Innovac GmbH Used machines from Germany
Innovac used-machines Material testing [1 - 12 of 12]
Universal-Oven-Memmert-UF30 used
Universal Oven
Memmert UF30
Germany
2020
used
on request
INNO29819
Operating temperature: 10-300°C, setting temperature: 20-300°C, setting accuracy: up to 99.9°C: 0.1°C, from 100°C: 0.5°C, temperature sensor: 1x Pt100 DIN class A, 4-wire measurement, control: Control COCKPIT Single DISPLAY, digital PID microprocessor controller with TFT color display, timer: 1 minute to 99 days, functions: SetpointWAIT, calibration of 3 temperature values, parameter selection (temperature, circulating air motor, exhaust air, program runtime, time zones), electronically controllable air turbine adjustable in 10% steps, fresh air via adjustable exhaust flap with preheating, exhaust port with throttle valve electronically controllable, logging: storage in case of power failure, programming: data logger evaluation via Ethernet, AtmoCONTROL software optional via USB, safety: electronic temperature monitoring, mechanical limiter TB, protection class 1 (DIN 12880), self-diagnosis system, internal dimensions: 400x320x250mm, volume: 32l, max. inserts: 3, max. load: 60kg, max. load per insert: 20kg, length: 650mm, width: 660mm, height: 890mm, weight: 45kg. The oven has hardly been used. An on-site inspection is possible.
Corrosion-Testing-System-Liebisch-constanzo-KB-300 used
Corrosion Testing System
Liebisch/constanzo KB 300
Germany
2010
used
on request
INNO29691
A climate chamber for corrosion testing with condensation water tests is available. Volume: approx. 300l, max. sample weight: 15kg/shelf, test chamber dimensions X/Y/Z: 745mm/505mm/770mm, door opening X/Y: 505mm/505mm, max. temperature: 50°C, machine dimensions X/Y/Z: approx. 1100mm/700mm/1100mm, weight: approx. 65kg. Documentation available. An on-site inspection is possible.
Fully-Automatic-X-Ray-Inspection-Anritsu-XR-75-KXS7522AVCLE used
Fully Automatic X-Ray Inspection
Anritsu XR 75 (KXS7522AVCLE)
Germany
2016
used
on request
INNO28620
An almost new Anritsu X-ray inspection system is available. X-ray power: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed from 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed from 5kg to 10kg: 10m-40m/min, housing material: stainless steel, machine weight: approx. 255kg, operating hours: less than 50h. The machine shows no wear on the conveyor belt or the radiation protection curtains. Documentation available. On-site inspection is possible.
Hardness-Testing-Machine-Zwick-3202 used
Hardness Testing Machine
Zwick 3202
Germany
1969
used
on request
INNO27522
Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.
Climate-Cabinet-Memmert-UL-800Ü used
Climate Cabinet
Memmert UL 800Ü
Germany
unknown
used
on request
INNO28332
A Memmert universal heating oven for laboratory and test procedures is available. Nominal temperature: 180°C, internal dimensions X/Y/Z: 1040mm/1200mm/600mm, internal volume: 750l, output: 6.2kW, external dimensions X/Y/Z: approx. 1200mm/1650mm/750mm, weight: approx. 200kg. On-site inspection is possible.
Fully-Automatic-X-Ray-Inspection-Anritsu-XR75 used
Fully Automatic X-Ray Inspection
Anritsu XR75
Germany
2018
used
on request
INNO27312
A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.
Hydraulic-Testing-System-Niehues-DN200-DN600 used
Hydraulic Testing System
Niehues DN200-DN600
Germany
2019
used
on request
INNO27302
A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000.
Climate-test-chamber-Feutron-Klimasimulation-KPK-900l used
Climate test chamber
Feutron Klimasimulation KPK 900l
Germany
2008
used
on request
INNO26599
Test chamber volume: 900 l, Temperature range: -40°C - +100°C, humidity range: 10 - 98, Test chamber weight: 750kg, refrigeration system weight: 480kg. Refrigerant, refrigerant quantity and operating pressure: R134a/0.8kg/18bar, R507/4.0kg/27bar, R23/1.0kg/27bar
Universal-Crack-Detection-Machine-K+d-Flux-technic used
Universal Crack Detection Machine
K+d Flux-technic
Germany
unknown
used
on request
INNO26245
Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible.
Rheometer-Göttfert-ELASTOGRAPH-67.85 used
Rheometer
Göttfert ELASTOGRAPH 67.85
Germany
1987
used
on request
INNO26128
Rotorless rotational shear vulcameter with filter mats, calibration weights, new stepper motor and documentation. The device has been recalibrated and the chamber renewed, control unit has been replaced with a standard PC connection, on-site inspection is possible.
Hardness-Testing-Machine-Otto-Wolpert-werke-DiaTestor-3a used
Hardness Testing Machine
Otto Wolpert-werke DiaTestor 3a
Germany
1973
used
on request
INNO25083
Max. test load range: 750kg, with documentation and accessories.
Material-Testing-Machine-Netzsch-DMA-GABO-Eplexor-4000N used
Material Testing Machine
Netzsch DMA GABO Eplexor 4000N
Germany
2009
used
on request
INNO23733
Max. static force: 4000N, max. dynamic force: +/-4000N, temperature range: -160 to 500°C, including accessories, was last calibrated in 2020.