▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [741 - 760 of 1002]

Lathe

Boehringer DUE 560x2000

Germany

2007

used

on request

INNO26737

Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available.

Cold Forming Press

Fm 130

Germany

unknown

used

on request

INNO26727

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024.

Horizontal Machining Center

Hitachi Seiki HS 400

Germany

2002

used

on request

INNO26677

A 3-axis horizontal machining center with approx. 150 additional tools. Tool magazine SK40: 61 places. Travel X/Y/Z: 600mm/580mm/580mm, max. tool size: 400mm x 400mm, max. tool weight: 400kg. Power: 35-12000rpm, rapid traverse X/Y/Z: 50m/min, feed speed: 1-50000mm/min. Dimensions X/Y/Z: approx. 4000mm/3700mm/2900mm, weight: approx. 400kg. Operating time: 73,974h, machining time: 25,714h, machining cutting hours: 21,591h. Cabinets for tools can also be handed in. Documentation available.

Knuckle-Joint Press

Gräbener GKMP 360

Germany

1984

used

on request

INNO26640

Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg.

Vacuum Processing Plant

Veb Hochvakuum Dresden B90.1

Germany

1976

used

on request

INNO26634

Vacuum chamber volume: 0.62m³, weight: 2800kg, cooling water requirement: 700l/h. On-site inspection is possible.

Column Drilling Machine

Stankoimport 2H135

Germany

1980

used

on request

INNO26632

Max. Drilling diameter: 35 mm, Distance from spindle axis to column: 300 mm, Max. Spindle stroke: 250 mm, Max. Through-feed drill head: 170 mm. Table top dimensions: 450x500 mm, Number of spindle speeds: 12 from 31.5 - 1400 rpm, Overall machine dimensions: 1030х835х2535 mm, Weight: 1200 kg. On-site inspection is possible.

Filter System

Knoll VRF 1000/3200

Germany

2013

used

on request

INNO26621

An oil coolant system including an HSS recirculating cooling system is available. Total capacity: 5800 l, flow rate emulsion/oil: 1000/500 l/min, max. delivery pressure: 150 bar. Pumped liquid temperature: 80 °C, flow rate suction line/pressure line: 1m/s / 3m/s. Dimensions: Length 3200 mm, width 2120 mm, height 2735 mm. Accessories: Water cooler HSS type: DKB1000. Regularly serviced, with documentation. On-site inspection is possible.

Hydraulic Steel Shear

Bernardo HPS 90

Germany

2018

used

on request

INNO26601

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm

Circular Mitre Saw

Metallkraft MKS 350 V

Germany

2016

used

on request

INNO26596

Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.

Laser Welding Device

Bluelasertools Penwelder BLT 1500

Germany

2022

used

on request

INNO26595

Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new.

Continuous Annealing Furnace

Balzer + Co. DG 18x3x38

Germany

2001

used

on request

INNO26542

Usable chamber dimensions: 3800x1800x300mm, max. operating temperature: 1000°C, max. annealing temperature: 980°C, max. workpiece weight: 800kg, fuel: natural gas, connected load: 600kWh, with documentation, on-site inspection is possible.

Fully-Automatic Machining Center

Emmegi QUADRA

Germany

2007

used

on request

INNO26496

Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible.

Shearing Machine

Pivatic PivaCut

Germany

unknown

used

on request

INNO26491

Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.

One-Man Cointainer Cleaning Machine

Hobart UCX

Germany

unknown

used

on request

INNO26481

Output: 225 crates/h, with documentation, an inspection is possible.

CNC Plasma Cutting Machine

Haco PROXIMA 6025

Germany

2010

used

on request

INNO26474

Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible.

Copy Grinding Machine

Petewe Gmbh PFS 30-CNC

Germany

1983

used

on request

INNO26465

Was used to rework profile rollers for a hot rolling mill, was regularly serviced, with accessories, without spare parts, on-site inspection is possible, no videos available.

CNC Water Jet Cutting Machine

Expert cutExpert variojet

Germany

unknown

used

on request

INNO26460

Max. Plate dimensions: 2400x2100mm, table dimensions: 4100x3600x1450mm, water jet nozzles: 0.12/0.15/0.17/0.20/0.25mm, with documentation, 3D cutting head, drives, software, tools, spare parts package, and high pressure pump UHDE HPS 4022, multifunctional CAM cutting system with high precision, without abrasives, 3D 5-axis cutting head for flat cutting of different materials up to 45° bevel, with cutting nozzle make Allfi III/V, electrical height adjustment of the nozzle up to 200mm, for different material heights, dynamic servo drives for 90m/min, acceleration up to 70 m/s², machine frame in truss construction made of aluminum, cutting bridge, stainless steel water collection tray with water drain, stainless steel honeycomb elements as cutting table support, PC-based NC control Expert-PC and TFT monitor, cutting table, housing and hold-down device, on-site inspection is possible.

Spark Erosion Machine

Heun MD-435

Germany

2017

used

on request

INNO26434

X-travel: 400mm, y-travel: 350mm, z-travel: 250mm, W-travel: 300mm, max. load: 400kg, length: 1090mm, width: 1750mm, height: 2075mm, weight: 1.2t, with documentation.

Worm Grinding Machine

Klingelnberg HNC 35

Germany

1987

used

on request

INNO26401

Workpiece diameter: 10-350mm, max. grinding length: 660mm, clamping length: 1055mm, max. module: 25mm, swivel angle: +/-60°, grinding wheel dimensions: 300-500x100mm, with Faudi cooling lubricant belt filter and Elbaron oil mist separator. No longer fit for operation and can only be used as a basis for a complete overhaul.

Bevel Gear Cutting Machine

Klingelnberg SNC30

Germany

1987

used

on request

INNO26399

Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.