▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [1 - 20 of 973]

Tokarka uniwersalna CNC

Traub TNA 480

Niemcy

1993

używany

na żądanie

INNO29336

A Traub universal CNC lathe is available. Swing diameter over bed/slide: 400mm/360mm, turning diameter maximum/normal: 360mm/320mm, max. turning length: 1000mm, center distance: 2000mm, chuck diameter: 315mm. Spindle bearing diameter: 160mm, spindle bore: 80mm, speed: 4000rpm, power: 26kW, tool positions: 14, travel X/Z: 180mm/1000mm, feed: 24mm/rev, rapid traverse X/Z: 1000mm/1500mm/min. Quill diameter: 100mm, quill stroke: 200mm. Machine dimensions X/Y/Z: approx. 5800mm/2400mm/2400mm, weight: approx. 7200kg, control: Traub System TX-8-D. Documentation available. On-site inspection is possible.

Tokarka cykliczna

Gdw 300 CS

Niemcy

2004

używany

na żądanie

INNO29335

A GDW cycle-controlled lathe is available. Turning diameter: 300mm, travel X/Z: 170mm/650mm, spindle bore: 43mm, speed: 4500rpm, spindle power: 8.3kW, quill holder: MK3, quill stroke: 110mm, quill diameter: 50mm, center height: 150mm, center distance: 650mm. Machine dimensions X/Y/Z: approx. 2300mm/1100mm/1500mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

5-osiowe centrum obróbcze CNC

Deckel Maho DMU 70 eVo linear

Niemcy

2008

używany

na żądanie

INNO29334

A Deckel Maho CNC 5-axis machining center with simultaneous machining capability is available. Table: NC swivel rotary table, table dimensions X/Y: 700mm/500mm, travel X/Y/Z: 750mm/600mm/520mm, tool positions: 60, tool holder: HSK-A63, speed: 18000rpm, rapid traverse: 60m/min, control: Heidenhain iTNC 530, operating hours: 46246h, spindle hours: 16252h. Including 40bar IKZ, Heidenhain measuring probe, Bluhm laser for tool measurement and drill breakage control, chip conveyor, 3D Quick Set without fixture and a 600l coolant tank for the paper belt filter system. Documentation available. On-site inspection is possible.

5-osiowe centrum obróbcze CNC

Deckel Maho DMU 50

Niemcy

2010

używany

na żądanie

INNO29333

A Deckel Maho CNC 5-axis machining center is available. Table: swivel rotary table, table axes: 2, travel X/Y/Z: 500mm/450mm/400mm, tool positions: 30, tool holder: HSK-A63, speed: 14000rpm, rapid traverse: 24m/min, weight: approx. 4000kg, control: Heidenhain iTNC 530, operating hours: 45210h, spindle hours: 15913h. Including 40bar IKZ, paper belt filter, chip conveyor, infrared measuring probe, tool measurement, drill breakage control and a 600l coolant tank for the paper belt filter system. Documentation available. On-site inspection is possible.

Nożyce do blachy

Eht TSS 4-31

Niemcy

1987

używany

na żądanie

INNO29331

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

Tokarka centralna

Weiler LZ 330 VS

Niemcy

1966

używany

na żądanie

INNO29329

Rotation diameter over bed/face slide: 330mm/170mm, max. turning length: 800mm, center distance: 800mm, spindle bore: 58mm, chuck: 160mm, face plate diameter: 308mm. Machine dimensions X/Y/Z: approx. 1700mm/700mm/1250mm, weight: approx. 700kg. Documentation available. On-site inspection is possible.

Wiertarka rzędowa

Solid R25/R25S/R25VS

Niemcy

nieznany

używany

na żądanie

INNO29328

A Solid in-line drilling machine consisting of 4 drilling units is available. Drilling units: 4, max. infeed: 160mm, speed: 2400rpm, table dimensions X/Y: 450mm/2500mm. On-site inspection is possible.

Zrywarka

Niehoff GE 160

Niemcy

1961

używany

na żądanie

INNO29327

A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible.

Tokarka centralna

Weiler Condor VS2

Niemcy

nieznany

używany

na żądanie

INNO29326

Center height: 165mm, center width: 800mm, turning diameter over bed/face slide: 330mm/185mm, spindle bore: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1700mm, weight: approx. 900kg. On-site inspection is possible.

Tokarka dwuwrzecionowa CNC

Mazak Multiplex W200

Niemcy

2017

używany

na żądanie

INNO29325

Swing diameter: 320mm, max. machining length: 180mm, max. bar capacity: 65mm, traverse path X: 275mm, traverse path Z HD1/HD2: 490mm/525mm, spindle power: 22kW, speed: 5000rpm. Tool positions: 2x12, tool speed: 5000rpm, tool power: 5.5kW. Machine dimensions X/Y/Z: approx. 5600mm/4050mm/3200mm, weight: approx. 11500kg, control: Mazatrol SmoothG, operating hours: 40547h, spindle hours 1/2: 26392h/27002h. Including lathe holder, boring bar holder, covers, 2x Kitagawa B-208 power chucks, chip conveyor, GL-100 gantry loader and Grundfos booster pump. Documentation available. On-site inspection is possible.

Tokarka dwuwrzecionowa CNC

Mazak Multiplex W200

Niemcy

2017

używany

na żądanie

INNO29324

Swing diameter: 320mm, max. machining length: 180mm, max. bar capacity: 65mm, traverse path X: 275mm, traverse path Z HD1/HD2: 490mm/525mm, spindle power: 22kW, speed: 5000rpm. Tool positions: 2x12, tool speed: 5000rpm, tool power: 5.5kW. Machine dimensions X/Y/Z: approx. 5600mm/4050mm/3200mm, weight: approx. 11500kg, control: Mazatrol SmoothG, operating hours: 39627h, spindle hours 1/2: 26263h/26441h. Including lathe holder, boring bar holder, covers, 2x Kitagawa B-208 power chucks, chip conveyor, GL-100 gantry loader and Grundfos booster pump. Documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Ipg/idam/paatz YLR-150/1500-QCW-MM

Niemcy

2006

używany

na żądanie

INNO29321

A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.

Walcownia

Bühler VRW 160/80x120

Niemcy

2001

używany

na żądanie

INNO29318

A Bühler reversing strip rolling mill retrofitted in 2020 is available. Working speed: 10m-50m/min, working direction: reversing. Quarto roll stand: backing roll diameter: 160mm, working roll diameter: 80mm, roll bale width: 80mm, drive power: 20kW, setting speed min./max.: 2mm/min/25mm/min, brush diameter: 125mm. Reversing coiler drum diameter: 500mm, reversing coiler belt tension: 1000N-8000N, reversing coiler power: 30kW, material rewinding spread range: 300mm-600mm, cooling lubricant system power: 35kW. Tolerance for measuring length 8mm/50mm: +/-0.5µm and +/-1.5µm, absolute thickness tolerance: +/-30µm. Material width min./max.: 20mm/60mm, max. material thickness: 2mm, coil inner diameter: 500mm, coil outer diameter: 750mm, max. coil weight at strip width 40mm: 75kg. Operating hours of the system since the retrofit (2020): 91h. Documentation available. On-site inspection is possible. Expected to be available from September 2025.

Kabina do malowania proszkowego

Bagi 12-A

Niemcy

2010

używany

na żądanie

INNO29314

A large-capacity BAGI powder spray booth including a powder extraction system is available. 1) Internal dimensions X/Y/Z: 4000mm/3000mm/2600mm, booth floor level: 1000mm, additional equipment compartment dimensions X/Y/Z: 4000mm/1000mm/2100mm. 2) Powder extraction system BAGI 12-A, extraction capacity: 12000m³/h, fans: 2, fan power: 3kW, filter cartridges: 12, filter area: 12x9m², permissible sprayed powder quantity untested/tested: 10g/20g/m³. Documentation available. On-site inspection is possible.

Tokarka CNC

Index V 200

Niemcy

1997

używany

na żądanie

INNO29312

Travel X/Z: 520mm/200mm, rapid traverse: 30m/min, tool positions: 14, speed: 7500U/6000U/min, spindle clearance: 30mm, power: 10kW, turning diameter: 200mm, turning diameter: 260mm, turning height: 200mm. Machine dimensions X/Y/Z: approx. 3250mm/2100mm/2250mm, weight: approx. 3200kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible.

Tokarka CNC

Index V 200-4

Niemcy

nieznany

używany

na żądanie

INNO29311

A CNC vertical lathe Index with a C-axis, driven tools and palletizing is available. Spindle bore: 30mm, speed: 5000rpm, power: 7kW, torque: 33Nm, travel X/Z: 200mm/520mm, rapid traverse X/Z: 30m/min, feed force X/Z: 5000N, C-axis resolution: 0.001°, tool positions: 12, speed: 6000rpm, turning diameter: 270mm, orbital diameter: 325mm, turning length: 200mm. Machine dimensions X/Y/Z: approx. 3250mm/2100mm/2250mm, weight: approx. 3200kg, control: Siemens. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Hurco VMX 24

Niemcy

2003

używany

na żądanie

INNO29305

Travel X/Y/Z: 610mm/508mm/610mm, rapid traverse X/Y/Z: 35m/35m/30m, feed: 7600mm/min, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, tool holder: SK40, tool positions: 24, spindle speed: 10000rpm, power: 7.5kW. Machine dimensions X/Y/Z: approx. 2200mm/2400mm/2500mm, weight: approx. 5000kg, control: Ultimax 4, documentation available. On-site inspection is possible.

Frezarka narzędziowa CNC

Maho MH 700 C

Niemcy

1983

używany

na żądanie

INNO29304

Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, spindle mount: ISO40, speed: 3150rpm, feed: 3m/min, rapid traverse: 6m/min, spindle stroke: 100mm, machine dimensions X/Y/Z: approx. 3800mm/3600mm/2200mm, weight: approx. 3500kg, control: Philips CNC 432, on-site inspection is possible.

Pionowe centrum obróbcze CNC

Dmg Mori DMC 650 V

Niemcy

2014

używany

na żądanie

INNO29303

A DMG Mori CNC vertical machining center including pallet handling Lang is available. 1) DMG Mori, year of manufacture: 2014, travel X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, speed: 14000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool positions: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28250h, spindle hours: 13116h. 2) Automation system for pallets Lang Eco Compact 20, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable on the doors is defective. Documentation available. On-site inspection is possible.

Frezarka CNC z kolumną ruchomą

Zayer KC10000

Niemcy

1995

używany

na żądanie

INNO29302

A CNC traveling column bed milling machine (lateral milling machine) Zayer is available. Travel X/Y/Z: 10000mm/1500mm/3000mm, rapid traverse X/Y/Z: 10m/15m/10m/min, spindle power: 37kW, tool holder: SK50/DIN2080, feed and spindle motors: Indramat, power consumption: 64.1kVA. Machine dimensions X/Y: approx. 18m/6.5m, weight: approx. 40t, control: Heidenhain TNC 415B, operating hours: approx. 61975h, spindle hours: approx. 41500h. Expected to be available from August 2025. Documentation available. On-site inspection is possible.