Innovac GmbH Used machines from Germany
Innovac used-machines Other machinery [1 - 13 of 13]
Optical-Inspection-Machine-Koh-Young-Zenith-AOI used
Optical Inspection Machine
Koh Young Zenith AOI
Germany
2014
used
on request
INNO30874
Two automatic optical inspection machines Koh Young for inline quality control of electronic printed circuit boards are available. Resolution: 15µm, height accuracy: +/-0%, max. 3D measurement height: 5mm, inspection speed: 18.3cm²/s, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 510mm/580mm, PCB thickness range: 0.4mm-5mm, component clearance below the assembly: 50mm. Machine dimensions X/Y/Z: approx. 1000mm/1270mm/1650mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.
Optical-Inspection-Machine-Göpel-VarioLine-3D-X100-AOI used
Optical Inspection Machine
Göpel VarioLine 3D X100 AOI
Germany
2019
used
on request
INNO30873
An automatic optical inspection machine Göpel for inline quality control of electronic printed circuit boards is available. Inspection types: 2D/3D/360°/AOI, viewing angle: 45°, 3D camera module: ViewZ, resolution X/Y: 21µm/10.5µm, component clearance below/above the assembly: 50mm/40mm, max. inspection speed: 100cm²/s, max. inspection dimensions X/Y: 570mm/510mm, max. printed circuit board weight: 5kg, min. printed circuit board width: 80mm, machine dimensions X/Y/Z: approx. 1200mm/1450mm/1650mm, weight: approx. 950kg. Including licences. Documentation available. An on-site inspection is possible.
Equipment-Safety-Tester-Gossen-Metrawatt-Secutest-S2 used
Equipment Safety Tester
Gossen Metrawatt Secutest S2
Germany
unknown
used
on request
INNO30661
Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310µA with resolution: 100nA, measuring range: 0.3mA-2.1mA with resolution: 1µA, measuring range: 2mA-11mA with resolution: 10µA. Including as-new spare parts, 6x housing covers, hinge rods and SI+ modules. Documentation available. An on-site inspection is possible.
Testing-System-Spitzenberger-Spies-EMV-D-30000-PAS used
Testing System
Spitzenberger Spies EMV D 30000/PAS
Germany
unknown
used
on request
INNO30475
Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.
Network-Analyzer-Hp-8753D-3325A used
Network Analyzer
Hp 8753D/3325A
Germany
unknown
used
on request
INNO30142
Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, max. frequency range: 21MHz, resolution: 1µHz, max. amplitude: 10V. Machine dimensions X/Y/Z: approx. 450mm/150mm/450mm, weight: approx. 15kg. All devices were calibrated in 2019. Documentation available. On-site inspection possible.
Drop-Tester-Lansmont-PDT-80M used
Drop Tester
Lansmont PDT 80M
Germany
unknown
used
on request
INNO30012
A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.
Spectrophotometer-Datacolor-800 used
Spectrophotometer
Datacolor 800
Germany
2020
used
on request
INNO30007
A color measurement device Datacolor is available. Measurement geometry: d/8°, illumination system: Dual, integrating sphere diameter: 152mm, wavelength range: 360nm-700nm, wavelength resolution: 2nm, measurement interval: 10nm, photometric range: 0%-200%, spectral analyzer: SP2000. Machine dimensions X/Y/Z: approx. 320mm/340mm/420mm, weight: approx. 17kg. Documentation available. An on-site inspection is possible.
Pump-Test-Stand-Etewe-Gmbh used
Pump Test Stand
Etewe Gmbh
Germany
2006
used
on request
INNO26540
Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible.
Web-Inspection-System-Bst-webscope-B60-10-G used
Web Inspection System
Bst webscope B60-10-G
Germany
2008
used
on request
INNO26095
There are two identical machines available, year of construction machine 1/ 2: 2003/ 2008, with documentation, were part of a flexo printing machine Fischer & Krecke 16S/10.
Helium-Leak-Tester-Gmg-Automation used
Helium Leak Tester
Gmg Automation
Germany
1997
used
on request
INNO25543
Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation.
Shielding-Box-Emc-technik-and-Consulting-Gmbh used
Shielding Box
Emc-technik & Consulting Gmbh
Germany
2012
used
on request
INNO25475
Shielding box for electromagnetic compatibility, length: 728mm, width: 520mm, height: 520mm, with full absorber lining (ferrite absorber), 10x feed-through filters (banana sockets), BNC feed-through, cold device feed-through (filtered), Sub-D feed-through (filtered), waveguide feed-through for optical cables, double EMC seal, antenna feed-through (conduit feed-through), shielding attenuation and two gas pressure springs.
Temperature-Test-Chamber-Vötsch-VT-3050 used
Temperature Test Chamber
Vötsch VT 3050
Germany
2007
used
on request
INNO24882
Capacity: 500l, temperature range: -30 to 100°C, inner dimensions: 590x710x1250mm, nominal power: 1.9kW, length: 1030mm, width: 710mm, height: 1955mm, with documentation.
UV-VIS-Spectrophotometer-Beckmann-DU-640 used
UV-VIS Spectrophotometer
Beckmann DU 640
Germany
1997
used
on request
INNO23861
Including documentation.