▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [301 - 320 of 974]

Frezarka kolumnowa sterowana numerycznie

Matec 30 HV

Niemcy

2003

używany

na żądanie

INNO28593

Travel X/Y/Z: 3000mm/800mm/1100mm, rapid traverse X/Y/Z: 30m/min, feed X/Y/Z: 30m/min, spindle type: DMS 112, speed: 12000rpm, power: 30kW, torque: 190Nm, tool holder: HSK 63 A, tool positions: 48. Drilling capacity steel: approx. 60mm, milling capacity: approx. 500cm³, tapping capacity: M30, head tilt: +/-90°, table dimensions X/Y: 3500mm/835mm, face plate diameter: 630mm. Machine dimensions X/Y/Z: approx. 7000mm/6000mm/4000mm, weight: approx. 15000kg, control: Bosch type 3 Osa. Including 70bar internal coolant supply, chip conveyor, loading doors for crane loading, 3D radio measuring probe, direct measuring systems for X/Y/Z, cooling unit and other accessories. Documentation available. On-site inspection is possible.

Wiertarka

Alzmetall Abomat 30

Niemcy

1982

używany

na żądanie

INNO28592

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

Szlifierki do wałków

Studer RHU 1000/125-DR

Niemcy

1979

używany

na żądanie

INNO28591

Center height: 125mm, center width: 1025mm, longitudinal slide travel: 1020mm, table speed: 5.5m/min, rotary table tilt: 8°, workhead swivel: 90°, speed: 675rpm, 3-jaw chuck diameter: 160mm. Documentation available. On-site inspection is possible.

Piła taśmowa

Mep Shark 281

Niemcy

nieznany

używany

na żądanie

INNO28590

Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.

Odciąg oparów spawalniczych

Teka Filtercube 4H

Niemcy

2014

używany

na żądanie

INNO28589

Motor power: 7.5kW, air volume flow: 8000m³/h, negative pressure: 4600Pa, filter area: 100m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 800mm/900mm/3200mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Bystronic ByStar Fiber 10kW

Niemcy

2017

używany

na żądanie

INNO28587

Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

Automatyczna prasa wykrawająca

Raster HR 60/700 NL-4S

Niemcy

1981

używany

na żądanie

INNO28585

Press force: 600kN, accuracy: 0.1mm, stroke rate: 300 strokes/min, feed: 150mm, clamping plate dimensions X/Y: 650mm/420mm, opening dimensions X/Y: 550mm/120mm, tool installation height min./max.: 190mm/350mm, weight: approx. 8000kg. Without coil and straightening unit. In continuous operation, the machine switches off after 1-2 strokes. Documentation available. On-site inspection is possible.

Szlifierka do wierteł

Haarmann HSP 50

Niemcy

1978

używany

na żądanie

INNO27511

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

Piła taśmowa

Jaespa Concept 260/630S

Niemcy

2010

używany

na żądanie

INNO28582

Motor power: 4kW, cutting speed: 15m-90m/min, saw blade dimensions X/Y/Z: 5150mm/13mm/0.9mm, saw blade type: M42/4ZpZ, material support height: 720mm, angle: +/-30°, machine dimensions X/Y/Z: approx. 2850mm/1400mm/1850mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Frezarka narzędziowa CNC

Mikron WF 31D/TNC355

Niemcy

1990

używany

na żądanie

INNO28580

Travel X/Y/Z: 560mm/500mm/400mm, feed X/Y/Z: 3m/min, table dimensions X/Y: 900mm/530mm, tool holder: ISO40, speed: 4000rpm, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2200mm, weight: approx. 2600kg, control: Heidenhain TNC 355, operating hours: 57765h. Including 3D probe, 20x holders, spray protection cabin and coolant pump. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC z kolumną ruchomą

Soraluce FL 6000

Niemcy

2011

używany

na żądanie

INNO28578

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

Wytaczarka panelowa CNC

Union BFP 130/7

Niemcy

1992

używany

na żądanie

INNO28577

A Union horizontal drilling and milling machine overhauled in 2009 is available. Spindle diameter: 130mm, tool holder: ISO30, travel X/Y: 11500mm/3000mm, column movement Z: 420mm, drilling spindle movement W: 900mm, facing slide movement U: 320mm, spindle speed: 1000rpm, face support speed: 250rpm. Feed in all axes: 2500mm/min, rapid traverse X/Y: 5000mm/min, rapid traverse Z: 3600mm/min, rapid traverse W/U: 3150mm/min, connected load: 100kW, spindle power: 50kW. Machine dimensions X/Y/Z: approx. 17000mm/3000mm/6500mm, total system weight: approx. 60t, control system: PFP 130 NC. The drives, switchgear and control system were overhauled in 2009. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

Piec do wyżarzania

Herdieckerhoff STE 300/1000

Niemcy

1986

używany

na żądanie

INNO28576

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

Maszyna do ciągnienia bębnów

Hesse & Jäger

Niemcy

1973

używany

na żądanie

INNO28575

A Hesse & Jäger ring tube drawing machine is available. Drum diameter: 385mm. On-site inspection is possible.

Maszyna do ciągnienia bębnów

Albert & Bergfeld

Niemcy

1988

używany

na żądanie

INNO28574

An Albert & Bergfeld ring pipe drawing machine is available. Drum diameter: 845mm. On-site inspection is possible.

Maszyna do ciągnienia bębnów

P&p 5t-Fertigzug

Niemcy

1992

używany

na żądanie

INNO28573

A P&P ring tube drawing machine is available. Finished draw-drum diameter: 600mm, power: 47.2kW, motor: Stromag, gearbox: Dempewolf. On-site inspection is possible.

Maszyna do ciągnienia bębnów

P&p 8t-Fertigzug

Niemcy

1993

używany

na żądanie

INNO28572

A P&P ring tube drawing machine is available. Finished drawing drum diameter: 600mm, power: 72kW, speed: 1000rpm, oil volume: approx. 200l, motor: Faurndau, gearbox: Keller. On-site inspection is possible.

Maszyna do ciągnienia bębnów

Malmedie EH-5

Niemcy

1980

używany

na żądanie

INNO28571

A Malmedie ring pipe drawing machine is available. Drum diameter: 570mm, operating mode: single horizontal stroke, area of application: ring pipes. On-site inspection is possible.

Piec hartowniczy

Thermconcept KM 590/13

Niemcy

2013

używany

na żądanie

INNO28570

Inner dimensions X/Y/Z: 650mm/1500mm/600mm, outer dimensions X/Y/Z: 1500mm/3000mm/2400mm, volume: 590l, output: 50kW, maximum temperature: 1280°C, weight: approx. 1450kg. The oven shows some signs of use and a few firebricks are broken. Without pneumatic cylinder. Documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Trumpf TruMatic L 3003 B

Niemcy

1992

używany

na żądanie

INNO28569

Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible.