Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Measurement and testing / Measuring systems
Balancing machines 1 Local positioning technology 35 Material testing 14 Measuring systems 20 Other machinery 7 Test bench 1
Innovac used-machines Measuring systems [1 - 20 of 20]
Acid-Hydrolysis-System-Gerhardt-HT6-V02 used
Acid Hydrolysis System
Gerhardt HT6 V02
Germany
unknown
used
on request
INNO32545
An automated acid hydrolysis system for fat determination with 6 sample positions is offered. Sample configuration: 3 chambers with 2 tubes each. Degree of protection: IP20. The system is designed for automated acid hydrolysis for fat determination. The process takes place in an enclosed room. Inspection possible by prior arrangement.
more
Spectrophotometer-Colorlite-sph91 used
Spectrophotometer
Colorlite sph91
Germany
2023
used
on request
INNO32535
Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh*, Luv*, ΔE CIE Lab*, ΔE CIE94, ΔL*, Δa*, Δb*, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for "ColorDaTra_IPM" software version 1.94, installation file for update to version 1.95 and license key, last calibrated in 2025. On-site inspection is possible.
more
Plenoptic-Camera-Raytrix-R42 used
Plenoptic Camera
Raytrix R42
Germany
2017
used
on request
INNO32495
Offered for sale is an industrial 3D camera with light field technology. Equipped with a RICOH lens and custom-fit transport case with foam insert. The camera is offered in fully functional condition. Inspection possible by prior arrangement.
more
Shaft-Measuring-Machine-Ibb-Technology-PREMION-M-318-1408-1200 used
Shaft Measuring Machine
Ibb Technology PREMION M 318-1408-1200
Germany
2018
used
on request
INNO32226
A manual shaft measuring device for measuring shafts and rotationally symmetrical workpieces and for determining various form, position, length and diameter parameters is offered. Measuring length: 1200mm, max. workpiece diameter: 200mm, max. workpiece weight: 50kg, measuring method: manual, software: PREMION measuring software, operating system: Windows 11. Equipment: PC with monitors, keyboard and mouse, manual length and diameter module, centering tips and additional measuring accessories, PC replaced and equipped with Windows 11. Weight: 250kg. An on-site inspection is possible.
more
Tool-Presetting-Device-Gildemeister-de-Vlieg-Microset-EGS-1535-001-Orion-2 used
Tool Presetting Device
Gildemeister-de Vlieg Microset EGS-1535-001 / Orion-2
Germany
1990
used
on request
INNO32153
Offered for sale is a Gildemeister tool presetter. Max. tool diameter: approx. 350mm, max. tool length: approx. 350mm, tool holders: ISO 40 / ISO 50. Foot pedal included. The control was replaced with Orion in 2021. Calibration and maintenance in 2023. Dimensions X/Y/Z: approx. 1100mm/650mm/840mm. An on-site inspection is possible.
more
Measuring-System-Faro-Edge-LLP-HD used
Measuring System
Faro Edge / LLP HD
Germany
2015
used
on request
INNO32141
A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible.
more
Residual-Moisture-Analyzer-Brabender-Aquatrac-Station-822000 used
Residual Moisture Analyzer
Brabender Aquatrac Station 822000
Germany
2021
used
on request
INNO31920
A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment.
more
CNC-Video-Measuring-Microscope-Garant-MM2-CNC used
CNC Video Measuring Microscope
Garant MM2 CNC
Germany
unknown
used
on request
INNO31653
X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuring tasks, storage of executed actions as measuring macros. An on-site inspection is possible.
more
Tool-Preset-System-Royal-Basic used
Tool Preset System
Royal Basic
Germany
2004
used
on request
INNO31447
A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit including pressure gauge, fine adjustment via handwheels, zero point storage, measured value hold function. Weight: approx. 95kg, overall dimensions X/Y/Z: approx. 600mm/550mm/1100mm. Inspection possible by arrangement.
more
Flow-Meter-Krohne-Optimass-6400-F used
Flow Meter
Krohne Optimass 6400 F
Germany
2019
used
on request
INNO30785
A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200l/h. 5) Sensor: Optimass 6000-S15, connection DN25 Tri-Clamp, installation length: 480mm, max. measuring range: 0l-1500l/h. Position 5 was installed solely for testing purposes. Documentation available. An on-site inspection is possible.
more
Measuring-Device-Man-200KN-9606 used
Measuring Device
Man 200KN/9606
Germany
1984
used
on request
INNO30394
Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.
more
Measuring-Device-Amsler-Wolpert-40-THZ-–-400KN used
Measuring Device
Amsler Wolpert 40 THZ – 400KN
Germany
1979
used
on request
INNO30392
Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.
more
Optical-Measurement-System-Keyence-IM-6120 used
Optical Measurement System
Keyence IM-6120
Germany
unknown
used
on request
INNO30243
An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible.
more
CNC-Vision-Measuring-System-Mitutoyo-QS-250Z used
CNC Vision Measuring System
Mitutoyo QS-250Z
Germany
2001
used
on request
INNO29618
A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible.
more
Particle-Size-and-Zeta-Potential-Analyzer-Malvern-ZEN-2600 used
Particle Size and Zeta Potential Analyzer
Malvern ZEN 2600
Germany
2013
used
on request
INNO29164
A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.
more
Optical-Measurement-System-Keyence-LS-9000 used
Optical Measurement System
Keyence LS-9000
Germany
unknown
used
on request
INNO28859
Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible.
more
Roundness-Measuring-Device-Mitutoyo-RA-426-436 used
Roundness Measuring Device
Mitutoyo RA-426/436
Germany
2001
used
on request
INNO28642
A Mitutoyo roundness analysis system without monitor is available. Rotation accuracy: 0.02 + 0.0006H, rotation speed: 2/4/6/8/10 rpm, max. workpiece weight: 30kg, max. workpiece diameter: 500mm, machine weight: approx. 200kg, control: Roundpak-400, version: 3.002. Documentation available. On-site inspection is possible.
more
Weight-Per-Unit-Area-Measuring-System-Scantech-HF3-XT10 used
Weight Per Unit Area Measuring System
Scantech HF3 XT10
Germany
2022
used
on request
INNO28151
A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible.
more
Multisensor-Measuring-Machine-Mahr-MarVision-MS662 used
Multisensor Measuring Machine
Mahr MarVision MS662
Germany
unknown
used
on request
INNO27836
Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.
more
One-Shot-3D-Measuring-Macroscope-Keyence-VR-3050 used
One-Shot-3D Measuring Macroscope
Keyence VR-3050
Germany
unknown
used
on request
INNO18164
Max. magnification: 50x, measuring height: 10mm, connected load: 150VA, weight: 29.5kg.
more
Innovac used machines from Germany Our Program
Agricultural-machines 3
Automation-technology 60
Beverage-filling-technology 40
Complete-production-lines 3
Construction-machinery 33
Energy-management 153
Food-processing-and-beverage 167
Material-storage 70
Materials-handling-technology 82
Measurement-and-testing 78
Medical-equipment 21
Metal-processing-machines 1242
Mining 7
Office-equipment 4
Other-machines 60
Packaging-machines 250
Pharmaceutical-and-cosmetics 16
Plastics-processing-machines 188
Printing-machines 104
Process-equipment-and-chemistry 176
Packaging-material-machinery 87
Robotics 31
Surplus-goods 5
Textile-machinery 109
Utility-vehicles 13
Woodworking-machines 105