▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [101 - 120 of 995]

Remaining Stock

Wagner/dalex/omag WPB 42

Germany

unknown

used

on request

INNO30063

Various machines from a production line are available. 1) Band saw Wagner WPB 420. 2) Conventional soldering machine Dalex Technoplex. 3) Broaching press. 4) Guillotine shear Omag. 5) Jaw grinding machine Wagner. 6) Two electric induction heaters. 7) Two thread cutting machines. 8) Two crimping machines. An on-site inspection is possible. A package sale is preferred.

External Whirling Device

Procon AW 160

Germany

unknown

used

on request

INNO30060

An external whirling unit ProCon for external machining of threads and rotationally symmetrical shapes is available. Installation height: 180mm, motor power: 7.5kW, through hole of hollow spindle: 160mm, tilt angle right/left: 28°/45°, speed: 1800rpm, angular resolution: 0.1°, cutting circles: SK70/SK90, cutting circle pockets SK70/SK90: 4(6)/8, cutting circle bore SK70/SK90: 100mm/120mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

Saw

Hakumag FM1-R

Germany

1979

used

on request

INNO30053

A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.

CNC Lathe

Emco Turn 345

Germany

1998

used

on request

INNO30052

Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible.

CNC Machining Center

Heller MC 16

Germany

1998

used

on request

INNO30051

Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible.

CNC Tool Grinding Machine

Schneeberger MRG Gemini

Germany

1999

used

on request

INNO30049

A CNC 5-axis tool grinding machine Schneeberger is available. Travel X/Y/Z: 360mm/270mm/270mm, C-axis rotation range: +/-210°, Linear axis resolution: 0.001mm, C- and A-axis resolution: 0.0001°, max. grinding diameter: 250mm, center height: 210mm, Workpiece holder: ISO50, Spindle speed: 9000rpm, max. workpiece length: 400mm. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, Weight: approx. 5000kg, Control: Fanuc 16. Documentation available. An on-site inspection is possible.

CNC Universal Grinding Machine

Saacke UW II D

Germany

1997

used

on request

INNO30048

Axes: 5, travel X/Y/Z: 580mm/250mm/250mm, center height: 170mm, workpiece holder: ISO50, tool holder: HSK, max. workpiece diameter: 250mm, max. workpiece length: 430mm, feed rate: 15m/min, rated power: 30kW, weight: approx. 6400kg. An on-site inspection is possible.

Mandrel Bending Machine

Sommer S65

Germany

unknown

used

on request

INNO30047

A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible.

CNC Machining Center

Deckel Maho DMU 60E

Germany

1999

used

on request

INNO30046

Travel X/Y/Z: 600mm/525mm/500mm, rapid traverse: 15m/min, feed rate: 10m/min, speed: 12000rpm, spindle power: 10kW/15kW, spindle taper: SK40, tool positions: 25, table dimensions X/Y: 1000mm/540mm, max. table load: 350kg. Machine dimensions X/Y/Z: approx. 3000mm/2100mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 426M, operating hours: 34055h, spindle hours: 8787h. An on-site inspection is possible.

Milling Head

Pfauter-gleason Genesis 130 H/P200/PE250

Germany

unknown

used

on request

INNO30045

Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible.

CNC Vertical Machining Center

Stama MC 520

Germany

1994

used

on request

INNO30044

A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.

Press Brake

Knuth AHK 3180

Germany

2005

used

on request

INNO30043

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Longitudinal Seam Welder

Schnelldorfer ELENA 2100/II

Germany

2002

used

on request

INNO30042

A longitudinal seam welding system Schnelldorfer is available. Welding process: TIG, sheet materials: carbon steel/stainless steel/aluminum, sheet thickness range: 0.5mm-10mm, max. welding speed: 7m/min, welding length: 2100mm, min. pipe inner diameter: 165mm, max. pipe outer diameter: 800mm, rail dimensions X/Y: 40mm/15mm. Machine dimensions X/Y/Z: approx. 4400mm/1850mm/3300mm, weight: approx. 4300kg, control: Siemens S7. Documentation available. An on-site inspection is possible.

Mitre Band Saw

Meba E 220 G

Germany

unknown

used

on request

INNO30039

Saw band dimensions X/Y/Z: 2450mm/27mm/0.9mm, max. cutting capacity at 90°: 220mm/220mm, max. cutting capacity at 45°: 150mm/150mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 1300mm/800mm/1500mm, weight: approx. 250kg. An on-site inspection is possible.

CNC Machining Center

Fritz Wener TC 800

Germany

1984

used

on request

INNO30037

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

Laser Source

Trumpf TruDisk 4002 (4C)

Germany

2010

used

on request

INNO30026

Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter adjustment: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Center Lathe

Matra DLZ 630

Germany

unknown

used

on request

INNO30021

Swing diameter over bed/cross slide/offset: 630mm/340mm/700mm, center height: 290mm, distance between centers: 1500mm, speed: 1120rpm, machine dimensions X/Y/Z: approx. 3600mm/1500mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

Portal Straightening Machine

Edel Richtmaster 5025

Germany

1998

used

on request

INNO30019

Pressing force: 5000kN, max. operating pressure: 500bar, portal clearance: 2600mm, opening height: 470mm, max. straightening ram stroke: 500mm, min. edge distance: 375mm, rapid traverse: 450mm/min, straightening speed: 45mm/min, return speed: 1100mm/min, feed rate: 12m/min, max. feed force: 5000kN, table height: 1000mm. Machine dimensions X/Y/Z: approx. 4600mm/3250mm/3250mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

CNC Machining Center

Fanuc Robodrill Alpha-D21LiB5

Germany

2018

used

on request

INNO30018

A CNC drilling and tapping center Fanuc is available. Travel X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 250mm-580mm, axes: 5, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle taper: BT30, speed: 24000rpm, power: 26kW, torque: 35Nm, rapid traverse: 54m/min, feed rate: 30m/min, tool positions: 21, max. tool diameter: 80mm, max. tool length: 250mm, positioning accuracy: +/-0.006mm, repeatability: +/-0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 2100kg, control: Fanuc, operating hours: 25320h. Including coolant tank MCO with band filtration system and scraper conveyor, M&H 3D probe, Fanuc zero-point option, and spare spindle. Documentation available. An on-site inspection is possible. Expected to be available starting December 2026.

Welding Machine

Ess/merkle

Germany

unknown

used

on request

INNO30017

A total of 18 welding machines are available. 1-9) Welding machine ESS MIG-MAG 311, functional: 3, defective: 2, unclear: 4. Including wire feeder DVK-13 and partly hose package. 10) Welding machine Migatronic MTE 320. Including wire feeder CTU 3000. The hose package is defective. 11) Welding machine Merkle W420 AC/DC TIG Insquare, welding process: TIG, material: aluminum. 12) Welding machine EWM MIG 450 puls. Including wire feeder. 13) Welding machine WIG L-TEC TIG 404 AC/DC. 14) Welding machine Cloos GLC 450 N. Including wire feeder and hose package. 15) Welding machine Oerlikon CPGL 454. Including wire feeder VCW 454 and hose package. 16) Welding machine Stel HI-MIG 500P. Including hose package. 17) Plasma cutting machine Plasma 125. Including hose package. 18) Welding machine Merkle MIG/MAG M 325 DW. Including wire feeder DV30. Documentation available. An on-site inspection is possible.