▷ Used energy management from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Energy management

Air conditioning 1 Block heats 7 Components and accessories 3 Compressed-air 35 Emergency power generators 2 Gas technology 3 Generators 2 Heat exchanger 3 Heating and blowers 6 Motors and turbins 23 Refrigerator cooling 36 Steam boilers 21 Steam turbines 1 Switchgears and controlgears 3 Transformer 6

Innovac used-machines

Energy management [41 - 60 of 152]

Steam Boiler

Certuss Junior 600

Germany

2009

used

on request

INNO31088

Three identical Certuss steam generators are available. Year of manufacture: 2008/2009/2010, steam output: 600kg/h, pressure vessel volume: 42.9l, set pressure: 10bar, test pressure: 57bar. Machine dimensions X/Y/Z: 1650mm/900mm/2000mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.

Condenser

Kelvion 3329.RF-SJ102L2H-8

Germany

2008

used

on request

INNO31084

Medium: HCFC/HFC 2, max. operating temperature: 32bar, min. temperature: -40°C, max. temperature: 120°C, coil volume: 11.6l, weight: approx. 65kg. Documentation available. An on-site inspection is possible.

Wind Turbine

Vestas V52-MK3

Germany

2005

used

on request

INNO31074

A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible.

Built-In Cooling Unit

Güntner/riedel

Germany

unknown

used

on request

INNO30999

Two built-in refrigeration units from the manufacturers Güntner and Riedel are available. Both units have been in storage for a long time and are uninspected. Documentation available. An on-site inspection is possible.

Drive Motor

Lenze GSS06-2/GSS06-2M VAR 112C22

Germany

2022

used

on request

INNO30917

Two brand new and unused Lenze gear motors are available. 1) Lenze GSS06-2, Power: 5kW, Speed: 1450rpm, Torque: 445Nm, Ratio: 20:1, Efficiency: IE3, Duty type: S1, Insulation class: F. 2) Lenze GSS06-2M VAR 112C22, Power: 4kW, Speed: 1450rpm, Torque: 444Nm, Ratio: 20:1, Efficiency: IE2, Duty type: S1, Insulation class: F. Documentation available. An on-site inspection is possible.

Pure Steam Generator

Concept Gmp VapoPure UCS 300

Germany

2018

used

on request

INNO30731

Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible.

Steam Boiler

Viessmann Vitoplex 100-LS

Germany

2020

used

on request

INNO30606

A complete low-pressure steam boiler system Viessmann is available. 1) Condensate unit Viessmann TWA-T LS 0,9, max. operating pressure: 0.1bar, test pressure: 0.2bar, max. temperature: 110°C, water volume: 400l. 2) Dosing system Schweizer-Chemie EMP 2.5l E60. 3) Steam generator Viessmann Vitoplex 100-LS, year of manufacture: 2019, nominal heat output: 460kW, steam capacity: 700kg/h, water volume: 960l, operating pressure: 1bar, test pressure: 4.8bar. 4) Control cabinet Viessmann Vitocontrol HS. 5) Steam accumulator/pressure vessel Viessmann RBS/1 1000 So. steam, volume shell space/tube space: 990l/17l, max. operating overpressure shell space/tube space: 10bar/2.5bar, max. operating temperature shell space/tube space: 95°C/130°C, test pressure shell space/tube space: 13bar/4bar. Documentation available. An on-site inspection is possible.

Ice Water Recooler

Gea FX GC VP 260

Germany

2011

used

on request

INNO30569

A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

Plate Heat Exchanger

Kyffhäuserhütte PAP 4/531.1

Germany

1986

used

on request

INNO30568

A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible.

Screw Compressor with Integrated Dryer

Boge SD 40

Germany

unknown

used

on request

INNO30552

Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement.

Screw Compressor

Comair MSK G15/10 AF1N2

Germany

1997

used

on request

INNO30497

A screw compressor is offered. Maximum pressure 10bar, volume flow approx. 2020l/min (2.02m3/min) with separate compressed air tank, galvanized. Viewing possible by appointment.

Refrigerating Machine

Wöhr D20V / D30V

Germany

1998

used

on request

INNO30466

2 oil coolers - through-flow oil coolers: year of construction 1998. Refrigerant: R404A, circulation pump, LAE controller MTR11, suitable for clean oil. Documentation available. 1) Type D 20 V, cooling capacity: 2kW, Walter Procon connector plug, total power consumption 1.7kW. 2) Type D 30 V, cooling capacity: 3.3kW, CEE connector plug, total power consumption 2kW. Dimensions X/Y/Z: approx. 800mm/750mm/1100mm. Inspection possible by appointment.

Motor

Siemens/vem

Germany

2017

used

on request

INNO30325

One Siemens flange gear motor and two identical VEM three-phase motors are available. 1) Siemens flange gear motor, year of manufacture: 2014, shaft diameter: 80mm, power: 160kW, speed: 1485rpm, gear ratio: 33. 2) 2x VEM three-phase motors, year of manufacture: 2017, power: 200kW, speed: 1490rpm, operating mode: continuous operation, power factor: 0.87, weight: approx. 250kg. An on-site inspection is possible. Individual sale possible.

Asynchronous Three-Phase Induction Motor

Vem DSRAN 7132-8WF

Germany

2010

used

on request

INNO30324

Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich.

Electric Motor

Vem DSRAN 8033-6WF

Germany

2014

used

on request

INNO30302

An unused three-phase electric motor VEM is available. Design: IM1001, protection class: IP55, rotation direction: CCW, insulation class: F, lubrication system: Shell Alvania RL3, rated power: 4600kW (approx. 4.6MW), rated voltage: 6300V, rated current: 460A, power factor: 0.88, rotor voltage: 2000V, rated speed: 994rpm, moment of inertia: 690km/m². Machine dimensions X/Y/Z: approx. 4150mm/2300mm/1900mm, weight: approx. 20000kg. The machine is unused and therefore as new. Documentation vorhanden. An on-site inspection is possible.

Boiler Plant

Polytechnik LS 2000 DG

Germany

1997

used

on request

INNO30279

A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible.

Boiler Plant

Polytechnik PR 2000

Germany

2000

used

on request

INNO30278

A boiler plant is available. Thermal output: 2000kW, water content: 5820l, heating surface: 250m², max. operating overpressure: 4bar, water quality: TRD 612, max. permissible flow temperature: 110°C. An on-site inspection is possible.

Chiller

Kratschmayer CW-C11R0411CP

Germany

2023

used

on request

INNO30267

A complete Kretschmeyer chilled water system is available. Cooling capacity: 40.7kW, medium temperature inlet/outlet: 12°C/6°C, max. operating pressure low pressure/high pressure: 18bar/28bar, test pressure low pressure/high pressure: 26bar/40bar, refrigerant: R290, refrigerant charge: 4300g. Machine dimensions X/Y/Z: approx. 2800mm/1350mm/2350mm, weight: approx. 1050kg. Including hydraulic module, cooling water circulation pump, buffer tank, and remote maintenance module (monitoring package). Documentation available. An on-site inspection is possible.

Steam Boiler

Weishaupt WM-G30/1-A

Germany

2017

used

on request

INNO30211

Two Weishaupt gas burners including two WMG boilers are available. Output: 2x3.3MW. Documentation available. An on-site inspection is possible.

Chiller

Daikin EWQ009ACW1P

Germany

2010

used

on request

INNO30186

A small Daikin chiller with inverter is available. Refrigerant: R410A, refrigerant charge: 2.95kg, max. operating pressure high/low side: 4MPa/3MPa, max. water pressure: 3bar, weight: approx. 180kg. Documentation available. An on-site inspection is possible.