Innovac GmbH Used machines from Germany
Innovac used-machines Compressed-air [1 - 20 of 49]
Screw-Compressor-Kaeser-SK19 used
Screw Compressor
Kaeser SK19
Germany
1997
used
on request
INNO26819
Power: 11kW, Voltage: 230/460Volt, 3-Phase, max. Operating Pressure: 10bar, Flow Rate: 1.5m³/min, max. Flow Rate: 1.92m³/min (68 CFM), Flow Rate at Max. Pressure: 1.27 m³/min (45CFM). Dimensions (Length/Width/Height): 812,8mm/762mm/1041,4mm
Compressor-Compair-hydrovane-beko-CompAir-F36M used
Compressor
Compair/hydrovane/beko CompAir F36M
Germany
unknown
used
on request
INNO26741
Several compressors from the manufacturers Hydrovane and Beko are available. The compressors are only sold as a package deal. Individual machines cannot be sold separately.
Screw-Compressor-Kaeser-CSD102 used
Screw Compressor
Kaeser CSD102
Germany
unknown
used
on request
INNO26670
Compressor is fully functional with run: 44621h and load: 22249h. Approximately 20 years old, but always serviced by a Kaeser service center.
Screw-Compressor-Atlas-Copco-GA75-VSD used
Screw Compressor
Atlas Copco GA75 VSD
Germany
2013
used
on request
INNO26526
Volume flow: 15m³/min, motor speed: 3000/min, connected load: 75kW, weight: 1.534t, with documentation, an on-site inspection is possible.
Screw-Compressor-Atlas-Copco-ZE-90 used
Screw Compressor
Atlas Copco ZE 90
Germany
1998
used
on request
INNO26525
Max. operating pressure: 3.5bar, max. rotational speed: 2980/min, connected load: 73 kW, an on-site inspection is possible.
Screw-Compressor-Mark-MSA-11-IVR-G2 used
Screw Compressor
Mark MSA 11 IVR G2
Germany
2013
used
on request
INNO26499
Max. operational pressure: 10bar, connected load: 11kW, weight: 235kg, an inspection is possible.
Screw-Compressor-Josef-Mehrer-BS-37-8 used
Screw Compressor
Josef Mehrer BS 37-8
Germany
1994
used
on request
INNO26409
Volume flow: 5850l/min, rotational speed: 5750/min, motor power: 37kW, length: 2000mm, width: 900mm, height: 1250mm, weight: 830kg, with documentation, an inspection is possible, has been out of service since 2011, until this date it ran without any problems.
Screw-Compressor-Boge-65D-14 used
Screw Compressor
Boge 65D-14
Germany
unknown
used
on request
INNO26240
Volume flow: 7.8m³/h, rotational speed: 2935/min, power: 55.3kW, length: 2350mm, width: 970mm, height: 1950mm, weight: 1,275t, operational hours counter: 37,429h, an inspection is possible.
Screw-Compressor-Compair-L-07-10 used
Screw Compressor
Compair L 07-10
Germany
2007
used
on request
INNO26193
Volume flow: 0.93m³/min, rotational speed: 3000/min, motor power: 7.5kW, weight: 196kg, with compressed air tank OKSA, capacity: 1000l, and dryer, an on-site inspection is possible.
Air-Handling-Unit-Gea-CAIRplus-128.064-AVVV used
Air Handling Unit
Gea CAIRplus 128.064 AVVV
Germany
2012
used
on request
INNO26164
Supply/exhaust air volume flow: 6500m³/h, total supply/exhaust air pressure: 992/881Pa, heating capacity: 48kW, cooling capacity: 22.6kW, connected load: 8.1kVA, with Hygromatik FLE80-T steam humidifier, pipework, control cabinet, AERMEC WLR 101° water-cooled chiller, condenser, frequency converter, other elements and documentation, on-site inspection is possible.
Screw-Compressor-Kaeser-SK-25 used
Screw Compressor
Kaeser SK 25
Germany
1986
used
on request
INNO26079
There are two identical screw compressors available, operating pressure: 7.5bar, max. pressure: 8bar, volume flow: 0,82-2,57m³/min, width: 750mm, length: 895mm, height: 1260mm, weight: 337kg, were completely overhauled and always serviced.
Tooth-Compressor-Atlas-Copco-ZR-45 used
Tooth Compressor
Atlas Copco ZR 45
Germany
1994
used
on request
INNO26002
There are two identical compressors available, max. final pressure: 8bar, rotational speed: 3000/min, motor power: 45kW, operational hours counter: ca. 80,000h, each with a Dry Air Dryer Atlas Copco MD 100W.
Screw-Compressor-Atlas-Copco-GA30 used
Screw Compressor
Atlas Copco GA30
Germany
unknown
used
on request
INNO25749
An inspection is possible.
Generator-Atlas-Copco-QAS-60 used
Generator
Atlas Copco QAS 60
Germany
unknown
used
on request
INNO25724
Power: 60kVA, length: 2730mm, width: 1100mm, height: 1795mm, weight: 1.525t, operational hours counter: 5559h.
Compressor-Unit-Compair used
Compressor Unit
Compair
Germany
2014
used
on request
INNO25590
There is a complete compressed air system available, including (1) Screw Compressor Compair L110 RS-13A, load: 110kW (2) Screw Compressor Compair L90-10A, load: 90kW (3) Screw Compressor Renner RSF 765, load: 75kW, year of construction: 2011, operational hours counter: 22,380h (4) 2x Compressed Air Tank Maschinen- und Behälterbau MB 140331, capacity: 5000l, year of construction: 2014 (5) 2x Refrigeration Dryer CompAir F0630HS-A400, weight: 580kg, year of construction: 2014, with additional equipment.
Screw-Compressor-Boge-SF-100-2 used
Screw Compressor
Boge SF 100-2
Germany
unknown
used
on request
INNO25556
There are five compressors available (1) 2x Screw Compressor Boge SF 100-2, motor power: 75kW, length: 2000mm, width: 1065mm, height: 1950mm, weight: 1.14t, with documentation (2) Screw Compressor Boge S 61-2, max. rotational speed: 3600/min, weight: 1.3t, with documentation (3) Screw Compressor Kaeser BS 61, volume flow: 5.25m³/min, connected load: 37kW (4) Screw Compressor Boge S 40-2, motor power: 30kW, length: 1620mm, width: 960mm, height: 1450mm, weight: 740kg, with documentation.
Screw-Compressor-Atlas-Copco-GA-15 used
Screw Compressor
Atlas Copco GA 15
Germany
1998
used
on request
INNO25420
Operational hours counter: ca. 75,000h, was maintained regularly, with documentation.
Screw-Compressor-Atlas-Copco-GA15-FF used
Screw Compressor
Atlas Copco GA15 FF
Germany
2001
used
on request
INNO25419
Nominal motor power: 15kW, operational hours counter: ca. 85,000h, was maintained regularly.
Industrial-Screw-Compressor-Ekomak--EKO-30D-VST used
Industrial Screw Compressor
Ekomak EKO-30D VST
Germany
2011
used
on request
INNO25418
Power: 30kW, weight: 930kg, operational hours counter: ca. 85,000h, without frequency converter.
Screw-Compressor-Kaeser-ASD-57-SIGMA used
Screw Compressor
Kaeser ASD 57 SIGMA
Germany
unknown
used
on request
INNO25300
Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,212h.