▷ Used process equipment and chemical plants from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Process equipment and Chemical plants / Filter systems

Blowers 3 Centrifuges 8 Chamber filter-press 1 Compressors 24 Decanter 1 Filter systems 35 Mills 10 Mixing machines 38 Other machinery and plants 14 Paper production 1 Presses 1 Pumps 9 Storage containers and tanks 21 Water treatment equipment 7

Innovac used-machines

Filter systems [1 - 20 of 35]

Suction Unit

Höcker Polytechnik EA 250-5A

Germany

1998

used

on request

INNO31270

An industrial vacuum dust collector Höcker is available. Suction diameter: 250mm, nominal volume flow: 4241m³/h, min. volume flow: 3534m³/h, motor power: 5.5kW, vacuum pressure: 2940Pa, weight: approx. 630kg. Documentation available. An on-site inspection is possible.

Suction Unit

Vaupel Wavaso VHF-S-1.6/2.2-2.5

Germany

2014

used

on request

INNO31253

A vibration and hose filter system Vaupel is available. Air volume flow: 3200m³/h, motor power: 3kW, speed: 2300rpm, filter area: 9m². An on-site inspection is possible.

High Capacity Filtration System

Polo Filter-technik SBEV-B1.4

Germany

2014

used

on request

INNO31252

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Suction and Filtering System

Ivat Profi-Tower RS 28.000K

Germany

2019

used

on request

INNO31051

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Ventilation System

Wolf

Germany

2012

used

on request

INNO31026

Size supply air: Top 21, supply air volume: 1840m³/h, length: 3764mm, width: 712mm, height: 508mm, weight: 333kg. Equipment: pocket filter F7 (short pockets) with differential pressure switch, high air purification efficiency, heater section (long), high-performance heat exchanger for reliable heating, cooling section, prepared for external cooling supply including droplet separator, fan (standard version), energy-efficient and low-noise, empty section with flow distributor, for optimal airflow guidance, silencer type 12, effective noise reduction. Accessories: canvas connection, equipotential bonding, differential pressure switch. System is fully functional, condition very good. An on-site inspection is possible.

Suction Unit

Kiekens Dustmaster 4000

Germany

unknown

used

on request

INNO30986

A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.

Cartridge Filter System

Sult PDMS 1/4

Germany

1998

used

on request

INNO30713

A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Solvent Recycling Machine

Lömi LRA-50

Germany

1999

used

on request

INNO30676

An untested vacuum distillation unit/solvent recycling unit Lömi for the recovery of organic solvents is available. Volume: 50l, operating volume: 30l, distillation capacity range: 8l-20l/h, max. operating temperature: 250°C, protection: EX, vacuum pump type: LÖ/V 6, max. vacuum pressure: 80mbar. Machine dimensions X/Y/Z: approx. 1450mm/600mm/1800mm, weight: approx. 300kg. An on-site inspection is possible.

Air Filtration Plant

Trotec Tac 6500

Germany

2020

used

on request

INNO30588

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Filter Press

Schenk Orion 60x60

Germany

unknown

used

on request

INNO30572

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

Precoat Filter System

Faudi ASTAV 16-6

Germany

1993

used

on request

INNO30062

A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible.

Air Purifier

Crt Roomguard RG01

Germany

2020

used

on request

INNO30041

Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible.

Suction and Filtering System

Krämer VFM-P/VKA-P/VFM-R/GFS Shake 160 25 250

Germany

2009

used

on request

INNO30034

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Suction Unit

Lta DF 300 Jet

Germany

2018

used

on request

INNO29996

Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.

Suction Unit

Wolf KG 40

Germany

unknown

used

on request

INNO29912

A Wolf exhaust unit for wet rooms is available. Air volume flow: 1000m³/h, pressure loss (external): 200Pa, motor power: 0.25kW, motor speed: 1500rpm. Documentation available. An on-site inspection is possible.

Suction Unit

Schmidt, Kranz & Co. Airator

Germany

unknown

used

on request

INNO29748

A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.

Suction Unit

Wieland VS-3 T

Germany

1987

used

on request

INNO29563

A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

Water-Spray Paint Mist Extraction Wall

Rippert RWS 5000

Germany

1997

used

on request

INNO29498

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

Suction Unit

Kemper CleanAirTower SF 5000

Germany

2019

used

on request

INNO29338

An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible.

Wet Dedusting System

Ulrich Venturi

Germany

2021

used

on request

INNO28789

A wet extraction system Ulrich Anlagen und Industrieservice is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, particle size: less than 1µm, separation efficiency: 97.5%, control system: Siemens S7. Including buffer tank, Almatec AHS 25 heavy-duty membrane pump, MSE 470-30 chamber filter press, working platform, stainless steel filtrate tank and discharge and cross conveyor screw. Documentation available. On-site inspection is possible.