▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [481 - 500 of 983]

Remaining Stock

Klopp/müller/reinhardt FWU 13-6/MPS2/RAS 52.80

Germany

1970

used

on request

INNO28076

Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.

Deep Hole Drilling Machine

Heyligenstaedt

Germany

1951

used

on request

INNO28075

A Heyligenstaedt deep-hole drilling machine is available. Speed: 1120 rpm, turning diameter: 282 mm. The wedge bar chuck is of high quality and relatively new. An on-site inspection is possible.

CNC Lathe

Boehringer VDF 250C

Germany

1992

used

on request

INNO28061

Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025.

Coping Robot

Kaltenbach KC 1200

Germany

2010

used

on request

INNO28050

With notching robot Kuka + transport system T13 / M150, equipped with oxy-fuel torch for steel profiles, sheets, rectangular tubes. Number of axes notching system: 8, transport system infeed length set up: approx. 13.5m (1 long version still available), transport system outfeed length set up: approx. 10.0m (4 standard trestles still available), electronics for cross conveyor infeed and outfeed: completely included in the control cabinet (without cross conveyor), safety fencing: only partially set up (complete fencing available), safety light barriers: not set up (completely available). With documentation, an on-site inspection is possible.

CNC Double Spindle Lathe

Takisawa TT-500 GD

Germany

2018

used

on request

INNO28044

A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.

Roll Press

Köppern 52/7, 5ST315 DG 1 E 750x315

Germany

2018

used

on request

INNO28034

A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible.

CNC Fineblanking Press

Feintool GKP-F 160/GKP-F 250

Germany

2003

used

on request

INNO28033

There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible.

Lathe

Wmw DLZ 630 IV x2000

Germany

1983

used

on request

INNO28026

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

Slot Broaching Machine

Hahndor REWK 86/14

Germany

2007

used

on request

INNO28025

A Hahndorf grooving and broaching machine is available. Grooving: Stroke min./max.: 80mm/300mm, max. groove width: 34mm. Joint length: max. joint length: 300mm. Broaching: max. groove width: 14mm, max. broaching tool length: 640mm. Cutting speed forward/reverse: 3m/min, machine weight: approx. 300kg. Including various tools and accessories. Documentation available. On-site inspection is possible.

CNC Tool Grinding Machine

Smp Numaffut CA6

Germany

2001

used

on request

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.

CNC Machining Center

Hurco VMX 50

Germany

2006

used

on request

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

Upright Drilling Machine

Webo GRADUA 60

Germany

1973

used

on request

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

NC Powder Coating Plant

Wma Warsteiner Montage Und Anlagentechnik

Germany

2003

used

on request

INNO27978

Three-chamber pre-treatment dimensions: 3600x1200x1900mm, washing entrance dimensions: 700x1500mm, manual painting booth dimensions: 800x1700mm, cycle time: 6min. With residual moisture dryer, Gema Optiflex 2 powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible. Available in February 2025.

CNC Universal Milling Machine

Deckel FP4-60

Germany

1999

used

on request

INNO27977

Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible.

CNC Profile Machining Center

Tekna TK 426/3

Germany

1998

used

on request

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

Press

Gechter/burger SEM 70kN/DO 3

Germany

1990

used

on request

INNO27970

Two presses from different manufacturers are available. 1) Gechter SEM 70 KN, year of manufacture: 1990, pressing force: 70kN, type: knuckle-joint press, stroke: 5mm-62mm, max. installation height: 295mm, throat depth: 160mm, weight: approx. 350kg. 2) Two-stroke press Burger DO 3, pressing force: 3t, stroke rate: 80/min, throat: 140mm, stroke: 40mm, table dimensions X/Y: 280mm/380mm, working height: 810mm, ram surface: 115mm/100mm, machine dimensions X/Y/Z: approx. 800mm/1000mm/1400mm, weight: approx. 250kg. On-site inspection is possible.

Press Brake

Zlatokov Pmp Trenčín LODD 200

Germany

1982

used

on request

INNO27956

Pressing force: 1961kN, working width: 4000mm, table width: 200mm, working height: 800mm, stroke rate: 28/min, clear width: 3450mm, motor power: 22kW, length: 4420mm, width: 2060mm, height: 3800mm, weight: 22.66t. With comprehensive documentation, machine with age-related signs of use and wear, associated dies and matrices in usable but heavily worn condition. On-site inspection possible.

CNC Keyseating Machine

Balzat 32/300

Germany

1991

used

on request

INNO27947

Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.

Center Lathe

Weiler Primus-LZ GRF

Germany

1978

used

on request

INNO27944

A barely used Weiler precision lead and feed spindle lathe is available. Turning diameter over bed/slide: 250mm/180mm, turning length: 450mm, spindle clearance: 23mm-24mm, speed: 3000rpm, drive power: 1.5kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 600kg. Including accessories. On-site inspection is possible.

Universal Milling Machine

Misal 765/C

Germany

1984

used

on request

INNO27941

Travel X/Y/Z: 1270mm/660mm/530mm, feed X/Y/Z: 1500mm/1500mm/54mm/min, rapid traverse X/Y/Z: 2500mm/2500mm/750mm, spindle power: 9.2kW, speed: 1420rpm, spindle taper: NST 50, table dimensions X/Y: 1700mm/500mm. Documentation available. On-site inspection is possible.