Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Process equipment and Chemical plants
Blowers 4 Centrifuges 8 Compressors 26 Decanter 1 Filter systems 36 Mills 11 Mixing machines 37 Other machinery and plants 14 Paper production 1 Presses 1 Pumps 9 Storage containers and tanks 21 Water treatment equipment 7
Innovac used-machines Process equipment and Chemical plants [1 - 20 of 176]
Mixing-System-Lödige-FKM-300-D used
Mixing System
Lödige FKM 300 D
Germany
1962
used
on request
INNO31115
A horizontal ploughshare mixer Gebrüder Lödige is available. Total volume: 300l, usable volume: 225l, mixing chamber diameter: 640mm, mixing chamber length: 1000mm, inlet opening diameter: 250mm, ground clearance: 800mm, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 500kg. An on-site inspection is possible.
more
Mixing-System-Werner-and-Pfleiderer-Simplex-14 used
Mixing System
Werner & Pfleiderer Simplex 14
Germany
unknown
used
on request
INNO31114
A universal batch mixer WP is available. Volume: approx. 140l, machine dimensions X/Y/Z: approx. 1500mm/900mm/1200mm, weight: approx. 500kg. An on-site inspection is possible.
more
Mixing-System-Engelsmann-CM-500 used
Mixing System
Engelsmann CM 500
Germany
unknown
used
on request
INNO31113
A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption.
more
Mixing-System-Mixaco-CM1000-D used
Mixing System
Mixaco CM1000-D
Germany
2002
used
on request
INNO31096
A double column cold mixing system Mixaco is available. Material: steel, usable volume: 800l, motor power: 30kW, mixing vessel: conical, mixing blades: dispersion blades, machine dimensions X/Y/Z: 2900mm/2850mm/3500mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible.
more
Mixing-System-Wam-MESC-300 used
Mixing System
Wam MESC 300
Germany
2023
used
on request
INNO31073
A continuous twin-shaft paddle mixer WAM is available. Throughput capacity range: 5m³-12m³/h, max. liquid addition: 20%, material: 1.4404, process: mixing/conditioning/granulation/neutralization, weight: approx. 700kg. Documentation available. An on-site inspection is possible.
more
Mixing-System-Wam-WBHP-15000 used
Mixing System
Wam WBHP 15000
Germany
2013
used
on request
INNO31072
A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible.
more
Mixer-Eirich-R15-RV-15 used
Mixer
Eirich R15/ RV 15
Germany
1996
used
on request
INNO31062
Suction capacity: 6m³, suction pressure: 20 mbar, mix outlet dimensions: 750x800mm. Includes documentation. On-site inspection is available.
more
High-Pressure-Compressor-Bauer-I-22.0-18.5 used
High Pressure Compressor
Bauer I 22.0-18.5
Germany
1995
used
on request
INNO31057
An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible.
more
Suction-and-Filtering-System-Ivat-Profi-Tower-RS-28.000K used
Suction and Filtering System
Ivat Profi-Tower RS 28.000K
Germany
2019
used
on request
INNO31051
Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.
more
Mixing-Station-Cavicchi-180RC used
Mixing Station
Cavicchi 180RC
Germany
1991
used
on request
INNO31037
A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.
more
Ventilation-System-Wolf-KGXD-160 used
Ventilation System
Wolf KGXD 160
Germany
unknown
used
on request
INNO31027
Supply air unit Wolf KGXD 160: air volume: 12,000m³/h, external pressure loss: 300Pa, heating capacity: 102.6kW, cooling capacity: 82.8kW, motor power: 7.5kW, rated current: 14.8/8.5A, speed: 1440rpm. Exhaust air unit Wolf KGXD 160: air volume: 12,000m³/h, external pressure loss: 300Pa, motor power: 5.5kW, rated current: 11.2/6.5A, speed: 1440rpm. System is fully functional, an on-site inspection is possible.
more
Ventilation-System-Wolf used
Ventilation System
Wolf
Germany
2012
used
on request
INNO31026
Size supply air: Top 21, supply air volume: 1840m³/h, length: 3764mm, width: 712mm, height: 508mm, weight: 333kg. Equipment: pocket filter F7 (short pockets) with differential pressure switch, high air purification efficiency, heater section (long), high-performance heat exchanger for reliable heating, cooling section, prepared for external cooling supply including droplet separator, fan (standard version), energy-efficient and low-noise, empty section with flow distributor, for optimal airflow guidance, silencer type 12, effective noise reduction. Accessories: canvas connection, equipotential bonding, differential pressure switch. System is fully functional, condition very good. An on-site inspection is possible.
more
Storage-Tank-Edelstahl used
Storage Tank
Edelstahl
Germany
1996
used
on request
INNO31019
A stainless steel storage tank with an integrated agitator is available. Calibration: 1996, Volume: 2700l, Pressure: non-pressurized, Material: presumably V2A, Bottom outlet: DN50 milk pipe. An on-site inspection is possible.
more
Suction-Unit-Kiekens-Dustmaster-4000 used
Suction Unit
Kiekens Dustmaster 4000
Germany
unknown
used
on request
INNO30986
A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.
more
Compressor-Atlas-Copco-GA37 used
Compressor
Atlas Copco GA37
Germany
2005
used
on request
INNO30942
A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.
more
Hydraulic-Unit-Lippold-BNK250-FCMP-200L used
Hydraulic Unit
Lippold BNK250/FCMP 200L
Germany
2012
used
on request
INNO30941
Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.
more
Compressor-Atlas-Copco-GA-22-VSD-FF used
Compressor
Atlas Copco GA 22 VSD FF
Germany
2010
used
on request
INNO30932
Air flow rate: 4.22m³/min, max. operating pressure: 12.8bar, motor power: 22kW, weight: approx. 560kg, operating hours: over 61000h. Documentation available. An on-site inspection is possible.
more
Compressor-Atlas-Copco-GA-37-VSD-GA-50-VSD-GA-30 used
Compressor
Atlas Copco GA 37 VSD/GA 50 VSD/GA 30
Germany
2007
used
on request
INNO30923
Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible.
more
Compressor-Boge-C-15-LDR-350 used
Compressor
Boge C 15 LDR-350
Germany
2017
used
on request
INNO30908
An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.
more
Mixing-System-Bohle-PM-1000 used
Mixing System
Bohle PM 1000
Germany
2004
used
on request
INNO30902
A Bohle container mixer is available. Mixing load: 900kg, Container volume: approx. 800l, Usable filling degree: 85%, Mixer speed: 6rpm, Container diameter: 1100mm, Machine height: 2800mm. An on-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 2
Automation-technology 59
Beverage-filling-technology 36
Complete-production-lines 1
Construction-machinery 28
Energy-management 130
Food-processing-and-beverage 160
Material-storage 60
Materials-handling-technology 69
Measurement-and-testing 74
Medical-equipment 11
Metal-processing-machines 1043
Mining 2
Office-equipment 3
Other-machines 65
Packaging-machines 227
Pharmaceutical-and-cosmetics 16
Plastics-processing-machines 180
Printing-machines 61
Process-equipment-and-chemistry 176
Packaging-material-machinery 73
Robotics 38
Surplus-goods 5
Textile-machinery 84
Utility-vehicles 8
Woodworking-machines 94