▷ Used beverage filling technology from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Beverage filling technology / Other machinery

Bin filling 6 Bottle filling systems 14 Carton fillers 2 Other machinery 16

Innovac used-machines

Other machinery [1 - 16 of 16]

Hot-fill System

Fruittech Gmbh/idrotecnica Monoblocco R12 TO

Germany

2022

used

on request

INNO31191

A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.

Bottle Inspector

Heuft InLine reflexx Release 9

Germany

2009

used

on request

INNO30954

An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.

Bottle Washing Machine

Pac Swiss CB 14-0,5l-R-7 LII Compact

Germany

1998

used

on request

INNO30758

A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible.

Unscrewer & Decrowner

Adelski PPE 2005

Germany

1995

used

on request

INNO30757

A fully automatic unscrewing machine M. Adelski is available. Unscrewing heads: 5, capacity range: 2000-12500bottles/h, working height: 1090mm, bottle types: NRW/Euro, bottle volume: 0.5l, machine dimensions X/Y: approx. 950mm/850mm, weight: approx. 1400kg, operating hours: approx. 8500h. Documentation available. An on-site inspection is possible.

Packer

Flema Otto Fleischer

Germany

1994

used

on request

INNO30408

Offered is a bottle packer/bottle case packer year 1994. Euro bottle 20 x 0.5l, capacity approx. 200crates/h, regularly maintained. A viewing is possible by arrangement.

Infeed Turntable

Seema

Germany

unknown

used

on request

INNO30382

Offered is a feed turntable for bottle infeed/collection table, diameter 1000mm, motor drive clockwise. Viewing is possible by arrangement.

Unscrewing Machine

Rink KM790/4K

Germany

2001

used

on request

INNO30344

A case unscrewer/case uncorker Rink is available. Unscrewing heads: 4, uncorking heads: 2, container configuration: 20x0.5l NRW. Machine dimensions X/Y/Z: approx. 2900mm/1300mm/2000mm, control system: Siemens Simatic S7. Documentation available. An on-site inspection is possible.

Cap Removing Machine

Krones

Germany

1999

used

on request

INNO30196

A Krones cap remover from a complete filling line is available. Total line capacity: 30000bottles/h, container volume range: 500ml-1000ml, container types: Euro/GDB long-neck/NRW/GDB bulb-neck/GDB mineral water/Gastro/Gourmet SV/GDB N2 SV. Documentation available. On-site inspection possible. Only the cap remover, not the complete line, is offered.

Bottle Cleaning Machine

Gm Arcade ARCADE GEK 2.1 RV1

Germany

2024

used

on request

INNO29022

Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible.

Canister Filling System

Müpeck Montana 3

Germany

1992

used

on request

INNO28891

A canister filling system for the food industry is available. Dosing system: piston dosing unit, container: 80l, dosing cylinder: V4A, control: Knorr, filling range: 1000l-10150l. Documentation available. On-site inspection is possible.

Swing Stopper Closing Machine

Rico BVH.10 8.14.8

Germany

2004

used

on request

INNO26582

Bottle format: 0.33l Steinie, throughput: 12,000 bottles/h, number of capping stations: 14, control system: Siemens SIMATIC PANEL, on-site inspection is possible.

Packer

A+f Automation Contiflex Multiformer

Germany

2021

used

on request

INNO25567

There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible.

All Surface Empty Bottle Inspector

Krones Linatronic 735 M2

Germany

2007

used

on request

INNO25365

Output: 39,600/h, additional accessories are available.

All Surface Empty Bottle Inspector

Heuft SPECTRUM

Germany

2009

used

on request

INNO24401

There are three HEUFT inspectors available (1) empty container inspector with rejection (2) logo detection with rejection (3) empty bottle inspector with reject table and rejections (4) belts and belt control with the complete motors.

Keg Washing and Filling Line

Leifeld+lemke KBV 100

Germany

1986

used

on request

INNO22540

Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout.

All Surface Empty Bottle Inspector

Heuft InLine TI 24 BFS1

Germany

2004

used

on request

INNO22322

Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021.