: 90mm/s, control: ECO Control. Including tool length sensor, milling spindle Mafell FM 1000, milling cutter assortment, mounting material and protective housing. Documentation available. On-site inspection is possible.

Frezarka wspornikowa

Reckermann Delta 1300 Kombi

Niemcy

1994

używany

na żądanie

INNO28743

A Rackermann double-spindle milling machine (horizontal and vertical) is available. Travel X/Y/Z: 1000mm/370mm/450mm, table dimensions X/Y: 1300mm/400mm. Horizontal: Tool holder: SK40, max. tool diameter: 250mm, milling spindle swivel range: +/-90°, quill adjustment: 120mm, spindle diameter: 60mm, speed: 2100rpm. Vertical: Tool holder: SK40, max. tool diameter: 280mm, spindle diameter: 90mm, speed: 1400rpm. Feed X/Y/Z: 4m/min, feed force X/Y/Z: 10kN/10kN/30kN, rapid traverse X/Y/Z: 5m/min. Machine dimensions X/Y/Z: approx. 5500mm/4100mm/2500mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible.

Centrum obróbcze laserowe CNC

Trumpf Lasma 1054

Niemcy

2006

używany

na żądanie

INNO28741

A Trumpf CNC laser machining center is available. Travel X/Y/Z: 1000mm/5000mm/400mm, laser type: HL383D, laser power: 300W, wavelength: 120µm, collimation: F150, optics: standard D100, operating hours: approx. 9000h, laser hours: 7500h. Including replacement cube D70, welding optics D70, new arc lamps and replacement filters. Documentation available. On-site inspection is possible.

3-osiowa frezarka pionowa

Mikron VCE 600 PRO

Niemcy

2019

używany

na żądanie

INNO26330

X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.

Piła tarczowa ukośna

Kaltenbach SKL 450

Niemcy

2010

używany

na żądanie

INNO28740

Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Piec przemysłowy

Memmert UF 450

Niemcy

2017

używany

na żądanie

INNO28737

Five identical temperature control ovens are available. Temperature: 300°C, temperature accuracy at 150°C: +/-0.5K, volume: 449l, shelf load: 30kg, total load: 300kg, internal dimensions X/Y/Z: approx. 560mm/720mm/1050mm, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 710mm/900mm/1200mm. Documentation available. On-site inspection is possible.

Pozostałe zapasy

Troma/glaser/renard

Niemcy

nieznany

używany

na żądanie

INNO28736

Various machines and peripheral equipment for metalworking are available. 1) Troma TC 300. 2) Sigloch and Schrieder Boromat 14 4. 3) Glaser. 4) Renard DM1-R. On-site inspection is possible.

Tokarka pionowa CNC

Diedesheim Vertifront S-70

Niemcy

1994

używany

na żądanie

INNO28735

Tool swing circle diameter: 1100mm, travel X/Z: 630mm/630mm, spindle bore: 66mm, flange diameter: 380mm, spindle upper edge: 960mm, headstock bearing diameter: 240mm, feed: 18m/min, rapid traverse: 10m/min, speed: 2240rpm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/3500mm, weight: approx. 14000kg, control: Siemens. Documentation available. On-site inspection is possible.

Nożyce gilotynowe

Schröder MHSU-V 2500/3

Niemcy

2000

używany

na żądanie

INNO28720

Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible.

Szlifierka pił

Wmw/werkö SWSK 1450-SPS/SWSK 1450

Niemcy

1994

używany

na żądanie

INNO28718

A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Junker Lean Selection Allround

Niemcy

2014

używany

na żądanie

INNO28716

A Junker CNC universal external and internal cylindrical grinding machine is available. Grinding diameter: 290mm, grinding length: 800mm, center height: 150mm, max. workpiece weight: 80kg. Grinding length left/right: 800mm/340mm, grinding wheel diameter: 290mm, grinding wheel width: 63mm, grinding wheel bore: 127mm, peripheral speed: 45m/s. Measuring device tec: Diameter measuring range: 1mm, measuring accuracy: 0.5µm, length measuring range: +/-2mm, measuring accuracy: 0.5µm. Machine dimensions X/Y/Z: approx. 3400mm/2500mm/2700mm, weight: approx. 8000kg, control: Fanuc IO-TD, operating hours: approx. 7847h. Documentation available. On-site inspection is possible.

Automatyczna tokarka rewolwerowa

Gdw RD 250 S

Niemcy

2000

używany

na żądanie

INNO28715

Center height: 125mm, center width: 400mm, orbital diameter over bed/face slide: 260mm/128mm, spindle bore: 38mm, speed: 3000rpm, chuck diameter: 125mm, turret slide travel: 100mm, grooving slide travel: 90mm. Documentation available. On-site inspection is possible.

Szlifierka powierzchniowa

Jung JF 520 E-1

Niemcy

1989

używany

na żądanie

INNO28714

Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnet dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center-to-table distance: 350mm (+/-50mm), table feed: 20m/min, creep speed: 0mm/500mm/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible.

Szlifierka do powierzchni CNC

Jung JC 500 CNC-C

Niemcy

1994

używany

na żądanie

INNO28713

Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible.

Centrum obróbcze CNC

Dmg DMC 60 T RS3

Niemcy

2008

używany

na żądanie

INNO28712

A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain MillPlus IT, operating hours: 42603h, spindle hours: 20137h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Dmg DMC 60 T RS3

Niemcy

2004

używany

na żądanie

INNO28711

A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain iTNC 530, operating hours: 62659h, spindle hours: 38299h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible.

Tokarka CNC

Müga XP4-42 SM

Niemcy

2008

używany

na żądanie

INNO28707

A CNC 6-axis precision lathe Müga is available. Axes: 6, turning length: 100mm, swing diameter: 560mm, rapid traverse: 17.5m/min, speed: 4000rpm, spindle power: 7.5kW, spindle clearance: 42mm, tool positions: 27, drive tools: 9. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/1800mm, control: Pentium-PC, weight: approx. 3000kg, spindle hours: 29556h. Bar feeder dimensions X/Y/Z: approx. 4000mm/500mm/1300mm, weight: approx. 800kg. Including bar loading magazine BFG-42.3 M. The tool tower is in dismantled condition and the Y and X axes of the ball screw are defective. Documentation available. On-site inspection is possible.

Tokarka dwuwrzecionowa CNC

Emxo MAXXTURN 65 SMY 1

Niemcy

2007

używany

na żądanie

INNO28706

Turning diameter: 320mm, turning length: 510mm, bar capacity: 65mm, traverse path X/Z: 260mm/610mm, traverse path Y: +/-40mm, speed: 5000rpm, counter spindle speed: 7000rpm, tool positions: 12, tool holder: VDI30, tool speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2100mm, weight: approx. 5700kg, control: Siemens Sinumerik 840D PCU20, operating hours: 89129h. Both spindles are no longer functional due to oxidized cooling channels. The cooling connections and control card have been removed for X1 and Z1. Documentation available. On-site inspection is possible.