▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [61 - 80 of 975]

CNC Plasma Cutting System

Microstep MG 16500

Germany

2014

used

on request

INNO29247

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014.

CNC Lathe

Okuma LB 15/LB 15 M/LB 15 W

Germany

unknown

used

on request

INNO29246

Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible.

CNC Turning- and Milling Center

Gildemeister GMX 400

Germany

2004

used

on request

INNO29245

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Tempering Furnace

Bättenhausen/loi

Germany

2008

used

on request

INNO29244

A heat treatment facility (2-chamber bogie hearth furnace) consisting of two furnaces is available. 1) Chamber furnace Bättenhausen Wärmetechnik GmbH, year of construction: 1991. 2) Chamber furnace LIO Poland, year of construction: 2008. Chamber dimensions X/Y/Z: 2x900mm/4300mm/1100mm, fuel: natural gas, temperature range: 350°C-1100°C, burners: 2x18, max. product dimensions X/Y/Z: 8800mm/3100mm/250mm, max. product weight: 18t. Process: Normalizing, tempering, soft annealing, austenitizing, hardening. Including a chimney, height: 38m. The plant is partly scrapped. Documentation available. On-site inspection is possible.

CNC Turning Center

Takisawa TC-4

Germany

1990

used

on request

INNO29242

Turning diameter: 450mm, orbital diameter over bed/face slide: 600mm/500mm, turning length: 1020mm, traverse path X/Z: 250mm/1100mm, rapid traverse X/Z: 12m/16m/min. Speed: 2500rpm, power: 22kW, spindle diameter: 100mm, spindle bore: 91mm, tool positions: 10, quill diameter: 110mm, quill stroke: 180mm. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2000mm, weight: approx. 6500kg, control: Fanuc Series 15-T. The control system has a fault. An on-site inspection is possible.

CNC Tool Milling Machine

Deckel Maho FP 2 A

Germany

unknown

used

on request

INNO29240

A Maho universal tool milling machine is available. Travel X/Y/Z: 300mm/300mm/400mm, quill stroke: 60mm, table dimensions X/Y: 390mm/620mm, max. table load: 250kg, tool holder: SK40, feed: 3600mm/min, rapid traverse: 4000mm/min, control: Dialog 11. Documentation available. On-site inspection is possible.

CNC Die Sinking Machine

Zimmer & Kreim ZK-1200

Germany

1998

used

on request

INNO29232

Travel X/Y/Z: 925mm/682mm/396mm, table dimensions X/Y: 1220mm/850mm, quill table distance: 650mm, dielectrum filling volume: 800l, filter cartridges: 4, electrode change: 16-fold, rinsing distributor positions: 12, rapid traverse: 2m/min, machine dimensions X/Y/Z: approx. 2200mm/2000mm/2750mm, weight: approx. 3700kg, operating hours: 50950h. The Z-axis must be adjusted, the machine control does not start up, the oil seals of the tank are leaking and the circulation pump is defective. Documentation available. On-site inspection is possible.

Upright Drilling Machine

Alzmetall AB 3 ESV

Germany

1955

used

on request

INNO29231

Drilling capacity: 40mm, spindle mount: MK4, drill chuck: 1mm-13mm, throat depth: 250mm, quill stroke: 160mm, table dimensions X/Y: 620mm/470mm, column diameter: 120mm, spindle speed: 1420rpm. Machine dimensions X/Y/Z: approx. 900mm/725mm/1800mm, weight: approx. 615kg. The on/off switch of the machine must be replaced. An on-site inspection is possible.

Welding Cell

Kuka flexibleCUBE DKP-400

Germany

2021

used

on request

INNO29225

A hardly used, compact Kuka gas-shielded welding cell with integrated robot, power source and media supply, especially for automated welding is available. Sides: 2, max. positioner load per side: 400kg, working area diameter and height: 700mm/800mm, robot type: Kuka KR10 R1420, robot repeat accuracy: +/-0.04mm, total system dimensions X/Y/Z: approx. 5850mm/4000mm/2700mm, weight: approx. 4000kg, operating hours: approx. 350h. Including a Fronius TPS 400i welding power source. Documentation available. On-site inspection is possible.

CNC Plate Drilling Machine

Wotan Rapid 2K

Germany

1983

used

on request

INNO29223

A CNC plate boring machine Wotan is available. Travel X/Y/Z/W: 6000mm/2500mm/800mm/600mm, tool positions: 60, spindle diameter: 130mm, tool holder: SK50, max. workpiece weight: 12500kg, rapid traverse: 10m/min. Rotary tables: 2, rotary table dimensions 1: 1250mm/1250mm, rotary table dimensions 2: 1600mm/1250mm, panel field dimensions X/Y: 6000mm/4000mm. Machine dimensions X/Y: approx. 12000mm/9000mm, weight: approx. 45000kg, control: Heidenhain iTNC 430, pendulum machining: possible. The machine was overhauled in 2015, the control system in 1998, including various accessories. The machine is at a standstill due to a cable break. Documentation available. On-site inspection is possible.

Decoiler

H. Schleicher H-3

Germany

1978

used

on request

INNO29218

Max. coil weight: 3t, max. strip width: 500mm, strip thickness: 0.4-5mm, connected load: 0.55kW. With control, straightener and hydraulic unit Rexroth, without documentation. On-site inspection is possible.

Eccentric Press

Hensel SK 50

Germany

unknown

used

on request

INNO29217

A Hansel eccentric punch is available. Pressing force: 50t, stroke: 8mm-120mm, stroke rate: 115/min, ram adjustment: 70mm, throat depth: 255mm, installation height: 380mm, table dimensions X/Y: 640mm/500mm, table adjustment: 220mm, ram dimensions X/Y: 550mm/170mm. On-site inspection is possible.

CNC Machining Center

Hüller Hille nbh 170R

Germany

2007

used

on request

INNO29215

Travel X/Y/Z: 1000mm/800mm/800mm, B-axis: 360°, pallet dimensions X/Y: 630mm/500mm, max. table load: 800kg, speed: 12000rpm, tool holder: HSK100, cassettes: 3, tool positions: 3x50, feed: 50m/min, rapid traverse: 50m/min. Machine dimensions X/Y/Z: approx. 7800mm/3500mm/3400mm, weight: approx. 24000kg, control: Siemens Sinumerik 840D. Including Kirchgässner MPS 170 multi-pallet storage system, year of manufacture: 2006, three-cassette magazine, Bürener cooling lubricant system and a double chip conveyor. The double chip conveyor is defective. Documentation available. On-site inspection is possible.

Punching and Laser Cutting Machine

Boschert CombiLaser TWIN 1500x3000 2kW

Germany

2016

used

on request

INNO28426

A hardly used fiber laser and punching machine Boschert including peripheral devices, overhauled by the original manufacturer in 2022, is available. 1) Boschert CombiLaser TWIN 1500x3000 Rotation, year of manufacture: 2016, punching heads: 2, punching force: 28t, processing range X/Y: 1500mm/3000mm, control: LABOD. 2) Fiber laser Kjellberg X-Focus 2000, year of manufacture: 2016, power: 2000W, cutting capacity mild steel/alloyed steel/aluminum: 15mm/8mm/6mm, laser class: 4, wavelength range: 1060nm-1100nm, weight: approx. 380kg. 3) Teka FilterCube 2N-3500, year of construction: 2016, air flow rate at 3000Pa: 3500m³/h, filter cartridges: 2, filter area per filter cartridge: 10m². Total system dimensions X/Y/Z: approx. 6500mm/5000mm/2100mm, weight: approx. 16200kg, system operating hours: 1265h, hydraulic hours: 361h, laser hours: 71h. Including Boschert Revotool 8-fold and various wear parts. Documentation available. On-site inspection is possible. Expected to be available from March 2025.

Centerless Grinding Machine

Aj-aicher CG16

Germany

2024

used

on request

INNO29210

A recently modernized Aicher grinding machine for continuous operation is available. Grinding range: 2mm-50mm, grinding wheel dimensions X/Y/Z: 405mm/205mm/203.2mm, regulating wheel dimensions X/Y/Z: 255mm/205mm/111.2mm, grinding spindle speed: 1350rpm. Cutting speed: 30m/s, regulating wheel speed: 300rpm, drive power grinding wheel/regulating wheel: 15kW/1.8kW, weight: approx. 2600kg. Hand tools included. Documentation available. On-site inspection is possible.

Centerless Grinding Machine

König & Bauer Multimat 150-6

Germany

unknown

used

on request

INNO29209

Grinding diameter: 100mm, max. workpiece length through-feed grinding/penetration grinding: 250mm/200mm, grinding wheel diameter: 500mm/600mm, grinding wheel bore: 304.8mm/254mm, regulating wheel diameter: 300mm, regulating wheel bore: 127mm/152mm, grinding and regulating wheel width: 200mm. On-site inspection is possible.

CNC Bed Milling Machine

Cme FS-3

Germany

unknown

used

on request

INNO29200

Travel X/Y/Z: 2500mm/1000mm/1400mm, table dimensions X/Y: 2500mm/850mm, max. table load: 6000kg, spindle mount: SK50, speed: 4000rpm, power: 22kW, rapid traverse: 20m/min, tool positions: 24, swivel: 2.5°, weight: approx. 16000kg, control: Heidenhain, operating hours: approx. 50000h. On-site inspection is possible.

CNC Universal Lathe

Gildemeister CTX-600

Germany

1997

used

on request

INNO29199

A cycle-controlled Gildemeister CNC universal lathe is available. Turning diameter over bed/face slide: 650mm/455mm, turning length: 1000mm, travel X/Z: 320mm/1097mm, spindle bore: 107mm, speed: 3150rpm, tool positions: 12, tool holder: VDI 50, quill diameter: 120mm. Machine dimensions X/Y/Z: approx. 5600mm/2400mm/2150mm, weight: approx. 8500kg, control: Grundig EltroPilot, operating hours: approx. 32564h. Including lunette and tools. Documentation available. On-site inspection is possible.

CNC Cycle Lathe

Gildemeister N.E.F. CT 20

Germany

unknown

used

on request

INNO29198

Turning diameter over bed/face slide: 280mm/185mm, center height: 240mm, travel X/Z: 250mm/160mm, spindle bore: 50mm, speed: 6000rpm, rapid traverse X/Z: 12m/min, tool positions: 12, tool holder: VDI 20, machine dimensions X/Y/Z: approx. 3100mm/1800mm/1700mm, weight: approx. 3200kg, control: Heidenhain EltroPilot L2, operating hours: 4229h. On-site inspection is possible.

Coil Winding Machine

Niehoff DSA.2

Germany

2015

used

on request

INNO29193

A Niehoff CNC wire spooling machine is available. Materials: copper/aluminum/iron/stainless steel/textile, wire diameter range: 0.05mm-0.4mm, spool speed: 5940rpm, spool speed: 600m/min. Total spool width: 108mm, max. spool weight: 3kg, spool axis: horizontal. Machine dimensions X/Y/Z: approx. 1500mm/1200mm/1900mm, weight: approx. 350kg. The machine had flood damage. The display is new and everything works except the spool deposit (probably a relay card error). Documentation available. On-site inspection is possible.